Brand new tails
Brand new tails
One of the parts i love on looks of Beretta is the tails, too bad the ones i had, were everything else than impressive, water inside, cracks outside, most of you know what i mean.
So, i got bored of the old ones, and ordered brand new ones, to get the looks back.
These are not the GM ones, instead branded TYC and are made in Taiwan, ordered em from Rockauto.com and costed lil over 100 USD piece.
Inside the box
Protective plastic
Here's what i think:
Looks: 10/10 REALLY shiney, sharp and all
Fit: 8/10 (the passenger side i got had warped gasket witch needs adjusting)
Quality: 6½/10 because these ain't that dark as the stock ones. you will see the difference in the parts when compared to stock ones.
So, i recommend these to anyone who has cracked\warped\scratched\faded\else tails, as we know our cars are getting so old that there will soon be a time when these are discontinued, i'd suggest to get a set while you still can.  Or actually get new GM set instead for maximum results.
So, i got bored of the old ones, and ordered brand new ones, to get the looks back.
These are not the GM ones, instead branded TYC and are made in Taiwan, ordered em from Rockauto.com and costed lil over 100 USD piece.
Inside the box
Protective plastic
Here's what i think:
Looks: 10/10 REALLY shiney, sharp and all
Fit: 8/10 (the passenger side i got had warped gasket witch needs adjusting)
Quality: 6½/10 because these ain't that dark as the stock ones. you will see the difference in the parts when compared to stock ones.
So, i recommend these to anyone who has cracked\warped\scratched\faded\else tails, as we know our cars are getting so old that there will soon be a time when these are discontinued, i'd suggest to get a set while you still can.  Or actually get new GM set instead for maximum results.
I fill up for $130. Also Beretta owner since 2004
Brand new tails
damn! those look great! Mine are cracked in the usual spot, and have collected some dirt road dust inside.
-
6r8ph1X
- Registered User
- Posts: 357
- Joined: Mon Apr 09, 2007 11:07 pm
- Location: Beavercreek, Ohio
- Contact:
Brand new tails
dam dude, those look fly! real fresh look. Good buy man!
1993 Beretta GT, FX Designs Body Kit, Ram Air hood, 3.1 MPFI 3 Speed, 90,000 miles
1996 Beretta Base, GTU conversion, 3400sfi with less than 100,000 miles == Traded
Brand new tails
Looks good for sure, nice find, maybe you should post more info about where you got them and for how much in case anyone else wants them.
BMAN
BMAN
BMAN
-
SuzukiGhostRider
- Registered User
- Posts: 2464
- Joined: Tue Feb 12, 2008 4:07 am
- Location: Milan NM
- Contact:
Brand new tails
they look great, but didn't your car have the euro's?
1988 Beretta GT 5 speed - 1st car... Gone to the crusher. 
1989 Beretta GT Z-51
1994 Beretta Z26 getting FE7+Z51 goodies
1987 Pontiac Bonneville LG3+4T65-E
1987 Chevrolet Celebrity Wagon L36+4T65-E
1998 Chevrolet C1500 5.7L L31+ built 4L60-E
1989 Beretta GT Z-51
1994 Beretta Z26 getting FE7+Z51 goodies
1987 Pontiac Bonneville LG3+4T65-E
1987 Chevrolet Celebrity Wagon L36+4T65-E
1998 Chevrolet C1500 5.7L L31+ built 4L60-E
-
SuzukiGhostRider
- Registered User
- Posts: 2464
- Joined: Tue Feb 12, 2008 4:07 am
- Location: Milan NM
- Contact:
Brand new tails
Yea, but imagine this... The Euros are especially tight to us Americans. So what do you think might be rare and tight over there? US tails?
-
BerettaLove32
- Registered User
- Posts: 297
- Joined: Wed May 29, 2002 5:40 pm
- Location: Chicago
- Contact:
Brand new tails
His GT is not Euo Spec. Oh..... one other thing...... kind of a faux pas that an american car has parts that are being made from Japan now
John
'01 Duratec Sable Wagon
'01 Duratec Sable Wagon
-
Asylum
- Registered User
- Posts: 3050
- Joined: Wed Mar 31, 2004 9:36 am
- Location: Hamilton, Ontario, Canada
- Contact:
Brand new tails
Eric
Asylum Motorsports
"Where we're not happy 'til YOU'RE not happy!
'91 California Quad (Gone with just a bit of "Seller's Remorse".)
'92 3500 GT gone and not really missed. It was fun. Documented 13.47 N/A.
Asylum Motorsports
"Where we're not happy 'til YOU'RE not happy!
'91 California Quad (Gone with just a bit of "Seller's Remorse".)
'92 3500 GT gone and not really missed. It was fun. Documented 13.47 N/A.
-
Mike Morris
- Registered User
- Posts: 52
- Joined: Tue Sep 12, 2006 10:21 pm
- Location: Dc/MD
- Contact:
Brand new tails
I too bought ones but went with new GM ones. Mine were mint but I wanted new.
Like you wanted a new filler panel. Found one but need the damn lettering:(
Those tails look nice!
Like you wanted a new filler panel. Found one but need the damn lettering:(
Those tails look nice!
www.mk3.us/mike
2006 Z06 Corvette
1992 Mustang 5.0 blown stroked and intercooled
1988 Supra Turbo 512 RWHP
1988 MR2 SC-restored
1983 Corolla SR5 hatchback restored
1990 MINT GTZ now upgraded to W41 specs. Garaged all its life....
2006 Z06 Corvette
1992 Mustang 5.0 blown stroked and intercooled
1988 Supra Turbo 512 RWHP
1988 MR2 SC-restored
1983 Corolla SR5 hatchback restored
1990 MINT GTZ now upgraded to W41 specs. Garaged all its life....
-
DUNCAN05
- Registered User
- Posts: 99
- Joined: Tue Oct 24, 2006 12:04 am
- Location: Roswell, New Mexico (CTR)
Brand new tails
Those look great!!!!
Winner of the Endless Ride Award Berettafest 2007 (3,630mi RT)
Bring Berettafest back West!
If you have a nice set of dew strips please PM me.
-
berettaspeed15
- Registered User
- Posts: 27
- Joined: Sun Sep 16, 2007 3:51 pm
- Location: STL