1991 Beretta base / Browser
Re: 1991 Beretta base / Browser
Anyone have a clue, if somebody produced polyurethane rear axle bushings?
-
- Registered User
- Posts: 1255
- Joined: Sun Mar 12, 2006 12:11 am
- Location: Rochester New York
- Contact:
Re: 1991 Beretta base / Browser
no their is just 3 types of replacements their was talks of delrin ones being made but they fell through if im not mistaken
Re: 1991 Beretta base / Browser
Most likely my car is the only Beretta on the planet with Delrin bushings still
Re: 1991 Beretta base / Browser
We had one guy in Estonia, who did custom polyurethane bushings, but now he has moved somewhere else.
Measured the rear axle and will send energy e-mail that do they have any universal ones on that size.
Measured the rear axle and will send energy e-mail that do they have any universal ones on that size.
-
- Registered User
- Posts: 1255
- Joined: Sun Mar 12, 2006 12:11 am
- Location: Rochester New York
- Contact:
Re: 1991 Beretta base / Browser
if they do please post up and i also hit erichz26 old thread to see what he says bout making more of the bushings that weba has
Re: 1991 Beretta base / Browser
I think I found a poly bushings for rear axle. These are universal bushes from Energy and in first it looks like it suits with the dimensions of rear axle tubing.
http://www.energysuspensionparts.com/pr ... rod=9.9488#
Dimensions can be found here
http://www.energysuspensionparts.com/En ... shings.asp
I measured the rear axle tubing for inner diameter - 1.73" and for length 2.55". Looks like we have a winner. Only I have not measured the bolt diameter. Will do this in evening.
http://www.energysuspensionparts.com/pr ... rod=9.9488#
Dimensions can be found here
http://www.energysuspensionparts.com/En ... shings.asp
I measured the rear axle tubing for inner diameter - 1.73" and for length 2.55". Looks like we have a winner. Only I have not measured the bolt diameter. Will do this in evening.
- 3X00-Modified
- Administrator
- Posts: 10912
- Joined: Thu Jul 05, 2007 9:18 am
- Location: Brooklyn CT
Re: 1991 Beretta base / Browser
If you take a look at the stock bushings, you can see they only have flange on other side, making that fit inside the mount in the frame may need some lathe time.
Re: 1991 Beretta base / Browser
Also, I measured the bolt yesterday. Stock is 12mm, but these bushes need 16mm.
Re: 1991 Beretta base / Browser
Just order a replacement one from rockauto, and take it to your machinist to multiply.
- Money pit Beretta
- Registered User
- Posts: 6411
- Joined: Thu Jul 26, 2007 11:36 am
- Location: Kansas
- Money pit Beretta
- Registered User
- Posts: 6411
- Joined: Thu Jul 26, 2007 11:36 am
- Location: Kansas
Re: 1991 Beretta base / Browser
Man you are lucky. Parts have to be hard to get there(take it easy).
keep'em flying!