Getrag 282 rebuild kit
- themixer
- Registered User
- Posts: 1569
- Joined: Fri Aug 14, 2009 12:13 pm
- Location: Truro, Nova Scotia. Canada
Getrag 282 rebuild kit
Well I may have caused damage to my 3400 swapped cars transmission, had a LOT of fun doing it, and have much less tire tread. The speedometer started acting a little strange, will jump up and down when driving above 60 or so. Thought about a VSS but my last Beretta this happened to the transmission was on the way out, this one has over 80,000km of abuse on it (about 250k on it). Not to mention the stresses of having the incorrect engine mount and chewing up about 10 sets of axles.
So with plans of installing a chemical supercharger on the 3400, I need to be sure the transmission is in good shape. So a friend of mine had a drive train from a 1990 Beretta GT 5 speed sitting in a field for about the last 10 years. Transmission was still filled with oil at proper point on dip stick! Anyways did a few searches for the rebuild kits and have found old links (edited for 3x00-modifed) I searched THIS website for information.
I will be sending this to the local Chevrolet dealership for the rebuild but need to find parts as everything is discontinued. Wondering if anyone has rebuilt them what kits they have used and what components need to be replaced?
So with plans of installing a chemical supercharger on the 3400, I need to be sure the transmission is in good shape. So a friend of mine had a drive train from a 1990 Beretta GT 5 speed sitting in a field for about the last 10 years. Transmission was still filled with oil at proper point on dip stick! Anyways did a few searches for the rebuild kits and have found old links (edited for 3x00-modifed) I searched THIS website for information.
I will be sending this to the local Chevrolet dealership for the rebuild but need to find parts as everything is discontinued. Wondering if anyone has rebuilt them what kits they have used and what components need to be replaced?
Last edited by themixer on Wed Dec 17, 2014 10:40 am, edited 1 time in total.
- 3X00-Modified
- Administrator
- Posts: 10912
- Joined: Thu Jul 05, 2007 9:18 am
- Location: Brooklyn CT
Re: Getrag 282 rebuild kit
All I did was search google for HM282 rebuild kit..... You guys gotta do this stuff more often...
http://www.americanpowertrainwarehouse. ... its-82-94/
http://cobratransmission.com/index.php? ... ath=2_1941
http://www.americanpowertrainwarehouse. ... its-82-94/
http://cobratransmission.com/index.php? ... ath=2_1941
- themixer
- Registered User
- Posts: 1569
- Joined: Fri Aug 14, 2009 12:13 pm
- Location: Truro, Nova Scotia. Canada
Re: Getrag 282 rebuild kit
My dear jesus your amazing at doing google searches! You must work in IT just like me? Yes I did do this, but moreso looking for peoples experience
hence my question:
"Wondering if anyone has rebuilt them what kits they have used and what components need to be replaced?"
hence my question:
"Wondering if anyone has rebuilt them what kits they have used and what components need to be replaced?"
- woody90gtz
- Registered User
- Posts: 4703
- Joined: Thu Jul 11, 2002 8:45 pm
- Location: Walton, NY
- Contact:
Re: Getrag 282 rebuild kit
I got a kit from AutoZone, and then additional stuff like synchros from mantrans on ebay.
I thought I did a writeup on the build, but dont find it...
I thought I did a writeup on the build, but dont find it...
91 "SS" - WOT 3400/5spd - 13.29@101.6 - World's fastest N/A FWD Beretta
96 "T56" LS/6spd/8.8 RWD swap - 13.45@104.7 lol
GEARHEAD dezign youtube
96 "T56" LS/6spd/8.8 RWD swap - 13.45@104.7 lol
GEARHEAD dezign youtube
- woody90gtz
- Registered User
- Posts: 4703
- Joined: Thu Jul 11, 2002 8:45 pm
- Location: Walton, NY
- Contact:
Re: Getrag 282 rebuild kit
I do have an album, but I guess I never did the write up. I also have a factory assembly manual in PDF form.
http://www.motortopia.com/cars/1991-che ... uild-32579
haha
http://www.motortopia.com/cars/1991-che ... uild-32579
haha
91 "SS" - WOT 3400/5spd - 13.29@101.6 - World's fastest N/A FWD Beretta
96 "T56" LS/6spd/8.8 RWD swap - 13.45@104.7 lol
GEARHEAD dezign youtube
96 "T56" LS/6spd/8.8 RWD swap - 13.45@104.7 lol
GEARHEAD dezign youtube
- themixer
- Registered User
- Posts: 1569
- Joined: Fri Aug 14, 2009 12:13 pm
- Location: Truro, Nova Scotia. Canada
Re: Getrag 282 rebuild kit
Thanks for the reply ! I wish we had autozone up here in Canada seems like sometimes they have what is required. I will take a look at the syncos on eBay!
-
- Registered User
- Posts: 1255
- Joined: Sun Mar 12, 2006 12:11 am
- Location: Rochester New York
- Contact:
Re: Getrag 282 rebuild kit
If u need help getting the stuff shipped up to u let me know willing to help u
93 GT cammed 3500 TORSEN, headers,intake,wilwood,poly/delrin mounts, 2.5 S.S,Exhaust,dickman kits,GTUspoiler,Euro headlights-tails-mirrors-fender flares-spoiler,Intrax/Koni,91+blk interior,rr disk swap,s.s.clutch line
- 3X00-Modified
- Administrator
- Posts: 10912
- Joined: Thu Jul 05, 2007 9:18 am
- Location: Brooklyn CT
Re: Getrag 282 rebuild kit
This is the kit on Autozone. Without synchros.
http://www.autozone.com/drivetrain/manu ... 08_148664/
http://www.autozone.com/drivetrain/manu ... 08_148664/
Re: Getrag 282 rebuild kit
You want to get the original assembly platform tool, makes things about thousand times easier.
