Finally found a GTZ

Tell us about your Beretta and Post an Image
Post Reply
stevenlc1992
Posts: 3
Joined: Wed Aug 24, 2016 11:25 am

Finally found a GTZ

Post by stevenlc1992 »

Hello there people of Beretta.net my name is Steven I'm 24 and im such a fan of these cars I just had to join this forum and share my love for these cars. Igot my first Beretta a 90 GT with a 3.1 auto sunroof and digital cluster when I was 16 "it was my first car and I freaking loved it but when I was 18 I had to get rid of it and I've been kicking my self ever since until about 5 months ago I finally found another Beretta a 90 GTZ for 400 not going to lie it was very Rough to say the least it had been recked missing its entire front end and most of its interior was destroyed the high out put quad 4 replaced with a low output 95 z24 cavalier motor 3 white wheels and 1 black but I saw its potential i knew it could be fix and today it's not done its from from being done the way I'm going to get it done but it runs and that's what matters to me but I would love some feed back on this GTZ now the photos are ones I took about 2weeks ago when I repainted the front end it was even worse than these pictures show
Attachments
received_293495034344668.jpeg
received_293495027678002.jpeg
received_293494937678011.jpeg
received_293494934344678.jpeg


stevenlc1992
Posts: 3
Joined: Wed Aug 24, 2016 11:25 am

Re: Finally found a GTZ

Post by stevenlc1992 »

Now after alot of searching I've got no where on an interior except a very used headliner but exterior it's looking pretty darn good
Attachments
received_300743686953136.jpeg


speedy
Registered User
Posts: 1112
Joined: Mon Apr 05, 2010 9:10 pm

Re: Finally found a GTZ

Post by speedy »

For the interior you could use a 94-96 dash and door panels.


1991 beretta GTZ- 2.3l w41 cams, ported 086 head with a 3 angle valve job, fidanza flywheel with exedy racing clutch, 3.94fdr from and scx, so much more..
stevenlc1992
Posts: 3
Joined: Wed Aug 24, 2016 11:25 am

Re: Finally found a GTZ

Post by stevenlc1992 »

Yea I'm starting to come to that conclusion I'd like to keep it true to being a 90 but it's just 2 hard to find but I kind of like the newer style at least I'll have cup holders then!!!!!!!! Lol but I will have to start calling scrap and salvage yards to see if I can get a package deal also if I upgrade the dash do I have to change any wiring harness


Post Reply