WTB 92+ V6 5spd Tranny
WTB 92+ V6 5spd Tranny
Simple, can't find any locally so... does anyone have one laying around? Atleast a v6 bellhousing so I can swap my quad trans to v6 bellhousing. ( I know quad tranny has different gearing but for now that'll do)
Doesn't matter, internal or external slave. But trans has to be 92+ for the mounts.
Also, does anyone know if the quad 4 trans jackshaft will work on the v6? Probably not....just wondering. Also would need one if it doesn't fit.
I would probably have to get it shipped unless someone has one in south Texas. ...? Price shipped to 78577.
Thank You.
Doesn't matter, internal or external slave. But trans has to be 92+ for the mounts.
Also, does anyone know if the quad 4 trans jackshaft will work on the v6? Probably not....just wondering. Also would need one if it doesn't fit.
I would probably have to get it shipped unless someone has one in south Texas. ...? Price shipped to 78577.
Thank You.
1of 896 Quad4 Z26's....now 3500 5spd swapped!-sold
'14 C7 Z51 7SPD
- woody90gtz
- Registered User
- Posts: 4703
- Joined: Thu Jul 11, 2002 8:45 pm
- Location: Walton, NY
- Contact:
Re: WTB 92+ V6 5spd Tranny
Just posted in your other thread but see you're from Texas...and my spare stuff is the old style mounts. Find a v6 92-93 will be tough...most of them were earlier. You can drill an older bell for the 92+ mounts. I've looked into that because of my header clearance issue with my 91 mounts.
91 "SS" - WOT 3400/5spd - 13.29@101.6 - World's fastest N/A FWD Beretta
96 "T56" LS/6spd/8.8 RWD swap - 13.45@104.7 lol
GEARHEAD dezign youtube
96 "T56" LS/6spd/8.8 RWD swap - 13.45@104.7 lol
GEARHEAD dezign youtube
- SummitBalt08
- Registered User
- Posts: 1062
- Joined: Fri Jun 04, 2010 11:10 am
- Location: Sidney, Ohio
- Contact:
Re: WTB 92+ V6 5spd Tranny
Would a cavalier 3.1 5 speed trans from a 92 work?
Sent from my EVO LTE using Tapatalk 2
Sent from my EVO LTE using Tapatalk 2
-Shawn
Been on the Beretta Forums since '04
94 Black Quad 5 spd Z26 ->3500 6 spd ZR6
Bfests '11,'12,'14
July 2012 Bnet Calendar
Been on the Beretta Forums since '04
94 Black Quad 5 spd Z26 ->3500 6 spd ZR6
Bfests '11,'12,'14
July 2012 Bnet Calendar
Re: WTB 92+ V6 5spd Tranny
Top mount maybe, but can't make the older bell housing work with the newer front mount, totally different casting there.woody90gtz wrote:You can drill an older bell for the 92+ mounts.
Quad trans with V6 bellhousing works.
The gearing is not that different than in V6 and both gearing's do suck. I'd make sure to use 3.64 FDR at least.
I'd recommend changing all the drive train mounts to pre 92 style, since they are superior when used with manual transmission. / 0.02€
I think Cavaliers never got the new horrible style mounting.
- 3400beretta
- Registered User
- Posts: 281
- Joined: Fri Mar 10, 2006 2:21 am
Re: WTB 92+ V6 5spd Tranny
You can use the Quad 4 jack shaft, but you will have to make up a custom bracket to mount it to the engine. You MUST modify the V6 bracket anyway to use it so its up to you what you wanna do. The 3500 has slightly different mounting points on the block for that bracket compared to 3400s and 3100s, its very close but DO NOT force it or you will kill your diff bearings in the trans.
Also, if you use the Quad 4 jackshaft, make sure the pass side axle is a quad axle. And likewise with a v6 jackshaft, match it with a v6 axle. The quad jackshaft is about 3/4 of an inch longer than the V6 shaft, so the axles are different lengths to compensate.
Oh and one more thing - I know you are dying to get the swap done but I wouldn't bother with swapping bellhousings and using your quad tranny. 1st gear will be totally useless if you do. There are V6 transmission out there, did you look on www.car-part.com? Check both 92 and 93 years, you can use either or, but they will not crossreference because one is internal slave and one is external.
Also, if you use the Quad 4 jackshaft, make sure the pass side axle is a quad axle. And likewise with a v6 jackshaft, match it with a v6 axle. The quad jackshaft is about 3/4 of an inch longer than the V6 shaft, so the axles are different lengths to compensate.
Oh and one more thing - I know you are dying to get the swap done but I wouldn't bother with swapping bellhousings and using your quad tranny. 1st gear will be totally useless if you do. There are V6 transmission out there, did you look on www.car-part.com? Check both 92 and 93 years, you can use either or, but they will not crossreference because one is internal slave and one is external.
Re: WTB 92+ V6 5spd Tranny
3400beretta wrote:You can use the Quad 4 jack shaft, but you will have to make up a custom bracket to mount it to the engine. You MUST modify the V6 bracket anyway to use it so its up to you what you wanna do. The 3500 has slightly different mounting points on the block for that bracket compared to 3400s and 3100s, its very close but DO NOT force it or you will kill your diff bearings in the trans.
Also, if you use the Quad 4 jackshaft, make sure the pass side axle is a quad axle. And likewise with a v6 jackshaft, match it with a v6 axle. The quad jackshaft is about 3/4 of an inch longer than the V6 shaft, so the axles are different lengths to compensate.
Oh and one more thing - I know you are dying to get the swap done but I wouldn't bother with swapping bellhousings and using your quad tranny. 1st gear will be totally useless if you do. There are V6 transmission out there, did you look on http://www.car-part.com? Check both 92 and 93 years, you can use either or, but they will not crossreference because one is internal slave and one is external.
