Pics of my rides and all

Tell us about your Beretta and Post an Image
Post Reply
User avatar
weba
Registered User
Posts: 1096
Joined: Fri Oct 14, 2005 5:34 am
Location: Finland
Contact:

Pics of my rides and all

Post by weba »

I got little camera happy so here are some pics i took of my cars and all, will load a while, patience  


My 91 GTZ posing in add lights.. for the last time of this cars life.


Another angle, this car is out of roads in few weeks.. for good maybe


First love and new daily side by side


My fathers Volvo 940 2.3 Turbo/ic on the background..


Here lays my 90 GTZ project.. waiting for parts to arrive.. and snow to melt.


where did the suspension go?


No wheels!


And because i love pics from this angle


It's wet.. and shiny


I fill up for $130. Also Beretta owner since 2004
User avatar
weba
Registered User
Posts: 1096
Joined: Fri Oct 14, 2005 5:34 am
Location: Finland
Contact:

Pics of my rides and all

Post by weba »


Yep..


Clean interior...


Same


Engine bay could be more clear


Aint clean on my 91 either


I fill up for $130. Also Beretta owner since 2004
User avatar
weba
Registered User
Posts: 1096
Joined: Fri Oct 14, 2005 5:34 am
Location: Finland
Contact:

Pics of my rides and all

Post by weba »


Some liquids to help the 2.2 feel like young again


I just bought these for super cheap.. bad buy, they dont lift the tires of the ground...


Basic stuff to 2.2.. i also did had to buy serpentine belt and new alt.. but i forgot!


Some stuff to project car laying around:
- New lower water hose
- New GM strut mounts
- New GM strut boots
- Clear sidemarkers
- Clear bumber lights
- AC delete pulley
- Doorpanel clips
- Used Z04 fogs, i replaced the glasses and reflectors with new ones after taking this pic
Superior thanks to Rodville for shipping me these!


More stuff laying around and waiting...
- New ball joints
- Inner tierod bushings
- Controlarm polys
- Wheel seals
- Outer tierod polys
- Quad4 boots
- Instrument bulbs..
Still needing loads of stuff...


More stuff to project car
- Addco rear swaybar with polys
- Lower strut bar
- Fe7 polys
- My 12.3" Brembos ready to put on, as soon my Bilsteins arrive from Mantapart
- Rear C4 caliber adapters, still no money to buy rest of the rear hardware ;)



I spare you from the rest of pics.. for now, huh?


I fill up for $130. Also Beretta owner since 2004
Obsessedw/Berettas
Registered User
Posts: 120
Joined: Sun Aug 21, 2005 6:15 pm
Location: St.Olaf, Minnesota

Pics of my rides and all

Post by Obsessedw/Berettas »

Sweet. Your new base looks to be absolutely mint!



"I believe in Christianity as I believe that the sun has risen: not only because I see it, but because by it I see everything else."
- C.S. Lewis
wicked-irocz
Registered User
Posts: 1035
Joined: Thu Feb 20, 2003 11:21 pm
Location: South Central MN

Pics of my rides and all

Post by wicked-irocz »

thats a lot of stuff to put on your gtz, definatly is gonna be a different car.  Quite hard to get that stuff in Finland I assume.


94 Beretta Z26 57,4xx miles
3100, auto, crank windows, power locks/trunk, A/C,
To many mods to list
-intercooler :shock:

Among beretta boards
1st Turbo 4t60-e
1st Turbo 3100
1st Turbo Z26
1st 94+ Turbo
User avatar
weba
Registered User
Posts: 1096
Joined: Fri Oct 14, 2005 5:34 am
Location: Finland
Contact:

Pics of my rides and all

Post by weba »

(wicked-irocz @ Apr. 09 2006,13:07)Q
U
O
T
Ethats a lot of stuff to put on your gtz, definatly is gonna be a different car.  Quite hard to get that stuff in Finland I assume.
It's hard. Im trying to get my suspension and brake setup done this year if i have money and time..

Next will be the transmission and the motor.

Suspension project:

Bilsteins              [Coming]
Polys: controlarm        [Got]
Polys: FE7            [Got]
Polys: for inner tie rod       [Got]
Polys: Outer tie rod boots   [Got]
Billet Upper strut tower brace [Coming]
Lower strut tower brace   [Got]
Rear Strut Tower Brace    [-?-]
Addco rear swaybar    [Got]
Eibachs             [Got]
New Ball Joints          [Got]
New Strut Mounts      [Got]
New Strut Boots       [Cot]
New Hub Seals       [Got]


Brake setup:

Front
Brembo front 12.3" rotors   [Got]
Brembo front calibers [Got]
Mounts for front calibers [Done]
Hoses

Rear
C4 rotors
C4 pads
C4 Calibers
C4 Caliber mounts
Mounts to rear axle    [Got]
Some custom work


And then a lots of other work like interior swap etc...





