1996 Mr.Pink
- 3X00-Modified
- Administrator
- Posts: 10912
- Joined: Thu Jul 05, 2007 9:18 am
- Location: Brooklyn CT
Re: 1996 Mr.Pink
Stainless steel SI Valves ordered....
For those who didn't know including me... the 3500 Exhaust valve is already stainless steel but it's what they call a two piece... It's not a welded on tulip like most but it has a hardened steel tip on the top of the stem where it contacts the rocker. that is the only part of the valve that is not stainless. SO unfortunately going to stainless steel will not reduce exhaust valve pitting like I was hoping.
For those who didn't know including me... the 3500 Exhaust valve is already stainless steel but it's what they call a two piece... It's not a welded on tulip like most but it has a hardened steel tip on the top of the stem where it contacts the rocker. that is the only part of the valve that is not stainless. SO unfortunately going to stainless steel will not reduce exhaust valve pitting like I was hoping.
Re: 1996 Mr.Pink
We used to use them at the shop I work at as per the buyers instruction only to have a lot of the parts returned due to the time-serts either cracking or backing out on their own or with the bolt, Westinghouse amoung other large company's that we supply parts for switched to keen-serts due to their stronger build and "superior" locking system or so we were told..3X00-Modified wrote:Time-sert has a specific kit for the 3x00 rocker threads and it's the only brand that the machine shop I'm working with has ever used so I don't foresee there being an issue with them.
1 Of 1 Street Legal Centri S/c Beretta's In Existance
Re: 1996 Mr.Pink
I understand 100% on having a spare engine. That's what I was going to do with your valve springs. haha.
I never had any issues at the dealer when I used time-serts with red Loctite. But I imagine your machine shop uses them in a larger volume.
I never had any issues at the dealer when I used time-serts with red Loctite. But I imagine your machine shop uses them in a larger volume.
95' BRM Z26. cammed/ported 3400/3500 Hybrid. HM282, OBD2, Garret T3/T04E 60 Trim, IC.heavywoody wrote:Beretta, fast, reliable, and cost effective are words that should not be used in the same sentence.
- 3X00-Modified
- Administrator
- Posts: 10912
- Joined: Thu Jul 05, 2007 9:18 am
- Location: Brooklyn CT
Re: 1996 Mr.Pink
The kit just arrived yesterday, I will be using red loctite on them when they are installed and I doubt there will be any issues... I mean I'm not expecting them to hold a bunch of torque or anything, they have to be better than just aluminum threads
Kit arrived today at work and so did my valves... Unfortunately I'm out in New Jersey though so I can't see them. I'll be home on sunday and mess with all of it next week.
Kit arrived today at work and so did my valves... Unfortunately I'm out in New Jersey though so I can't see them. I'll be home on sunday and mess with all of it next week.
- 3X00-Modified
- Administrator
- Posts: 10912
- Joined: Thu Jul 05, 2007 9:18 am
- Location: Brooklyn CT
Re: 1996 Mr.Pink
Some more go fast parts...
Exhaust is slightly lighter than the stock one but the intake is heavier.
I'm hoping that the less dish in the back of the exhaust valve will change the CC's of my combustion chamber just enough to where I don't have to shave the heads, or at least make the amount necessary less... I should be able to CC them with these valves this week to verify.
Exhaust is slightly lighter than the stock one but the intake is heavier.
I'm hoping that the less dish in the back of the exhaust valve will change the CC's of my combustion chamber just enough to where I don't have to shave the heads, or at least make the amount necessary less... I should be able to CC them with these valves this week to verify.
- themixer
- Registered User
- Posts: 1569
- Joined: Fri Aug 14, 2009 12:13 pm
- Location: Truro, Nova Scotia. Canada
Re: 1996 Mr.Pink
That looks like fun! I have yet in my life to build an engine, or for that matter blow up one. Will be interested to see if these changes make it faster than asylums N/A record. If memory serves me correctly, believe he used a 3 speed automatic. Do you think the gearing between the two transmissions would make any differences in your 1/4 mile times?
- 3X00-Modified
- Administrator
- Posts: 10912
- Joined: Thu Jul 05, 2007 9:18 am
- Location: Brooklyn CT
Re: 1996 Mr.Pink
I have always been a believer that the gearing will change your 1/4 mile times as well as I believe that I am toting around more weight than Asylums car ever did... I have a full trim Z26 with AC and such... he just had a GT with no AC and the lighter 3t40.
