For sale feeler. 46131 Turbo kit 3x00 Wot-tech heads, intakes, etc.
Posted: Tue Mar 28, 2017 9:44 pm
Just putting a feeler out there to sell some parts off the car. I wanted to get some new flanges welded on the headers.. ended up pulling off the heads and such to use as a jig. Deciding if I want to go to a different turbo and set up and such. Seeing if there was any interest for what I currently have before I reinstall.
Wot-tech 3500 heads with comp cam springs. Equivalent to his stage 2
Wot-tech ported 3100 wide port UIM. Stage 2 with 65mm tb opening
Wot-tech ported 3500 LIM stage 2
TCE 65mm TB
1700 plus ship for everything above
Headers built by forced firebird- updated flanges now installed. Was on loner666s corsica initially.
Garret t3t4 .60 trim turbo
Large ebay Intercooler plus all piping and couplers
Down piping and cross over tube
Innovate lc1 wide band
Street glow pyrometer
42.5lb injectors
Plenum spacers (will be required for how the downpipe routes)
Straight thermostat housing and upper radiator hose to route around the turbo.
Wastegate and tial BoV
2500 plus ship for above and anything else needed to install the turbo
This was on my 95 with a getrag 282 with the large top Mount trans mount. Not sure if it'll be bolt on for a auto trans, but I'd think it would.
I'm in 46131. Willing to drive anywhere nearby within reason.
Lmk if anything is unreasonable. Will provide pics on request. My build thread has some pictures of how it looked when I installed it all. Only put about 4k on it since I built it. The car desperately needs an LSD and some suspension upgrades since it's a bit scary with the power it puts down which is why it wasn't driven much.
Or if you want it all installed back on the car and want to buy the whole car running Lmk that too. Shoot me an offer. I have another beretta that can become my fun car.
Wot-tech 3500 heads with comp cam springs. Equivalent to his stage 2
Wot-tech ported 3100 wide port UIM. Stage 2 with 65mm tb opening
Wot-tech ported 3500 LIM stage 2
TCE 65mm TB
1700 plus ship for everything above
Headers built by forced firebird- updated flanges now installed. Was on loner666s corsica initially.
Garret t3t4 .60 trim turbo
Large ebay Intercooler plus all piping and couplers
Down piping and cross over tube
Innovate lc1 wide band
Street glow pyrometer
42.5lb injectors
Plenum spacers (will be required for how the downpipe routes)
Straight thermostat housing and upper radiator hose to route around the turbo.
Wastegate and tial BoV
2500 plus ship for above and anything else needed to install the turbo
This was on my 95 with a getrag 282 with the large top Mount trans mount. Not sure if it'll be bolt on for a auto trans, but I'd think it would.
I'm in 46131. Willing to drive anywhere nearby within reason.
Lmk if anything is unreasonable. Will provide pics on request. My build thread has some pictures of how it looked when I installed it all. Only put about 4k on it since I built it. The car desperately needs an LSD and some suspension upgrades since it's a bit scary with the power it puts down which is why it wasn't driven much.
Or if you want it all installed back on the car and want to buy the whole car running Lmk that too. Shoot me an offer. I have another beretta that can become my fun car.