Various vehicle and spring heights....

Want some new struts? What brand springs to buy? How much camber to run? What brake pads? What's the best setup for your situation....
User avatar
3X00-Modified
Administrator
Posts: 10912
Joined: Thu Jul 05, 2007 9:18 am
Location: Brooklyn CT

Various vehicle and spring heights....

Post by 3X00-Modified »

I would like to get a bunch of contributions to this so we can document the ride heights of various spring combos on various cars/drivelines as well. This will give people a better idea what spring will do what.

My contribution so far..

1990 Indy 500 3.1/3spd Auto Eibach/Koni combination(225/50/16 Tires on stock 16" rims(24.9"DIA)) 25¾" Front 26" Rear. Circa 2013 (Brians Group buy) 2014 installed for Bfest.

1996 Z26 Conversion 3500/4spd Auto Eibach/Koni combination(225/45/17 Tires on 17" rims(25"DIA)) 25⅝" Front 26" Rear. Circa 2008 installed

I will probably add Canuck height for the 1996 before summer may also order a set for the Indy but not sure.

Photos to come, but I measured to the highest point of the wheel arch... which typically works out to being in line with the center of the wheel.


Mr.Pink
Supreme Unit
Sleepy Goodness
"Beretta Guy"
heavywoody
Global Moderator
Posts: 1991
Joined: Sun Nov 03, 2002 4:10 pm
Location: Concord, NC
Contact:

Re: Various vehicle and spring heights....

Post by heavywoody »

Might help to have a picture or two to show people where to measure correctly so we can compare apples to apples.

Great idea! I'll get mine and add it in here.


Geoff
95 Z26 Turbo 3400 5spd - R&D Project
Beretta Preservation Society - Director of Acquisitions
Image
User avatar
GTZfan
Registered User
Posts: 304
Joined: Thu Oct 28, 2010 3:20 pm

Re: Various vehicle and spring heights....

Post by GTZfan »

What I was thinking as well, because I don't know if there is an "official" definition of ride hight.
Shouldn't it optimally be measured from the body to the center of the wheelhub, to rule out custom tire/wheel sizes?


Image
1991 GTZ Quad4 black, all original, low miles. Beretta Calendar 2008, 2009, 2015
1992 GTZ Quad4 quaser, completely restored. Beretta Calendar 2011, 2012, 2013 images of the shiny quaser
User avatar
woody90gtz
Registered User
Posts: 4698
Joined: Thu Jul 11, 2002 8:45 pm
Location: Walton, NY
Contact:

Re: Various vehicle and spring heights....

Post by woody90gtz »

GTZfan wrote:What I was thinking as well, because I don't know if there is an "official" definition of ride hight.
Shouldn't it optimally be measured from the body to the center of the wheelhub, to rule out custom tire/wheel sizes?
Yes, exactly. This is the standard measurement I have always seen before.

Mine is put away right now, but I'll get over there and get a measurement soon.


91 "SS" - WOT 3400/5spd - 13.29@101.6 - World's fastest N/A FWD Beretta
96 "T56" LS/6spd/8.8 RWD swap - 13.45@104.7 lol
GEARHEAD dezign youtube
User avatar
3X00-Modified
Administrator
Posts: 10912
Joined: Thu Jul 05, 2007 9:18 am
Location: Brooklyn CT

Re: Various vehicle and spring heights....

Post by 3X00-Modified »

GTZfan wrote:What I was thinking as well, because I don't know if there is an "official" definition of ride hight.
Shouldn't it optimally be measured from the body to the center of the wheelhub, to rule out custom tire/wheel sizes?
We could do it that way... But I'm leaning towards having a list of combos up there so people can see it... by all means get that measurement but I think the easiest one for most to understand is from ground to top of wheel arch. Rim combo's shouldnt change that number by much unless someone is rocking a "tire" larger than 24.9-25" in diameter... that is the stock size. My fear is how accurate will people be measuring to the center of the wheel hub? Might be an easier number to do as I stated above and just list your tire size so we can verify that if it's and off size. Most of the popular combos will be 24.9 to 25, Referring to 205/55/16, 225/50/16, 225/45/17 and so on.

I added my wheel/tire sizes to my above list.


Mr.Pink
Supreme Unit
Sleepy Goodness
"Beretta Guy"
User avatar
Money pit Beretta
Registered User
Posts: 6411
Joined: Thu Jul 26, 2007 11:36 am
Location: Kansas

Re: Various vehicle and spring heights....

Post by Money pit Beretta »

Just now getting back after AT&T dropped me for not upgrading.

Could you measure the floor pan to ground or something better like the front subframe to ground? The frame is the key point. It's the place that scrapes first if you are too low.


keep'em flying!
User avatar
3X00-Modified
Administrator
Posts: 10912
Joined: Thu Jul 05, 2007 9:18 am
Location: Brooklyn CT

Re: Various vehicle and spring heights....

