The Derretta, 1994 base with some attitude.
- whiteretta
- Registered User
- Posts: 760
- Joined: Mon Jan 31, 2011 2:40 pm
- Location: New Carlisle, Ohio
- Contact:
Re: RE: Re: The Derretta, 1994 base with some attitude.
Yeah bro! Haha...themixer wrote:JDM STANCE!
Sent from my VS501 using Tapatalk
- whiteretta
- Registered User
- Posts: 760
- Joined: Mon Jan 31, 2011 2:40 pm
- Location: New Carlisle, Ohio
- Contact:
Re: The Derretta, 1994 base with some attitude.
I'm still horrible at updating this. I'm also convinced this car needs a name change to Christine.
I let the car sit for a month out at my parents while I used my Caprice as a rolling project, to work out some bugs.
I finally went to pick the car back up and had it idling to warm up, when it died on it's own, no warning. I found my ignition module was cracked and replaced that, but to no avail. I warrantied out my IAC, and tested my MAP and TPS sensors which both are working properly. I couldn't find any vacuum leaks, so today I removed the catch can thinking it may have been the issue, along with replacing my FPR with a new unit. Still stalling in park. I'm at a loss on this one!
![Image](https://uploads.tapatalk-cdn.com/20171119/5887cd6c917dcd445725c46c7f1ad4c1.jpg)
![Image](https://uploads.tapatalk-cdn.com/20171119/427f2d6ca5b5ba32029ec004b375948b.jpg)
![Image](https://uploads.tapatalk-cdn.com/20171119/fbd24cb34804e0bbf2ea53eb6d7fb46e.jpg)
I did do something that worked at least! I picked up a pair of red Pilot 1156 LED's for $5, the car only uses one on the third brake light, but at that price who cares!
![Image](https://uploads.tapatalk-cdn.com/20171119/457dd524324b66fc0ed91b0b82ec4950.jpg)
![Image](https://uploads.tapatalk-cdn.com/20171119/755bb7590b261ea1e51492b18b7e0ed3.jpg)
![Image](https://uploads.tapatalk-cdn.com/20171119/877c2d1a202890a46eaa623dafb32451.jpg)
Sent from my VS501 using Tapatalk
I let the car sit for a month out at my parents while I used my Caprice as a rolling project, to work out some bugs.
I finally went to pick the car back up and had it idling to warm up, when it died on it's own, no warning. I found my ignition module was cracked and replaced that, but to no avail. I warrantied out my IAC, and tested my MAP and TPS sensors which both are working properly. I couldn't find any vacuum leaks, so today I removed the catch can thinking it may have been the issue, along with replacing my FPR with a new unit. Still stalling in park. I'm at a loss on this one!
![Image](https://uploads.tapatalk-cdn.com/20171119/5887cd6c917dcd445725c46c7f1ad4c1.jpg)
![Image](https://uploads.tapatalk-cdn.com/20171119/427f2d6ca5b5ba32029ec004b375948b.jpg)
![Image](https://uploads.tapatalk-cdn.com/20171119/fbd24cb34804e0bbf2ea53eb6d7fb46e.jpg)
I did do something that worked at least! I picked up a pair of red Pilot 1156 LED's for $5, the car only uses one on the third brake light, but at that price who cares!
![Image](https://uploads.tapatalk-cdn.com/20171119/457dd524324b66fc0ed91b0b82ec4950.jpg)
![Image](https://uploads.tapatalk-cdn.com/20171119/755bb7590b261ea1e51492b18b7e0ed3.jpg)
![Image](https://uploads.tapatalk-cdn.com/20171119/877c2d1a202890a46eaa623dafb32451.jpg)
Sent from my VS501 using Tapatalk
- whiteretta
- Registered User
- Posts: 760
- Joined: Mon Jan 31, 2011 2:40 pm
- Location: New Carlisle, Ohio
- Contact:
Re: The Derretta, 1994 base with some attitude.
I made my 6x9 bezels match finally! This is what happens when you find color matching interior paint on clearance, lol.
