Beretta.net

We had a high idle like you describe in the daughters 90 Beretta. It turned out that the firewall leak had caused the pins on the ECM to become corroded and one half the IAC wasn't connecting so it would go high and stay there. I cleaned the pins with WD40 and a tooth brush and used a number drill ...

Yeah, Slinky mentioned that. Would not oiling that up cause it to still idle high? If so, i can run out there and fix it. But i just slapped it in there to be honest. Yeah, i got cut-off on my parts adventure already. I've replaced the iacv, but i was honestly just going through some of the low budg...

Thanks for all the replies. Good advice all around. I ended up just taking off the throttle body. no big, just wanted to avoid it if possible. I did end up cleaning the crap out of it. used a soft plastic wire brush, put on the new sensor. still not fixed. i'll do a vacuum check later, if it's not f...

oh, getting the bolt unscrewed won't be the problem. it's just the bent pipe that is getting in the way.

Okay, I've done some searching, found nothing that answered my specific question. But if it's there, please let me see it. So, I'm trying to replace the throttle position sensor, but i want to know which is the easiest way to get access to the sensor. if i try to just unbolt it. I can't. There is a ...

(if this is in the wrong section, please move it.) Hey retta owners, Got a question and didn't know where to look. Reference: 88 base/4 spoke steel 14's Is there any sort of way I can decrease my turning radius? (i.e.) take less than a city block to pull a u-turn. I've heard some people swapping knu...

I was thinking about running out to u-pull-it and looking for a pretty decent looking one, but for the direct acting bar and links. do we have part numbers just in case i run out of luck tho?

Hey guys, I got a question that I looked for a bit and didn't seem to find the right answer for so here it is. I have a 88 base with the v6 and normal suspension. I'm looking at picking up a new set of sway bars as my rear bar is broken and If I'm down there....why not. So which would be the best ba...

Who's the owner of the white z26 just outside of greenfield?. Saw it the other day as i was traveling. Looked good on the first pass, didn't see it after that.

Well, I'm actually on the Iowa side of that town. But thanks for the welcome.

New to the boards and seeing who's in the area? Let me know. I'm driving the silver base around town and looking for help to put in a 3.1

I'd be up for going too, just trying to get some ideas for my beretta.
If it's after September I'll be legally allowed to drive again, so after then is good for me.