Page 1 of 1

Sway Bar End Links

Posted: Sat Jun 17, 2017 12:32 pm
by Exciter570
Hi all, I had the GTZ in for a state inspection this morning and it failed for a broken sway bar end link. The shop tried to source the part and advanced auto brought 2 different ones over, neither one was a fit. I'm sure it is because the car is a GTZ and has a different suspension than a base or GT Beretta but the shop was no help in finding the proper part.

So before I go ahead and order what I think is the right part from Rock Auto, Napa, etc..my question to you all is what is the proper part to replace the sway bar end link on the GTZ? This is what I'm thinking is right? https://www.napaonline.com/en/p/PCQ1882 ... hIndex=App

Is this right? Any other options? I'd prefer to use an AC Delco or GM part if possible, not too fond of no-name napa brand..

Thank you!

Re: Sway Bar End Links

Posted: Sat Jun 17, 2017 1:17 pm
by Cliff8928

Re: Sway Bar End Links

Posted: Sat Jun 17, 2017 1:31 pm
by Exciter570
Thanks, Cliff. That's what the pic from Napa shows as well, just from a different angle... big price difference though..the one from autozone is twice as expensive..any idea why?

Found this at Rock Auto too. It's an AC Delco part, specifies it's for the front w/ FE7 suspension, which is the suspension that the GTZ's have, correct? I'm a bit rusty with my Beretta knowledge..

Page: http://www.rockauto.com/en/catalog/chev ... +link,7580
Part info: http://www.rockauto.com/en/moreinfo.php ... 96&jsn=461

Re: Sway Bar End Links

Posted: Mon Jun 19, 2017 11:08 pm
by woody90gtz
Yes, FE7 is what you're looking for.