Good luck tho, I managed so score one from ebay after several years of looking...
Good luck tho, I managed so score one from ebay after several years of looking...
Re: Getrag 282 rebuild kit
Sorry for thread jack. If anyone has a detent cover for the 282 they'd be willing to sell.. lemme know..
95' BRM Z26. cammed/ported 3400/3500 Hybrid. HM282, OBD2, Garret T3/T04E 60 Trim, IC.heavywoody wrote:Beretta, fast, reliable, and cost effective are words that should not be used in the same sentence.
- themixer
- Registered User
- Posts: 1569
- Joined: Fri Aug 14, 2009 12:13 pm
- Location: Truro, Nova Scotia. Canada
Re: Getrag 282 rebuild kit
http://www.ebay.ca/itm/MUNCIE-282-FWD-F ... 5416958dd6
asking to see if he can include the input shaft bearing/seal maybe i can get it all in one shot
if not the autozone kit does have this seal for sure? looking at an old post, it seems to
http://www.beretta.net/forum/viewtopic.php?f=8&t=9302
asking to see if he can include the input shaft bearing/seal maybe i can get it all in one shot
if not the autozone kit does have this seal for sure? looking at an old post, it seems to
http://www.beretta.net/forum/viewtopic.php?f=8&t=9302
- 3X00-Modified
- Administrator
- Posts: 10912
- Joined: Thu Jul 05, 2007 9:18 am
- Location: Brooklyn CT
Re: Getrag 282 rebuild kit
PM sent...Z26_T wrote:Sorry for thread jack. If anyone has a detent cover for the 282 they'd be willing to sell.. lemme know..
1989 SuperCharged 3800 Srs-II (First)Six-Speed GTU
1990 Turbo 3.4 5-Speed T-Type
1990 4.0L 4-Cam 32-Valve V-8 5-Speed Indy GTi (Project)
1990 Stock(!) 3.1 MPFI Auto Indy
1995 LA1/L82 4T60E Z-26
1995 3.4 DOHC Turbo 5-Speed Z-26
1990 Turbo 3.4 5-Speed T-Type
1990 4.0L 4-Cam 32-Valve V-8 5-Speed Indy GTi (Project)
1990 Stock(!) 3.1 MPFI Auto Indy
1995 LA1/L82 4T60E Z-26
1995 3.4 DOHC Turbo 5-Speed Z-26
- themixer
- Registered User
- Posts: 1569
- Joined: Fri Aug 14, 2009 12:13 pm
- Location: Truro, Nova Scotia. Canada
Re: Getrag 282 rebuild kit
Well after getting this news from Woody, I called the manufacturer that AutoZone got the parts from, they have not made this kit since 2001
Sorry, at least one of the special order items in your cart is no longer available. The item is highlighted below. Please remove the item or adjust the quantity before proceeding to checkout.
For Your 1991 Chevrolet Beretta 3.1L MFI OHV 6cyl
ATC Pro King/Manual Transmission Rebuild Kit
Part Number: BK234
Application: HM282, MR10 Muncie Transmission.
Notes: Without synchros
Warranty: 1 YR
Sorry, the requested quantity for this special order item is not available. Please adjust the quantity.
Also looked up this part number from 3X00-Modified, I am told that is not the right bearing
GM/ACDELCO AUTO PARTS 14082039 COVER DETENT HOLDER 0.1 11
After consulting the dealer I believe the correct part number is 14092066
found this on ebay:
http://www.ebay.ca/itm/Motorcraft-GE49- ... 2d&vxp=mtr
says its for a beretta but not the same year the part number is listed however.
What are the options for an interchange? or is vintage parts the only option
GENERAL MOTORS CORP. 14092066 BEARING UNIT
OEM PART NUMBER: 14092066
OEM Manufacturer: GM
This product is manufactured by Timken and provides a compatible interchange with the GM 14092066.
Timken Part Number: 305DD
http://www.seekbearing.com/bearing/14092066.html
Also showing the kit might be still available at Advance auto parts? Another store we don't have in Canada
http://shop.advanceautoparts.com/p/pro- ... 20150053-P
seems to be the same kit that was available at autozone
Sorry, at least one of the special order items in your cart is no longer available. The item is highlighted below. Please remove the item or adjust the quantity before proceeding to checkout.
For Your 1991 Chevrolet Beretta 3.1L MFI OHV 6cyl
ATC Pro King/Manual Transmission Rebuild Kit
Part Number: BK234
Application: HM282, MR10 Muncie Transmission.
Notes: Without synchros
Warranty: 1 YR
Sorry, the requested quantity for this special order item is not available. Please adjust the quantity.
Also looked up this part number from 3X00-Modified, I am told that is not the right bearing
GM/ACDELCO AUTO PARTS 14082039 COVER DETENT HOLDER 0.1 11
After consulting the dealer I believe the correct part number is 14092066
found this on ebay:
http://www.ebay.ca/itm/Motorcraft-GE49- ... 2d&vxp=mtr
says its for a beretta but not the same year the part number is listed however.
What are the options for an interchange? or is vintage parts the only option
GENERAL MOTORS CORP. 14092066 BEARING UNIT
OEM PART NUMBER: 14092066
OEM Manufacturer: GM
This product is manufactured by Timken and provides a compatible interchange with the GM 14092066.
Timken Part Number: 305DD
http://www.seekbearing.com/bearing/14092066.html
Also showing the kit might be still available at Advance auto parts? Another store we don't have in Canada
http://shop.advanceautoparts.com/p/pro- ... 20150053-P
seems to be the same kit that was available at autozone