Page 1 of 2

Custom downpipes with corrrect flange for 3400 swap on Z26

Posted: Wed Oct 09, 2013 9:05 am
by timgerman
Is there anyone making and selling custom downpipes with correct flange for a 3400 swap on a Z26?

Please PM me.



Thanks,
tim

Re: Custom downpipes with corrrect flange for 3400 swap on Z

Posted: Wed Oct 09, 2013 10:59 am
by 3X00-Modified
Go get a Grand Am downpipe from the JY and cut the flange off it then have a muffler shop bend a pipe to clear the firewall. Problem solved.

Re: Custom downpipes with corrrect flange for 3400 swap on Z

Posted: Wed Oct 09, 2013 1:12 pm
by Quad4Z26
My local muffler shop had a grand am flange. I drove my car open manifolds to the muffler shop (about 5mins from my house) $65 later they made a custom 2.5" downpipe. No problems at all.

Ask around at your local muffler shops, you might get lucky.

Re: Custom downpipes with corrrect flange for 3400 swap on Z

Posted: Wed Oct 09, 2013 4:47 pm
by woody90gtz
My local muffler place bent one for me as well. I supplied the flange though, certainly would have been easier if they had one.

Re: Custom downpipes with corrrect flange for 3400 swap on Z

Posted: Wed Oct 09, 2013 9:53 pm
by Money pit Beretta
What the hell happened to Dusty?

Re: Custom downpipes with corrrect flange for 3400 swap on Z

Posted: Thu Oct 10, 2013 3:47 pm
by wicked-irocz
Still around, just not looking to pull a DP off and make a fixture unless I get a few orders together. If someone that wanted one lived close, I would use their car as a mock up so I didn't have to pull Kelly's.

Re: Custom downpipes with corrrect flange for 3400 swap on Z

Posted: Thu Oct 10, 2013 8:24 pm
by Money pit Beretta
Glad to hear that your still around! So do you need a down pipe? I may be able to get one this winter and a flange or two. I could still use a down pipe for a 3100 if there is ever an order list for those.

Re: Custom downpipes with corrrect flange for 3400 swap on Z

Posted: Sat Oct 12, 2013 8:49 am
by timgerman
on a side note: I could use 2 of these (for each of my Z26's).

Re: Custom downpipes with corrrect flange for 3400 swap on Z

Posted: Wed Oct 30, 2013 1:19 pm
by wicked-irocz
3100 DP's are all fixtured. All I need is a flange. I usually keep an eye out for them at the JY but I'm currently out. I will likely be going to the JY in 2 weeks and I will look again. Is anyone in the Twin Cities area that needs a DP for a 3400?

Re: Custom downpipes with corrrect flange for 3400 swap on Z

Posted: Thu Oct 31, 2013 7:26 am
by Money pit Beretta
Just checking, always like to help out if I can. After all you are the only one here making these.

Re: Custom downpipes with corrrect flange for 3400 swap on Z

Posted: Thu Oct 31, 2013 7:50 am
by 3X00-Modified
I should have made a jig from mine before sending it to shawn but I didn't... whoops. I don't have bending tools at my disposal though so I know Dusty's would come out better.

Re: Custom downpipes with corrrect flange for 3400 swap on Z

Posted: Mon Dec 02, 2013 8:36 pm
by Godlike
I could chop mine off the Z26 and get it to you some day Dusty. Just not sure when that would be as its my beater with a heater. Ive already taken photos of it installed to show firewall and sway bar distances.

Posted: Tue Dec 03, 2013 1:00 am
by SummitBalt08
I have Jons and haven't installed it yet due to the delays Tyler did.. if anybody wants to pay the shipping I can ship it for someone to make a jig..

Sent from my EVO LTE using Tapatalk 2

Re: Custom downpipes with corrrect flange for 3400 swap on Z

Posted: Wed Dec 04, 2013 8:39 am
by timgerman
i still need 2 of these made... keep me posted.

Posted: Wed Dec 04, 2013 9:39 am
by 89redtta
I am also in need of one

Sent from my SCH-I535 using Tapatalk