Post by 3X00-Modified »

The subframe always rides the same in comparison to the wheel arch so if you go off that number then you'll get an understanding. For example if someone posts FE7 or FE3 heights then you can safely assume the 1" or 1/2" drop between those numbers and my Eibach or someone's Canuck is the same for the undercarriage as it would be for the wheel arch. I want to try and keep this as simple as possible and not just gum it up with a bunch of different numbers.


Mr.Pink
Supreme Unit
Sleepy Goodness
"Beretta Guy"
heavywoody
Global Moderator
Posts: 1991
Joined: Sun Nov 03, 2002 4:10 pm
Location: Concord, NC
Contact:

Re: Various vehicle and spring heights....

Post by heavywoody »

1995 Z26 3400/5spd Manual
Eibach/Bilstein combination
225/50/16 tires on stock 16" rims
25 1/4" Front
25 5/8" Rear
Installed April 2001


Geoff
95 Z26 Turbo 3400 5spd - R&D Project
Beretta Preservation Society - Director of Acquisitions
Image
User avatar
3X00-Modified
Administrator
Posts: 10912
Joined: Thu Jul 05, 2007 9:18 am
Location: Brooklyn CT

Re: Various vehicle and spring heights....

Post by 3X00-Modified »

That goes to show you, everything sags with age... LOL.


Mr.Pink
Supreme Unit
Sleepy Goodness
"Beretta Guy"
Red_Bra_Black_GTZ
Registered User
Posts: 378
Joined: Tue Sep 11, 2007 3:02 pm
Location: Montreal, QC
Contact:

Re: Various vehicle and spring heights....

Post by Red_Bra_Black_GTZ »

90 gtz quad 4.
225/50/16 oem rims
suspension lowered, no info with what.
ride height, front 25 1/8", back 26 1/8", the back does bottom out on bumps, pot holes, the wider then oem tire hits the edge of the fender lip.


Image
User avatar
Money pit Beretta
Registered User
Posts: 6411
Joined: Thu Jul 26, 2007 11:36 am
Location: Kansas

Re: Various vehicle and spring heights....

Post by Money pit Beretta »

3X00-Modified wrote:The subframe always rides the same in comparison to the wheel arch so if you go off that number then you'll get an understanding. For example if someone posts FE7 or FE3 heights then you can safely assume the 1" or 1/2" drop between those numbers and my Eibach or someone's Canuck is the same for the undercarriage as it would be for the wheel arch. I want to try and keep this as simple as possible and not just gum it up with a bunch of different numbers.
Ok I understand. Damn helpful to go with the frame on the Cavy so I knew what size of plastic ramps to buy just to get the jack under it. Guess that could come later if needed.


keep'em flying!
EPfiffner
Registered User
Posts: 201
Joined: Tue May 31, 2016 3:54 pm

Re: Various vehicle and spring heights....

Post by EPfiffner »

1993 GT, 3.1, 3 speed auto, FE2.
Springs: OEM, Struts: OEM
Tires: 225/45-17 Wheels: 17" x 8"(?) Milla Miglia

Front: 26 1/2"
Rear: 26 1/2"

More proof that things sag with age. Was going to order Canucks, but I'm almost there!


User avatar
Asylum
Registered User
Posts: 3050
Joined: Wed Mar 31, 2004 9:36 am
Location: Hamilton, Ontario, Canada
Contact:

Re: Various vehicle and spring heights....

Post by Asylum »

I will measure my '91 Quad with 20 year old Eibachs later today and post the numbers.

EDIT!!

Measured the Quad today.

1991 with 20 year old Eibachs/ KYBS and 225/50/16's on GTU wheels.

Front is 25"

Rear is 25 1/2 inches.

Rides just fine on good roads, but I pay on bad ones, LOL!

:beer:


Eric

Asylum Motorsports
"Where we're not happy 'til YOU'RE not happy!






'91 California Quad (Gone with just a bit of "Seller's Remorse".)
'92 3500 GT gone and not really missed. It was fun. Documented 13.47 N/A.
speedy
Registered User
Posts: 1112
Joined: Mon Apr 05, 2010 9:10 pm

Re: Various vehicle and spring heights....

Post by speedy »

Me and brian noticed the stock gtz springs may actually sit lower then eibachs.


1991 beretta GTZ- 2.3l w41 cams, ported 086 head with a 3 angle valve job, fidanza flywheel with exedy racing clutch, 3.94fdr from and scx, so much more..
Red_Bra_Black_GTZ
Registered User
Posts: 378
Joined: Tue Sep 11, 2007 3:02 pm
Location: Montreal, QC
Contact:

Re: Various vehicle and spring heights....

Post by Red_Bra_Black_GTZ »

speedy wrote:Me and brian noticed the stock gtz springs may actually sit lower then eibachs.
R u comparing it to nick Romash? Does he have oem suspension.


Image
Post Reply