rsm s/c fitting help asap
rsm s/c fitting help asap
Ok so the kit i bought didnt come with the oil feed fitting, ive been told that you are supposed to put a Tee fitting in where the oil pressure sending unit is. i have beed to alot of websites looking for this fitting but am still unable to find one or even piece one together, so i am here looking for help..
This is what i was told, my hose is a female -4an and my sensor is male 1/4-18npt
male -4an (for femal hose to connect to) <------> 1/4-18 female (for sensor to screw into)
^
|
v
1/4-18 male ( to screw into block)
can anyone piece a tee fitting together like this or find me one with part #'s?
much appreciated, thanx
This is what i was told, my hose is a female -4an and my sensor is male 1/4-18npt
male -4an (for femal hose to connect to) <------> 1/4-18 female (for sensor to screw into)
^
|
v
1/4-18 male ( to screw into block)
can anyone piece a tee fitting together like this or find me one with part #'s?
much appreciated, thanx
1 Of 1 Street Legal Centri S/c Beretta's In Existance
-
- Global Moderator
- Posts: 1991
- Joined: Sun Nov 03, 2002 4:10 pm
- Location: Concord, NC
- Contact:
Re: rsm s/c fitting help asap
Look online at Summit or Jegs. They carry all these types of fittings.
Geoff
95 Z26 Turbo 3400 5spd - R&D Project
Beretta Preservation Society - Director of Acquisitions
95 Z26 Turbo 3400 5spd - R&D Project
Beretta Preservation Society - Director of Acquisitions
Re: rsm s/c fitting help asap
tried piecing a kit together for a half hr but had to success, i have no idea how rsm did it..
1 Of 1 Street Legal Centri S/c Beretta's In Existance
- 3X00-Modified
- Administrator
- Posts: 10912
- Joined: Thu Jul 05, 2007 9:18 am
- Location: Brooklyn CT
Re: rsm s/c fitting help asap
Here you go:
you dont need the piece to go to the turbo inlet
your welcome.
you dont need the piece to go to the turbo inlet
your welcome.
Beretta 96 3500 - 14.981@ 93.32
65MM thorttle body, Crank trigger 97 venture ECM and Dhp powrTuner
65MM thorttle body, Crank trigger 97 venture ECM and Dhp powrTuner
- woody90gtz
- Registered User
- Posts: 4698
- Joined: Thu Jul 11, 2002 8:45 pm
- Location: Walton, NY
- Contact:
Re: rsm s/c fitting help asap
Here you go, all set.
http://www.summitracing.com/parts/NOS-16777NOS/
http://www.summitracing.com/parts/SUM-220447B/
It would be nice if they had a tee in the configuration you need, but they don't. One adapter gets the job done though, so that's not bad.
http://www.summitracing.com/parts/NOS-16777NOS/
http://www.summitracing.com/parts/SUM-220447B/
It would be nice if they had a tee in the configuration you need, but they don't. One adapter gets the job done though, so that's not bad.
91 "SS" - WOT 3400/5spd - 13.29@101.6 - World's fastest N/A FWD Beretta
96 "T56" LS/6spd/8.8 RWD swap - 13.45@104.7 lol
GEARHEAD dezign youtube
96 "T56" LS/6spd/8.8 RWD swap - 13.45@104.7 lol
GEARHEAD dezign youtube
Re: rsm s/c fitting help asap
actually woody i just bought that exact run tee from MSC direct yesterday and it was only $6, and ordered that same adapter as well, thanx guys
1 Of 1 Street Legal Centri S/c Beretta's In Existance