Does anybody have one of these

List any Item for a Beretta that you want to purchase
Post Reply
clayman612
Registered User
Posts: 23
Joined: Tue Aug 06, 2013 3:24 am
Location: North Central Kansas "Hee Haw"

Does anybody have one of these

Post by clayman612 »

94 Z26 3.1 Auto need motor mount pictured inside red circle on picture below Only thing is I need it by next Tuesday let me know if you have a excellent used or a nos item Thanks anbd have a great day
Attachments
Can anybody help me out I am willing to pay of course and have paypal live in North Central Ks zip 67432
Can anybody help me out I am willing to pay of course and have paypal live in North Central Ks zip 67432


I don't know what World War 3 will be fought with but I know that World War 4 will be fought with sticks and stones "Albert Einstein"
User avatar
ifixalot
Registered User
Posts: 668
Joined: Tue Dec 26, 2006 10:56 am
Location: Deerfield Illinois

Re: Does anybody have one of these

Post by ifixalot »

I saw your other post too. You can get one from Rock auto or Ebay.
Just make sure you get one for the V-6 engine.
That insert fits into the metal mount "cage". But as I recall mine didn't fit so well.
I had to drill out the holes for the bolts because they were a little off.
BTW, the aftermarket units transfer more vibration than the OEM.
But it's not bad. It may seem to you that your engine idles a little rougher but it's the mount
transferring more vibration.


User avatar
ifixalot
Registered User
Posts: 668
Joined: Tue Dec 26, 2006 10:56 am
Location: Deerfield Illinois

Re: Does anybody have one of these

Post by ifixalot »

Here is a youtube video of a 90 Beretta engine mount changeout.
At about 8-1/2 minutes in, he shows the rubber insert inside the cage.
It is similar to the 94 Beretta.
https://www.youtube.com/watch?v=zsTjQm4-Dsk
I would drill out the rings on the bottom instead of chiseling.


2.2H8TA
Registered User
Posts: 915
Joined: Mon Aug 31, 2009 3:59 am
Location: NE-PA
Contact:

Re: Does anybody have one of these

Post by 2.2H8TA »

When I bought my car, it also needed this. It was completly trashed, so I had to buy the complete mount, not just the insert. I had trouble finding it too, as it seems to be a 94 only part. I had to get it through my local gm dealer, and it costed almost $200. I tried the duralast brand one and it didn't work. Where are you located?


1994 AQUA ZED
User avatar
ifixalot
Registered User
Posts: 668
Joined: Tue Dec 26, 2006 10:56 am
Location: Deerfield Illinois

Re: Does anybody have one of these

Post by ifixalot »

his location is in the comment of his picture
North Central Ks zip 67432
Ebay shows the part number is the same as my 96.


User avatar
ladz24/z26
Registered User
Posts: 51
Joined: Wed Jul 04, 2012 1:33 pm
Location: san antonio,TX

Re: Does anybody have one of these

Post by ladz24/z26 »

it is a 94-96 part yes the aftermarket ones need to bore out the mounting holes. Any Autoparts chain should have it


if aint broken upgrade it
Post Reply