Not your average Z26... a resurrection
Re: Not your average Z26... a resurrection
Nice!! Making the front suspension the way we all wish the factory would have. Excited to see it come together (in other words, jealous I can't do it to mine) lol
-
- Global Moderator
- Posts: 1991
- Joined: Sun Nov 03, 2002 4:10 pm
- Location: Concord, NC
- Contact:
Re: Not your average Z26... a resurrection
Finished modifying the struts; still need to weld the base of the coil over sleeve support (aka the washer) and weld the adapter sleeves to the top of the strut tube, and paint them, but here they are assembled.
Geoff
95 Z26 Turbo 3400 5spd - R&D Project
Beretta Preservation Society - Director of Acquisitions
95 Z26 Turbo 3400 5spd - R&D Project
Beretta Preservation Society - Director of Acquisitions
- woody90gtz
- Registered User
- Posts: 4703
- Joined: Thu Jul 11, 2002 8:45 pm
- Location: Walton, NY
- Contact:
Re: Not your average Z26... a resurrection
Pretty sweet. You thinking adjustable heims for the sway bar links? I think we talked about this before. But the 5/8 ones I built were too big and needed misalignment spacers. I bought stock links and they are very light duty by comparison, so you can go smaller than 5/8 off that's your plan.
91 "SS" - WOT 3400/5spd - 13.29@101.6 - World's fastest N/A FWD Beretta
96 "T56" LS/6spd/8.8 RWD swap - 13.45@104.7 lol
GEARHEAD dezign youtube
96 "T56" LS/6spd/8.8 RWD swap - 13.45@104.7 lol
GEARHEAD dezign youtube
-
- Global Moderator
- Posts: 1991
- Joined: Sun Nov 03, 2002 4:10 pm
- Location: Concord, NC
- Contact:
Re: Not your average Z26... a resurrection
I may later on, but for time constraints and to get this together for BFest this year, I’ll use off the shelf parts I already have. The Moog units are beefier than factory, and since I already have them, that’s what will go on.
Geoff
95 Z26 Turbo 3400 5spd - R&D Project
Beretta Preservation Society - Director of Acquisitions
95 Z26 Turbo 3400 5spd - R&D Project
Beretta Preservation Society - Director of Acquisitions
-
- Registered User
- Posts: 677
- Joined: Thu Apr 26, 2001 3:11 pm
- Location: Charlotte, NC
Re: Not your average Z26... a resurrection
Geoff - you have a line on a local powdercoater?
2005 Chevrolet Corvette Z51
2005 GMC Sierra 2500HD
2014 Chevy SS
2005 GMC Sierra 2500HD
2014 Chevy SS
-
- Global Moderator
- Posts: 1991
- Joined: Sun Nov 03, 2002 4:10 pm
- Location: Concord, NC
- Contact:
Re: Not your average Z26... a resurrection
I have one in Locust area - not over on this side of Charlotte - yet.
Geoff
95 Z26 Turbo 3400 5spd - R&D Project
Beretta Preservation Society - Director of Acquisitions
95 Z26 Turbo 3400 5spd - R&D Project
Beretta Preservation Society - Director of Acquisitions
-
- Global Moderator
- Posts: 1991
- Joined: Sun Nov 03, 2002 4:10 pm
- Location: Concord, NC
- Contact:
Re: Not your average Z26... a resurrection
Welded the insert spacers and the coil sleeve “shelf” in place, ground down the welds (for clearance of the sleeve), and painted the housings.
Also removed the front exhaust manifold off the Z26 to place on the Alero I bought (the Alero had a one off set of Doug’s Headers, and a built 93-94 NVG550 trans with a Torsen LSD that is going into the Z26 - factory parts going onto the Alero and I’m selling it).
Tomorrow will be the final time the struts are assembled before they go into the Z, and I might start fitting the turbo headers onto the Z.
Also removed the front exhaust manifold off the Z26 to place on the Alero I bought (the Alero had a one off set of Doug’s Headers, and a built 93-94 NVG550 trans with a Torsen LSD that is going into the Z26 - factory parts going onto the Alero and I’m selling it).
Tomorrow will be the final time the struts are assembled before they go into the Z, and I might start fitting the turbo headers onto the Z.
Geoff
95 Z26 Turbo 3400 5spd - R&D Project
Beretta Preservation Society - Director of Acquisitions
95 Z26 Turbo 3400 5spd - R&D Project
Beretta Preservation Society - Director of Acquisitions
Re: Not your average Z26... a resurrection
Awesome.
