Computers

Guest · Post by **Guest** » Fri Dec 20, 2002 12:51 am

Would a 3.1 enigne work in a car with the 2.8 computer? As far as i know the only difference in the two is the bore&stroke and the intake plenum, some body correct me if i'm wrong

chevythunder · Post by **chevythunder** » Fri Dec 20, 2002 10:50 am

That is my set up right now 2.8 computer and 3.1 bored out and rebuilt and it works just fine .One thing I will mentions is I am still running the 2.8 heads and all the same sensors.

Chris88CL · Post by **Chris88CL** » Fri Dec 20, 2002 12:04 pm

Im running a 93 3.1L engine with my 2.8L wiring and computer and it works great.

Guest · Post by **Guest** » Sat Dec 21, 2002 12:20 am

Ok so if i get the 3.1, i can use all the same wiring and not have to change anything?

Guest · Post by **Guest** » Sat Dec 21, 2002 11:19 pm

yes. all that changed was the stroke. Bore is the same.

Chazzman · Post by **Chazzman** » Wed Dec 25, 2002 11:10 pm

Quote (chevythunder @ Dec. 19 2002,10:50)One thing I will mentions is I am still running the 2.8 heads and all the same sensors.
FYI, the 3.1L and 2.8L heads are all the same.

Guest · Post by **Guest** » Thu Dec 26, 2002 12:40 am

Quote (Chazzman @ Dec. 25 2002,10:10)Quote (chevythunder @ Dec. 19 2002,10:50)One thing I will mentions is I am still running the 2.8 heads and all the same sensors.
FYI, the 3.1L and 2.8L heads are all the same.
Yeah I sorta figured the heads were the same since it was the same block and all. Thanx For the info Fellas

Connect with your social network account