Thanks for the info, yeah I looked at car-part.com closest one is 640 miles away...they dont want to ship!
1of 896 Quad4 Z26's....now 3500 5spd swapped!-sold
'14 C7 Z51 7SPD
- SummitBalt08
- Registered User
- Posts: 1062
- Joined: Fri Jun 04, 2010 11:10 am
- Location: Sidney, Ohio
- Contact:
Re: WTB 92+ V6 5spd Tranny
Call this number..
Willie Mote Used Auto Parts, Inc.
800-225-4963 / 574-826-4146
Ask them for a 93 Beretta V6 manual transmission. They will ship. They are in Indiana.
Willie Mote Used Auto Parts, Inc.
800-225-4963 / 574-826-4146
Ask them for a 93 Beretta V6 manual transmission. They will ship. They are in Indiana.
-Shawn
Been on the Beretta Forums since '04
94 Black Quad 5 spd Z26 ->3500 6 spd ZR6
Bfests '11,'12,'14
July 2012 Bnet Calendar
Been on the Beretta Forums since '04
94 Black Quad 5 spd Z26 ->3500 6 spd ZR6
Bfests '11,'12,'14
July 2012 Bnet Calendar
Re: WTB 92+ V6 5spd Tranny
That reminds me, there is a 92 or 93 GT beretta in the yard up in the Ontario area north of me, with black interior, 3.1 MPFI mated to a 5 speed. May see if anyone wants parts, but that place won't be overly cheap. Has a Z04 spoiler, clear lower filler, etc.
94' Z26 Project - 95' Base Project - Custom LED Light Conversions!
Chosen Proposal Submission & Committee Member for Beretta Fest 2012 in Traverse City Michigan
Chosen Proposal Submission & Committee Member for Beretta Fest 2012 in Traverse City Michigan
Re: WTB 92+ V6 5spd Tranny
Currently have a deal with Barry. Thanks everyone for the help.
1of 896 Quad4 Z26's....now 3500 5spd swapped!-sold
'14 C7 Z51 7SPD
- SummitBalt08
- Registered User
- Posts: 1062
- Joined: Fri Jun 04, 2010 11:10 am
- Location: Sidney, Ohio
- Contact:
Re: WTB 92+ V6 5spd Tranny
Don't forget about the custom motor mount you need
Sent from my EVO LTE using Tapatalk 2
Sent from my EVO LTE using Tapatalk 2
-Shawn
Been on the Beretta Forums since '04
94 Black Quad 5 spd Z26 ->3500 6 spd ZR6
Bfests '11,'12,'14
July 2012 Bnet Calendar
Been on the Beretta Forums since '04
94 Black Quad 5 spd Z26 ->3500 6 spd ZR6
Bfests '11,'12,'14
July 2012 Bnet Calendar
- SummitBalt08
- Registered User
- Posts: 1062
- Joined: Fri Jun 04, 2010 11:10 am
- Location: Sidney, Ohio
- Contact:
Re: WTB 92+ V6 5spd Tranny
Btw: here's what a 92 Beretta V6 5 speed trans, shift cables, shifter assembly and external slave cylinder look like hehe
Sent from my EVO LTE using Tapatalk 2
Sent from my EVO LTE using Tapatalk 2
-Shawn
Been on the Beretta Forums since '04
94 Black Quad 5 spd Z26 ->3500 6 spd ZR6
Bfests '11,'12,'14
July 2012 Bnet Calendar
Been on the Beretta Forums since '04
94 Black Quad 5 spd Z26 ->3500 6 spd ZR6
Bfests '11,'12,'14
July 2012 Bnet Calendar
Re: WTB 92+ V6 5spd Tranny
Dang it! That's what I need!!!
Btw, what engine mount are you talking about?
Btw, what engine mount are you talking about?
1of 896 Quad4 Z26's....now 3500 5spd swapped!-sold
'14 C7 Z51 7SPD
Re: WTB 92+ V6 5spd Tranny
quad 4 > v6 any day hands down. although, i tried to get my hands on a 5spd sunbird, put a 3400 in that and it would be a quick little fucker for sure.
1991 beretta GTZ- 2.3l w41 cams, ported 086 head with a 3 angle valve job, fidanza flywheel with exedy racing clutch, 3.94fdr from and scx, so much more..
- SummitBalt08
- Registered User
- Posts: 1062
- Joined: Fri Jun 04, 2010 11:10 am
- Location: Sidney, Ohio
- Contact:
Re: WTB 92+ V6 5spd Tranny
http://mrzperformance.vstore.ca/product ... cts_id/136Quad4Z26 wrote:Dang it! That's what I need!!!
Btw, what engine mount are you talking about?
-Shawn
Been on the Beretta Forums since '04
94 Black Quad 5 spd Z26 ->3500 6 spd ZR6
Bfests '11,'12,'14
July 2012 Bnet Calendar
Been on the Beretta Forums since '04
94 Black Quad 5 spd Z26 ->3500 6 spd ZR6
Bfests '11,'12,'14
July 2012 Bnet Calendar
- woody90gtz
- Registered User
- Posts: 4703
- Joined: Thu Jul 11, 2002 8:45 pm
- Location: Walton, NY
- Contact:
Re: WTB 92+ V6 5spd Tranny
More horsepower, more torque, more fun.speedy wrote:v6 > quad 4 any day hands down.
91 "SS" - WOT 3400/5spd - 13.29@101.6 - World's fastest N/A FWD Beretta
96 "T56" LS/6spd/8.8 RWD swap - 13.45@104.7 lol
GEARHEAD dezign youtube
96 "T56" LS/6spd/8.8 RWD swap - 13.45@104.7 lol
GEARHEAD dezign youtube