Carbon Cleaning

Post information about intake systems. Either purchased or custom made
Post Reply
Retta88GT
Registered User
Posts: 21
Joined: Tue Apr 01, 2008 10:27 pm
Location: Las Vegas
Contact:

Carbon Cleaning

Post by Retta88GT »

Okay, I got my plenum off, and it's definitely caked with carbon on the inside.  What's the best stuff to get that out of there? ...and what about the lower half?  Is there something I can spray in there to get rid of the crap in the lower half without fouling my plugs or messing something up?

Thanks!



It was only supposed to be a #3 decal on the back window....
User avatar
Z26-T
Registered User
Posts: 51
Joined: Fri Apr 04, 2008 12:25 am
Location: South Jordan Utah
Contact:

Carbon Cleaning

Post by Z26-T »

BG products (www.bgprod.com) make an intake system cleaner which you use to clean the intake with the engine running, basically just spray it in, but you'll probabbly have to take it into a shop that has the equipment.

Or just try the "how to seafoam your car" thread made by fastlane.

GM also makes a top engine cleaner which is aerosol.


95' Z26 Beretta- 3400, 282, exhaust. Lots of upgrades still in boxes...
79' Z28 Camaro- Not street legal- 12-1 compression, etc.
S. Comp. Dragster- DEI 350, 600 hp @ 5600, I take it to 7400.
fastlane02
Registered User
Posts: 315
Joined: Tue Nov 06, 2007 10:00 pm
Location: Warren, IN

Carbon Cleaning

Post by fastlane02 »

seafoam it and watch your car smoke for a couple minutes lol.

how many miles are on it?


CBC PERFORMANCE

use to be grace89SS
89gt 3.8scII to much to list.
87 iroc-z the old girl is getting a make over!
90 gtz bring her back to her glory days but even better!
02 TA moser 12 bolt,yank 4k stall, spohn everything, LPE heads,MS4 cam,fast90/90 ported, hooker lt sc.
68 firebird
Retta88GT
Registered User
Posts: 21
Joined: Tue Apr 01, 2008 10:27 pm
Location: Las Vegas
Contact:

Carbon Cleaning

Post by Retta88GT »

The plenum is off.  I want to clean it out before I put it back on.  I can use seafoam and wash it out?



It was only supposed to be a #3 decal on the back window....
User avatar
zach82
Registered User
Posts: 185
Joined: Mon Apr 30, 2001 12:01 pm
Location: Illinois
Contact:

Carbon Cleaning

Post by zach82 »

Castrol Super Clean works great, but you can't leave it on too long or it'll start pitting the aluminum.  I used it to clean up my 3100 intake when I had to replace the gasket, it came out looking like it was new after a couple of soak and rinses.


1994 Purple Pearl Base (RWD conversion project)
1973/77 Ford 3/4 ton 4X4 long bed
1987 Suzuki Samurai / heavily modded
My site  http://www.zcm82.net
User avatar
speedygtz
Registered User
Posts: 335
Joined: Wed Jun 28, 2006 11:09 pm
Location: lehighton

Carbon Cleaning

Post by speedygtz »

go to the auto store, pick up some 2+2 carb and choke cleaner, that stuff is the **** at cleaning cunked up carbs and intakes, works good, allways did for me, its basicly starting fluid to, or you could use a good brand of starting fluid, that should also work. but if you ask me, take some 2+2 and spray it around in there, you'd be amazed at the difference it makes.


the z26 is on the road!
Retta88GT
Registered User
Posts: 21
Joined: Tue Apr 01, 2008 10:27 pm
Location: Las Vegas
Contact:

Carbon Cleaning

Post by Retta88GT »

Cool..... Thanks guys!!    



It was only supposed to be a #3 decal on the back window....
JeffD
Registered User
Posts: 473
Joined: Tue Feb 07, 2006 9:44 pm
Location: new york

Carbon Cleaning

Post by JeffD »

GM top engine cleaner works good too.


1988 Beretta GT 5 speed - 1st car... Gone to the crusher. :(
1989 Beretta GT Z-51
1994 Beretta Z26 getting FE7+Z51 goodies
1987 Pontiac Bonneville LG3+4T65-E
1987 Chevrolet Celebrity Wagon L36+4T65-E
1998 Chevrolet C1500 5.7L L31+ built 4L60-E
Post Reply