Honestly I'll be happy with a 13.9 again...
Update on new final cam specs...
Dur@.006 268/282 Dur@.050 218/230 Total Lift .570/.568 109ICL 113LSA
Going with Pac 1218 springs
Honestly I'll be happy with a 13.9 again...
Update on new final cam specs...
Dur@.006 268/282 Dur@.050 218/230 Total Lift .570/.568 109ICL 113LSA
Going with Pac 1218 springs
- whiteretta
- Registered User
- Posts: 760
- Joined: Mon Jan 31, 2011 2:40 pm
- Location: New Carlisle, Ohio
- Contact:
Re: 1996 Mr.Pink
I can't wait to see what time you'll run once you get it all finished and dialed in... It's gonna get crazy!
- 3X00-Modified
- Administrator
- Posts: 10912
- Joined: Thu Jul 05, 2007 9:18 am
- Location: Brooklyn CT
- 3X00-Modified
- Administrator
- Posts: 10912
- Joined: Thu Jul 05, 2007 9:18 am
- Location: Brooklyn CT
Re: 1996 Mr.Pink
Did some CC'ing with the new valves in vs the old... I was getting a pretty steady 32cc before which is accurate since stock is 32.4 and these heads have been shaved twice so far... Well with the new SS valves I got a reading of 30.5 and I'm assuming that's due to the large dish change between the exhaust valves.
This is good because now I can easily get the heads to 30cc like I wanted and then shave .002 to .005 off the block to get it flat and perfect and all that work I'll end up with 10.5-10.58:1 compression ratio... PERFECT! Looks like I'll have to feed this pig at least 91 octane from now on.... It wont be happy with 87 like I've been giving it before. And yes it got 93 when I was at the strip running the NOS, it will probably need 98 now.
This is good because now I can easily get the heads to 30cc like I wanted and then shave .002 to .005 off the block to get it flat and perfect and all that work I'll end up with 10.5-10.58:1 compression ratio... PERFECT! Looks like I'll have to feed this pig at least 91 octane from now on.... It wont be happy with 87 like I've been giving it before. And yes it got 93 when I was at the strip running the NOS, it will probably need 98 now.
-
- Registered User
- Posts: 1255
- Joined: Sun Mar 12, 2006 12:11 am
- Location: Rochester New York
- Contact:
Re: 1996 Mr.Pink
That should give it a nice kick over the old setup for sure
93 GT cammed 3500 TORSEN, headers,intake,wilwood,poly/delrin mounts, 2.5 S.S,Exhaust,dickman kits,GTUspoiler,Euro headlights-tails-mirrors-fender flares-spoiler,Intrax/Koni,91+blk interior,rr disk swap,s.s.clutch line
-
- Registered User
- Posts: 677
- Joined: Thu Apr 26, 2001 3:11 pm
- Location: Charlotte, NC
Re: 1996 Mr.Pink
Would you buy that Race Gas in a can octane booster - or mix it with track bought gas?
2005 Chevrolet Corvette Z51
2005 GMC Sierra 2500HD
2014 Chevy SS
2005 GMC Sierra 2500HD
2014 Chevy SS
- 3X00-Modified
- Administrator
- Posts: 10912
- Joined: Thu Jul 05, 2007 9:18 am
- Location: Brooklyn CT
Re: 1996 Mr.Pink
the plastic "shot" bottle of octane enhancer is a .point increase of the treated 20 gallons.
example: '"raises octane 1 point" = 20 gallons of 87 octane + one bottle = 87.1'
example: '"raises octane 1 point" = 20 gallons of 87 octane + one bottle = 87.1'
_________
-------------
-------------
-
- Administrator
- Posts: 1775
- Joined: Wed Mar 03, 2004 10:03 pm
- Location: Long Grove, IL
- Contact:
Re: 1996 Mr.Pink
Exactly. That's why I tell people to just fill up with higher octane, it would cost less. But this stuff makes them feel good for some reason.1988GTU wrote:the plastic "shot" bottle of octane enhancer is a .point increase of the treated 20 gallons.
example: '"raises octane 1 point" = 20 gallons of 87 octane + one bottle = 87.1'
Cliff Scott