W41 Memcal part numbers?
W41 Memcal part numbers?
Anyone have the part numbers for the 92-93 Achieva SCX W41 memcals?
1993 Quasar Quad4 GTZ - Project WTF
Previous Berettas: 90 GT, 93 Quasar GTZ, 93 Garnet GTZ, 93 Aqua GT
Previous Berettas: 90 GT, 93 Quasar GTZ, 93 Garnet GTZ, 93 Aqua GT
-
- Registered User
- Posts: 98
- Joined: Tue Nov 27, 2012 7:14 pm
Re: W41 Memcal part numbers?
FWIW:
ASDH = 91 cutlass calais W41 (fed emissions), p/n of 16151382
ASDJ = 91 cutlass calais W41 (cal emissions), p/n of 16151387
AXRM = 91 cutlass calais W41 (??? emissions), p/n of 16163680
AXPR = 92 achieva W41 (fed emissions), p/n of 16167093
AXPS = 92 achieva W41 (cal emissions), p/n of 16167097
BAKS = 92 achieva W41 (??? emissions), p/n of 16176293
BAKT = 92 achieva W41 (??? emissions), p/n of 16176297
BCZT = 93 achieva W41 (fed emissions), p/n of 16184476
BDBT = 93 achieva W41 (cal emissions), p/n of 16184736
BDMP = 93 achieva W41 (??? emissions), p/n of 16189652
BDMR = 93 achieva W41 (??? emissions), p/n of 16189658
those are all the W41 calibrations i can find.
ASDH = 91 cutlass calais W41 (fed emissions), p/n of 16151382
ASDJ = 91 cutlass calais W41 (cal emissions), p/n of 16151387
AXRM = 91 cutlass calais W41 (??? emissions), p/n of 16163680
AXPR = 92 achieva W41 (fed emissions), p/n of 16167093
AXPS = 92 achieva W41 (cal emissions), p/n of 16167097
BAKS = 92 achieva W41 (??? emissions), p/n of 16176293
BAKT = 92 achieva W41 (??? emissions), p/n of 16176297
BCZT = 93 achieva W41 (fed emissions), p/n of 16184476
BDBT = 93 achieva W41 (cal emissions), p/n of 16184736
BDMP = 93 achieva W41 (??? emissions), p/n of 16189652
BDMR = 93 achieva W41 (??? emissions), p/n of 16189658
those are all the W41 calibrations i can find.
- Travelor
- Global Moderator
- Posts: 508
- Joined: Fri Jan 25, 2008 10:15 pm
- Location: Neenah, WI
- Contact:
Re: W41 Memcal part numbers?
I have an AXRM chip, swapped it for a 93 scx chip awhile back. Need to have Jeff reprogram it to delete whatever light its looking for...
1988 GTU
1990 GTZ
Beretta Preservation Society Chairman
"Have you painted your car in a parking lot today?"
1990 GTZ
Beretta Preservation Society Chairman
"Have you painted your car in a parking lot today?"
Re: W41 Memcal part numbers?
I had a 93 SCX chip in my 93 GTZ w/W41 way back when. The only side effect was my shift light went away, which I liked!
I'm curious if a 1992 W41 chip could be run in a 1993 ECM as well? It may not be a big deal, but am curious because I'd like to get the 5hp back that was lost in 1993 (obvious head and exhaust manifold change is also needed).
I'm curious if a 1992 W41 chip could be run in a 1993 ECM as well? It may not be a big deal, but am curious because I'd like to get the 5hp back that was lost in 1993 (obvious head and exhaust manifold change is also needed).
1993 Quasar Quad4 GTZ - Project WTF
Previous Berettas: 90 GT, 93 Quasar GTZ, 93 Garnet GTZ, 93 Aqua GT
Previous Berettas: 90 GT, 93 Quasar GTZ, 93 Garnet GTZ, 93 Aqua GT
- Asylum
- Registered User
- Posts: 3050
- Joined: Wed Mar 31, 2004 9:36 am
- Location: Hamilton, Ontario, Canada
- Contact:
Re: W41 Memcal part numbers?
Do you really think you will feel 5 hp?
Not likely worth the expense IMHO.
Now if you happen across one that's free then why not I suppose.
Not likely worth the expense IMHO.
Now if you happen across one that's free then why not I suppose.
Eric
Asylum Motorsports
"Where we're not happy 'til YOU'RE not happy!
'91 California Quad (Gone with just a bit of "Seller's Remorse".)
'92 3500 GT gone and not really missed. It was fun. Documented 13.47 N/A.
Asylum Motorsports
"Where we're not happy 'til YOU'RE not happy!
'91 California Quad (Gone with just a bit of "Seller's Remorse".)
'92 3500 GT gone and not really missed. It was fun. Documented 13.47 N/A.
Re: W41 Memcal part numbers?
Who knows, but spending ~$50 for 5hp sounds reasonable. If for nothing else, getting rid of the shift light is worth that!
1993 Quasar Quad4 GTZ - Project WTF
Previous Berettas: 90 GT, 93 Quasar GTZ, 93 Garnet GTZ, 93 Aqua GT
Previous Berettas: 90 GT, 93 Quasar GTZ, 93 Garnet GTZ, 93 Aqua GT
- Travelor
- Global Moderator
- Posts: 508
- Joined: Fri Jan 25, 2008 10:15 pm
- Location: Neenah, WI
- Contact:
Re: W41 Memcal part numbers?