I fill up for $130. Also Beretta owner since 2004
User avatar
weba
Registered User
Posts: 1096
Joined: Fri Oct 14, 2005 5:34 am
Location: Finland
Contact:

Pics of my rides and all

Post by weba »

First the AC removal pics:


First we take the bumber off, then the AC radiator...


And after couple hours of work, the rest off the AC stuff is off.. no, the cat wasn't on the car.
All this stuff in the pic only weights 13Kg.. so i dont think AC del is going to be noticeable weight reduction for anyone.


Ah, so much empy space. Before i put the radiator and front parts back, i'l do the custom CAI, Big3, and battery relocation to trunk.. and few other mods i'l show you later.


Ultimate tool for AC tube removal, makes the job 1000 times faster  :twisted:


stuff to my project car, heavy wires for big3 and battery relocation to trunk, bendable 60mm aluminium pipe and silicon clamps for my new CAI.
And some misc electrical parts to help.
The 60mm pipe itself was very cheap (only 28€), it's kinda small but should do just right because the T/B aint any bigger than that!


These 13" babys will definetly keep the radiator and engine cool, 2700CFM of pure air flow  :shock:  i will put a switch to console where i can operate these buddies.
I'l leave the stock fan computer operated.. so i have total of 3 fans on my car.


And then some night pics of the base





Comments?


I fill up for $130. Also Beretta owner since 2004
User avatar
HateMyAuto
Registered User
Posts: 221
Joined: Thu Feb 03, 2005 9:56 pm
Location: Tallahassee Fl

Pics of my rides and all

Post by HateMyAuto »

Those Brembo calipers you have, are they bolt on OEM upgrades, or was there modification needed?


'96 Z26 Now with 10% more displacement
'94 Camaro
User avatar
weba
Registered User
Posts: 1096
Joined: Fri Oct 14, 2005 5:34 am
Location: Finland
Contact:

Pics of my rides and all

Post by weba »

(HateMyAuto @ Apr. 30 2006,13:26)Q
U
O
T
EThose Brembo calipers you have, are they bolt on OEM upgrades, or was there modification needed?
Only small modification needed, but caliber adapters are needed to mount them, i had mine made in local mashinery.



Project pics here


I fill up for $130. Also Beretta owner since 2004
98beretta kid
Registered User
Posts: 46
Joined: Sat Oct 13, 2001 2:59 pm
Location: Bay City, Michigan

Pics of my rides and all

Post by 98beretta kid »

Dang, and I thought owning 2 Berettas was enough.   Here you are with 3. Which one are those rims with the polished lip going on? Those are hot looking.


-Bryan

1989 Beretta GT (Money pit #1)
1996 GMC Sonoma (Money pit #2)
1993 GTZ ( Couldn't ask for a better Car)

The 3 reasons why I'm broke
User avatar
HateMyAuto
Registered User
Posts: 221
Joined: Thu Feb 03, 2005 9:56 pm
Location: Tallahassee Fl

Pics of my rides and all

Post by HateMyAuto »

(weba @ Apr. 30 2006,12:25)Q
U
O
T
EOnly small modification needed, but caliber adapters are needed to mount them, i had mine made in local mashinery.
Not bad. I take it then the rotors are just Brembo cross drilled, stock size. Can we see a pic of the adapters?

EDIT: Oh, and by the by, what model number/type is the caliper/rotor you are using?

EDITx2: I just noticed the project pics. Forget about the stock rotor size and caliper pics...But what size rims are those, all I can tell from the pics is that they are 215/40s...





'96 Z26 Now with 10% more displacement
'94 Camaro
User avatar
weba
Registered User
Posts: 1096
Joined: Fri Oct 14, 2005 5:34 am
Location: Finland
Contact:

Pics of my rides and all

Post by weba »

The calibers are Brembo 4 piston ones, from VAG cars (VW, Audi, Seat, etc..)

The rotors are drilled Brembos, size 12.82" x 30mm from Subaru WRX STI 2003 (they have the 5x100 pattern stock)

Rims are 17 x 7" that i remember, offset required is 44mm.

Tires are Cooper Cobra ZHT, 215/45R17 rated for 270km/h!


And these brakes barely fit inside the rims, i would suggest using atleast 18" rims with this setup ÂÂÂ

For rear i'm building the C4 brakes, later when i have time and money again





I fill up for $130. Also Beretta owner since 2004
User avatar
HateMyAuto
Registered User
Posts: 221
Joined: Thu Feb 03, 2005 9:56 pm
Location: Tallahassee Fl

Pics of my rides and all

Post by HateMyAuto »

Wow, you have a real nice setup. They say the best compliment is immitation. I don't have nearly the kind of money right now for my car for stuff I'd like to do, so I'll just wish I had your setup.


'96 Z26 Now with 10% more displacement
'94 Camaro
HeartBeatKid
Registered User
Posts: 108
Joined: Wed May 23, 2001 12:07 am
Location: YouWish,CT
Contact:

Pics of my rides and all

Post by HeartBeatKid »

hey weba i need dimencions on that rear brake mounting bracket PLEASE!


Post Reply