It looks like you found off-the-shelf parts for everything except the top plate that bolts in to the strut tower?
Is the threaded sleeve just a slip fit over the strut housing tube, or is it secured somehow?
Just curious, it's a sweet setup.
It looks like you found off-the-shelf parts for everything except the top plate that bolts in to the strut tower?
Is the threaded sleeve just a slip fit over the strut housing tube, or is it secured somehow?
Just curious, it's a sweet setup.
-
- Global Moderator
- Posts: 1991
- Joined: Sun Nov 03, 2002 4:10 pm
- Location: Concord, NC
- Contact:
Re: Not your average Z26... a resurrection
I'll get P/N's and links to everything I ordered - but you are right, everything was available minus the camber plate, which was made by a fellow member a few years ago.EPfiffner wrote:Awesome.
It looks like you found off-the-shelf parts for everything except the top plate that bolts in to the strut tower?
Is the threaded sleeve just a slip fit over the strut housing tube, or is it secured somehow?
Just curious, it's a sweet setup.
It's a slip fit - but since I didn't measure my struts before ordering the sleeves, I had to grind down the entire area where the sleeves would be to fit them properly. So it's a super tight fit. The sleeves will rest on the washer "perch" and won't go anywhere due to them sitting on the shelf under compression from the spring. I could put a set screw in it to secure it but there isn't much of a need for that.
Never!themixer wrote:are those junky gold wheels for sale?
Geoff
95 Z26 Turbo 3400 5spd - R&D Project
Beretta Preservation Society - Director of Acquisitions
95 Z26 Turbo 3400 5spd - R&D Project
Beretta Preservation Society - Director of Acquisitions
-
- Global Moderator
- Posts: 1991
- Joined: Sun Nov 03, 2002 4:10 pm
- Location: Concord, NC
- Contact:
Re: Not your average Z26... a resurrection
Didn’t get as much done on the Z as I wanted to, but I got work done on the Alero that I need the trans out of, so I guess it’s a step in the right direction.
I did get the coil overs fully assembled and torqued down, and laid out a few of the parts I hope to get onto the car next weekend...
I did get the coil overs fully assembled and torqued down, and laid out a few of the parts I hope to get onto the car next weekend...
Geoff
95 Z26 Turbo 3400 5spd - R&D Project
Beretta Preservation Society - Director of Acquisitions
95 Z26 Turbo 3400 5spd - R&D Project
Beretta Preservation Society - Director of Acquisitions
-
- Registered User
- Posts: 677
- Joined: Thu Apr 26, 2001 3:11 pm
- Location: Charlotte, NC
Re: Not your average Z26... a resurrection
Turbo goes wooo woo!
2005 Chevrolet Corvette Z51
2005 GMC Sierra 2500HD
2014 Chevy SS
2005 GMC Sierra 2500HD
2014 Chevy SS
-
- Registered User
- Posts: 677
- Joined: Thu Apr 26, 2001 3:11 pm
- Location: Charlotte, NC
Re: Not your average Z26... a resurrection
If you want your headers coated - there is a placed in Denver that does it.
Callico coatings - a few guys in the G8/SS group have been taking their headers there.
Callico coatings - a few guys in the G8/SS group have been taking their headers there.
2005 Chevrolet Corvette Z51
2005 GMC Sierra 2500HD
2014 Chevy SS
2005 GMC Sierra 2500HD
2014 Chevy SS
-
- Global Moderator
- Posts: 1991
- Joined: Sun Nov 03, 2002 4:10 pm
- Location: Concord, NC
- Contact:
Re: Not your average Z26... a resurrection
Thanks for the tip; I’ll probably use them next time around as right now I’m just putting everything together, if it needs paint, I’m using what I have in the garage instead of powdercoating/ceramic coating to save time and costs.
I’ll get things done the way I want when I build the forged block.
I’ll get things done the way I want when I build the forged block.
Geoff
95 Z26 Turbo 3400 5spd - R&D Project
Beretta Preservation Society - Director of Acquisitions
95 Z26 Turbo 3400 5spd - R&D Project
Beretta Preservation Society - Director of Acquisitions
- themixer
- Registered User
- Posts: 1569
- Joined: Fri Aug 14, 2009 12:13 pm
- Location: Truro, Nova Scotia. Canada
Re: Not your average Z26... a resurrection
any chance you have changed your mind on the gold wheels?