Styluss Automotive Warm & Cold Air Intakes

Post information about intake systems. Either purchased or custom made
User avatar
Styluss
Global Moderator
Posts: 2009
Joined: Tue Jan 24, 2006 6:48 pm
Location: Lakewood, Colorado

Re: Styluss Automotive Warm & Cold Air Intakes

Post by Styluss »

I would agree with 3X00. Just keep your stock parts for inspection time. I have to put my EGR valve back on before I go in for my emissions tests.


1989 GTU - The Nice Car
1989 GTU Mock - The Neglected Car
1989 Base Model - The Rally Car
User avatar
felixGTU
Registered User
Posts: 266
Joined: Thu Oct 28, 2010 8:08 pm
Location: Fresno, California

Re: Styluss Automotive Warm & Cold Air Intakes

Post by felixGTU »

I was planning on buying one in a later time but I just wondering about the smog. I'll just do what you guys recommend and kept the original equipment just for the inspection. Thanks guys.


Image

Chevrolet Beretta GTU/GT
User avatar
DanteGTZ
Registered User
Posts: 768
Joined: Sun Dec 16, 2012 4:38 pm

Re: Styluss Automotive Warm & Cold Air Intakes

Post by DanteGTZ »

I'd definitely be interesting in an intake for the Quad if it ever gets made... For years I ran with just a cone filter on the end of my factory airbox-to-TB hose. I used a soup can with both ends cut off as a "coupler"... :) Worked well for many years but there is definitely room for improvement.


1993 Quasar Quad4 GTZ - Project WTF

Previous Berettas: 90 GT, 93 Quasar GTZ, 93 Garnet GTZ, 93 Aqua GT
2.2H8TA
Registered User
Posts: 915
Joined: Mon Aug 31, 2009 3:59 am
Location: NE-PA
Contact:

Re: Styluss Automotive Warm & Cold Air Intakes

Post by 2.2H8TA »

I had a short ram intake put on my 94 3100 quickly when the hybrid ghetto stock rubber hose, tape, and spectre filter setup failed. (I bought the car like that). When this was done, The crank case return line was present, but not hooked up to anything really. The new intake has the iat hooked up, but not the crank case return line. Is this ok? Will I experience any problems without it? Also my K&N filter is huge, what is the PN for the smaller one that is available? (The intake pictured below was not purchased from styluss) It runs good with this setup, but I'm just wonderin'.
Attachments
IMG_20140419_141209.jpg


1994 AQUA ZED
User avatar
Money pit Beretta
Registered User
Posts: 6411
Joined: Thu Jul 26, 2007 11:36 am
Location: Kansas

Re: Styluss Automotive Warm & Cold Air Intakes

Post by Money pit Beretta »

This should be moved.
Really you need to get a Styluss intake. Ok......what you can do is to move the battery over some. Rotate the intake tube some and then you will gain space.
As for the PCV tube: Styluss makes a hole in the connecter with a rubber grommet. Looks like you don't have room for that. The tube is the fresh air intake and that air should be filtered. That is why it's connected to the engines air intake tube.


keep'em flying!
User avatar
Styluss
Global Moderator
Posts: 2009
Joined: Tue Jan 24, 2006 6:48 pm
Location: Lakewood, Colorado

Re: Styluss Automotive Warm & Cold Air Intakes

Post by Styluss »

People say you're fine without it and people say that you do need it, the crank case return line. I ran my car without it for a while without for a while and had no issues. I can easily sell you just the rubber coupler with a grommet in it so that you can use your current setup and have the return line. As for the filter part number I can dig that up too, but if this one fits just fine, why not use it? Larger filter = more air.


1989 GTU - The Nice Car
1989 GTU Mock - The Neglected Car
1989 Base Model - The Rally Car
User avatar
neech
Registered User
Posts: 56
Joined: Wed Oct 29, 2014 6:17 pm
Location: Thunder Bay Ontario

Re: Styluss Automotive Warm & Cold Air Intakes

Post by neech »

This may be a stupid question but on a warm air intake for a 3.1 what would I do with the mass airflow sensor that's currently in the air filter box?...thanks ..Ben


93 retta gt quasar
User avatar
Styluss
Global Moderator
Posts: 2009
Joined: Tue Jan 24, 2006 6:48 pm
Location: Lakewood, Colorado

Re: Styluss Automotive Warm & Cold Air Intakes

Post by Styluss »

IN the filter box? Are you sure you're not referring to the IAT? Intake Air Temp sensor.


1989 GTU - The Nice Car
1989 GTU Mock - The Neglected Car
1989 Base Model - The Rally Car
User avatar
neech
Registered User
Posts: 56
Joined: Wed Oct 29, 2014 6:17 pm
Location: Thunder Bay Ontario

Re: Styluss Automotive Warm & Cold Air Intakes

Post by neech »

Your right it's the iat ...my bad .. And there's a whole on your intake for it I assume?...or would I just tape it off?


93 retta gt quasar
User avatar
Styluss
Global Moderator
Posts: 2009
Joined: Tue Jan 24, 2006 6:48 pm
Location: Lakewood, Colorado

Re: Styluss Automotive Warm & Cold Air Intakes

Post by Styluss »

I can make them with or without the holes as requested.


1989 GTU - The Nice Car
1989 GTU Mock - The Neglected Car
1989 Base Model - The Rally Car
CorvetteBeretta
Registered User
Posts: 423
Joined: Thu Mar 06, 2014 10:28 am
Location: New West B.C. Canada

Re: Styluss Automotive Warm & Cold Air Intakes

Post by CorvetteBeretta »

On the 88 2.8 will the CAI work with BMW headlights (projectors) installed.


Image
User avatar
Styluss
Global Moderator
Posts: 2009
Joined: Tue Jan 24, 2006 6:48 pm
Location: Lakewood, Colorado

Re: Styluss Automotive Warm & Cold Air Intakes

Post by Styluss »

Uh, I assume so. I had BMW lights in my car at one point with the intake as well but they were not projectors. You could post a pic of that area and I'm sure I can confirm.


1989 GTU - The Nice Car
1989 GTU Mock - The Neglected Car
1989 Base Model - The Rally Car
CorvetteBeretta
Registered User
Posts: 423
Joined: Thu Mar 06, 2014 10:28 am
Location: New West B.C. Canada

Re: Styluss Automotive Warm & Cold Air Intakes

Post by CorvetteBeretta »

It looks real tight, ill get u a pic


Image
Oki_Hero
Registered User
Posts: 95
Joined: Mon Jun 06, 2016 10:20 pm
Location: Ettrick,Va

Re: Styluss Automotive Warm & Cold Air Intakes

Post by Oki_Hero »

Are these still available ?


96 Corsica 2.2 3 speed auto (awaiting building)
User avatar
Styluss
Global Moderator
Posts: 2009
Joined: Tue Jan 24, 2006 6:48 pm
Location: Lakewood, Colorado

Re: Styluss Automotive Warm & Cold Air Intakes

Post by Styluss »

I believe I can still obtain the piping necessary to make these.


1989 GTU - The Nice Car
1989 GTU Mock - The Neglected Car
1989 Base Model - The Rally Car
Post Reply