Interest in poly torque strut for ~ $40 shipped?

IsaacHayes · Post by **IsaacHayes** » Sat Mar 08, 2008 10:41 pm

I need to know how many would be interested in buying a billet aluminum CNC'ed poly filled torque strut?

Price ~$40 shipped in the US.
Billet Aluminum.
Filled with 80 shore polyurethane.

This would fit 92+ cars.
This is the mount it will replace.

If you are interested in buying one post in this thread. They will be ready in a couple of weeks once the go a head is given.

Thanks!

fastlane02 · Post by **fastlane02** » Sat Mar 08, 2008 11:30 pm

sound good are you making them or is some big buisness doing it?

2loud4u · Post by **2loud4u** » Sun Mar 09, 2008 1:15 pm

Where does that part go i've never seen that before?
but then again my g/f say's i'm blinder then a bat lol

is it for a quad 4 or the 3.1 or 3100?

spacecadetz26 · Post by **spacecadetz26** » Sun Mar 09, 2008 1:47 pm

my z needs one since ffp is out.

Asylum · Post by **Asylum** » Sun Mar 09, 2008 2:09 pm

MRZ makes them, Steph.

But $40 is a pretty good price IF they are any good.

Post by **heavywoody** » Sun Mar 09, 2008 2:52 pm

Yeah, $40 is a decent price, but like Eric said, MRZ has made these for about a year or so now... they look identical to the FFP ones, but since FFP is no longer an option... yeah.

MY91GT(Z) · Post by **MY91GT(Z)** » Sun Mar 09, 2008 3:14 pm

i would be interested pendin on when they will be done

IsaacHayes · Post by **IsaacHayes** » Sun Mar 09, 2008 5:34 pm

Yes, they will be a decent price. That was the goal. This first batch will be of 18-20 units and will be bonded with 2 part 80 shore polyurethane. If there is on going interest they could become a regular part and will probably have poly insert bushings slid in, but the price might go up a little bit due to sourcing out the bushings.

A fellow online member from another board is machining the stuff and I will be filling them with the poly and shipping them out.

2loud4u: passenger side, down low take off wheel splash guard and you'll see it. It is what keeps the motor from twisting back when you hit the gas. A firmer one will increase throttle response since the motor isn't rocking and instead transfers torque quicker to the chassis.

Do these fit the quad4's too? All I know is L and the older N bodies they fit, but not sure of engine's other than 3100.

So I got 2 interested so far?

spacecadetz26 · Post by **spacecadetz26** » Mon Mar 10, 2008 12:33 pm

for $40 i will buy 2. grand ma could use one since it ate 2 stockers already.

IsaacHayes · Post by **IsaacHayes** » Mon Mar 10, 2008 2:33 pm

Noted Steph. Also I have a thread on bstuff too. Looks like good chance I have enough interest to get started.

IsaacHayes · Post by **IsaacHayes** » Thu Mar 13, 2008 11:16 pm

The bstuff thread is more active, but to update we are close to finishing the design. It's down to 2 final designs right now. Getting closer.

Post by **Cliff8928** » Mon Mar 17, 2008 2:47 am

Any chance on making one an inch shorter for the 3100/3400 manual so I don't have to drill a second hole in the bracket. The old ones have both A and M holes. The new ones are all A holes.

Post by **quad4berettagtz** » Mon Mar 17, 2008 9:50 am

A holes... hehe... Sorry, I couldn't help myself!

Post by **Cliff8928** » Tue Mar 18, 2008 2:38 am

LOL, I knew that would happen...

IsaacHayes · Post by **IsaacHayes** » Wed Mar 19, 2008 9:41 pm

Not really sure what you are saying there, do you have a pic?

What years are you referring to?

Connect with your social network account