Beretta.net

If I remember correctly, reverse and second gear should always work in the 4T60-E no matter what is going on electrically. Sounds like a mechanical failure.

This may help...

GM shows 16517823 is for 91-93

The fuel sending unit has an isolated ground. You should be able to swap the wiring between them if you're careful, I did this on mine.

The FG11A looks like the one you'd need with the 4-wire plug, however it's not listed for the Beretta, but other cars with digital gauges.

I would measure the resistance on the fuel injectors. I've had many that will cause the same symptoms because of an internal short. They should measure approximately 12 ohms when good.

The lighting is all handled in a separate harness on the drivers side.

That number is a little off.. Are you sure it isn't supposed to be 1G1LZ13A7NY162481 ?

Try this for a start...

http://rodneydickman.com/catalog/produc ... cts_id=278

Has to be a 4.8. The 5.3s are all automatics.

3X00-Modified wrote:I'm not sure how the HPTuning scanner software works it may or may not support that.

Scanning is unlimited. The only thing you need credits for is to write a PCM.

Sounds like you may have a broken or disconnected shift cable, possibly very worn or missing shifter bushings.

You should have evidence of leaking fluid somewhere. If you can't find it under the car or coming from a wheel cylinder or caliper, then it may be the master cylinder leaking into the brake booster.

The newer style end link came out in '92 along with the new struts with different upper mount and larger brakes.

That stabilizer link definitely needs to be replaced. It looks like the struts are new, did you reinstall the mounting bracket for the stabilizer link when you swapped the struts?

The actual firing order of the engine is 1-2-3-4-5-6. The 1-4 6-3 2-5 is just how the wires are attached to the coils due to the waste-spark ignition. Electronic Ignition (EI) System The electronic ignition system controls fuel combustion by providing a spark to ignite the compressed air/fuel mixtur...