The 93 SCX chip, when I tried one in my 90 didn't work. I traded for a 91 W41 chip that does work. However I don't run it because it puts the car into service mode. I'm not sure if you get the "full" 5hp with JUST the chip, but with the cams and chip you should get the full 10hp. Running the cams on a stock HO chip, there is still a good upgrade to the low end torque curve. When I did run the chip the upper end had a bit more pep. Maybe someone has dynoed it before/after?
What do you mean your shift light is gone?
What do you mean your shift light is gone?
1988 GTU
1990 GTZ
Beretta Preservation Society Chairman
"Have you painted your car in a parking lot today?"
1990 GTZ
Beretta Preservation Society Chairman
"Have you painted your car in a parking lot today?"
-
- Global Moderator
- Posts: 1991
- Joined: Sun Nov 03, 2002 4:10 pm
- Location: Concord, NC
- Contact:
Re: W41 Memcal part numbers?
Get a custom chip for your car; have it tuned. There are many more people out there now that are doing this as tuning is a necessity of engine modifications.
Geoff
95 Z26 Turbo 3400 5spd - R&D Project
Beretta Preservation Society - Director of Acquisitions
95 Z26 Turbo 3400 5spd - R&D Project
Beretta Preservation Society - Director of Acquisitions
Re: W41 Memcal part numbers?
With my old 93 GTZ, I ran a 93 SCX chip and aside from the higher revs the factory shift light never lit up again... I guess the SCX doesn't have a shift light?Travelor wrote:The 93 SCX chip, when I tried one in my 90 didn't work. I traded for a 91 W41 chip that does work. However I don't run it because it puts the car into service mode. I'm not sure if you get the "full" 5hp with JUST the chip, but with the cams and chip you should get the full 10hp. Running the cams on a stock HO chip, there is still a good upgrade to the low end torque curve. When I did run the chip the upper end had a bit more pep. Maybe someone has dynoed it before/after?
What do you mean your shift light is gone?
1993 Quasar Quad4 GTZ - Project WTF
Previous Berettas: 90 GT, 93 Quasar GTZ, 93 Garnet GTZ, 93 Aqua GT
Previous Berettas: 90 GT, 93 Quasar GTZ, 93 Garnet GTZ, 93 Aqua GT
-
- Registered User
- Posts: 98
- Joined: Tue Nov 27, 2012 7:14 pm
Re: W41 Memcal part numbers?
the SCX and W41 did not have shift lights to my knowledge...
or at least it seems it was left out in certain applications, maybe when combined with another RPO?
or at least it seems it was left out in certain applications, maybe when combined with another RPO?
-
- Registered User
- Posts: 740
- Joined: Mon Jan 17, 2011 6:48 pm
- Location: Meadville, PA
- Contact:
Re: W41 Memcal part numbers?
Jeff's hard to get ahold of I've been wanting him to burn me a chip for a month and he won't reply back
1990 Beretta GTZ Quad,226 cams, 3.94 W-41 trans
1990 Beretta GTZ Quad 4, 3.61 muncie 5 speed (project)
1968 Chevelle 300 deluxe 327ci 4 speed M-21, 12 bolt 4.10 posi
1978 Chevy K10 Z77 Sport 4x4
1977 GMC Sierra Classic 25 454 crew cab
-Ryan
1990 Beretta GTZ Quad 4, 3.61 muncie 5 speed (project)
1968 Chevelle 300 deluxe 327ci 4 speed M-21, 12 bolt 4.10 posi
1978 Chevy K10 Z77 Sport 4x4
1977 GMC Sierra Classic 25 454 crew cab
-Ryan
Re: W41 Memcal part numbers?
you ever hear w41 cams compared to h.o. cams? they sound bad ass. even on a stock muffler, they sound bad ass. plus you gain 10hp, every hp counts, it all ads up, a little here and a little there adds up.Asylum wrote:Do you really think you will feel 5 hp?
Not likely worth the expense IMHO.
Now if you happen across one that's free then why not I suppose.
1991 beretta GTZ- 2.3l w41 cams, ported 086 head with a 3 angle valve job, fidanza flywheel with exedy racing clutch, 3.94fdr from and scx, so much more..
-
- Registered User
- Posts: 740
- Joined: Mon Jan 17, 2011 6:48 pm
- Location: Meadville, PA
- Contact:
Re: W41 Memcal part numbers?
Ya no kidding I can't wait to get a header what 20+hp outta work real nice with my 226 cams all I need now is a fricking chip burnt it rarely lopes but when it does sounds like the 226 cammed grand am on YouTube
1990 Beretta GTZ Quad,226 cams, 3.94 W-41 trans
1990 Beretta GTZ Quad 4, 3.61 muncie 5 speed (project)
1968 Chevelle 300 deluxe 327ci 4 speed M-21, 12 bolt 4.10 posi
1978 Chevy K10 Z77 Sport 4x4
1977 GMC Sierra Classic 25 454 crew cab
-Ryan
1990 Beretta GTZ Quad 4, 3.61 muncie 5 speed (project)
1968 Chevelle 300 deluxe 327ci 4 speed M-21, 12 bolt 4.10 posi
1978 Chevy K10 Z77 Sport 4x4
1977 GMC Sierra Classic 25 454 crew cab
-Ryan