![Image](https://uploads.tapatalk-cdn.com/20171126/1371284c955ff8010788c3c4e7820889.jpg)
![Image](https://uploads.tapatalk-cdn.com/20171126/ea6ef6e0a3694e16d9790d3db1e0272c.jpg)
![Image](https://uploads.tapatalk-cdn.com/20171126/2be14971ff209a5ecf4fa4bee93113a0.jpg)
Sent from my VS501 using Tapatalk
![Image](https://uploads.tapatalk-cdn.com/20171126/1371284c955ff8010788c3c4e7820889.jpg)
![Image](https://uploads.tapatalk-cdn.com/20171126/ea6ef6e0a3694e16d9790d3db1e0272c.jpg)
![Image](https://uploads.tapatalk-cdn.com/20171126/2be14971ff209a5ecf4fa4bee93113a0.jpg)
Sent from my VS501 using Tapatalk
- whiteretta
- Registered User
- Posts: 760
- Joined: Mon Jan 31, 2011 2:40 pm
- Location: New Carlisle, Ohio
- Contact:
Re: The Derretta, 1994 base with some attitude.
I unplugged my IAC valve today so I could keep the car running and do a voltage test on the coolant temp sensor.
It started out at about 3.2 volts, and by the time I decided to walk away it was at around 1 volt, I walked back to the car about a minute later, and it was back up to 3 volts.
Looks like I'll be ordering a new temp sensor, lol.
And then, the last wash of the year...
![Image](https://uploads.tapatalk-cdn.com/20171127/a2b2cef9fc7523d262b6392ae531e788.jpg)
![Image](https://uploads.tapatalk-cdn.com/20171127/0be10262dd7512caa26ed6237697ed3f.jpg)
![Image](https://uploads.tapatalk-cdn.com/20171127/4f89fac5c5b70ba53872d7dbd5694856.jpg)
Sent from my VS501 using Tapatalk
It started out at about 3.2 volts, and by the time I decided to walk away it was at around 1 volt, I walked back to the car about a minute later, and it was back up to 3 volts.
Looks like I'll be ordering a new temp sensor, lol.
And then, the last wash of the year...
![Image](https://uploads.tapatalk-cdn.com/20171127/a2b2cef9fc7523d262b6392ae531e788.jpg)
![Image](https://uploads.tapatalk-cdn.com/20171127/0be10262dd7512caa26ed6237697ed3f.jpg)
![Image](https://uploads.tapatalk-cdn.com/20171127/4f89fac5c5b70ba53872d7dbd5694856.jpg)
Sent from my VS501 using Tapatalk
- whiteretta
- Registered User
- Posts: 760
- Joined: Mon Jan 31, 2011 2:40 pm
- Location: New Carlisle, Ohio
- Contact:
Re: The Derretta, 1994 base with some attitude.
Lookie what I found, still cleans up well too!
![Image](https://uploads.tapatalk-cdn.com/20171202/32b2cc930c1c0791fc332ae07eb7d40c.jpg)
Sent from my VS501 using Tapatalk
![Image](https://uploads.tapatalk-cdn.com/20171202/32b2cc930c1c0791fc332ae07eb7d40c.jpg)
Sent from my VS501 using Tapatalk
- whiteretta
- Registered User
- Posts: 760
- Joined: Mon Jan 31, 2011 2:40 pm
- Location: New Carlisle, Ohio
- Contact:
Re: The Derretta, 1994 base with some attitude.
New temp sensor installed a few weeks back, fixed the problem! Did a retune, now the car just fires up and dies. Giving it gas doesn't even help. The tuner doesn't even recognize the ECM now either.
I did find out I had an old repo box under the dash, so I tore that out but to no avail. I'm wondering if a connection may have been temporarily lost during the tuning that may have made the chip in the ECM fail...
Here's the old repo box, made in 1994, haha.
![Image](https://uploads.tapatalk-cdn.com/20171220/5336e73794ce40eb18c5251dd531e2f7.jpg)
Sent from my VS501 using Tapatalk
I did find out I had an old repo box under the dash, so I tore that out but to no avail. I'm wondering if a connection may have been temporarily lost during the tuning that may have made the chip in the ECM fail...
Here's the old repo box, made in 1994, haha.
![Image](https://uploads.tapatalk-cdn.com/20171220/5336e73794ce40eb18c5251dd531e2f7.jpg)
Sent from my VS501 using Tapatalk
Re: The Derretta, 1994 base with some attitude.
I wonder if every car bought on loan is given a repo box.
Or do they only get the box after the first repossession?
Or do they only get the box after the first repossession?
- whiteretta
- Registered User
- Posts: 760
- Joined: Mon Jan 31, 2011 2:40 pm
- Location: New Carlisle, Ohio
- Contact:
Re: RE: Re: The Derretta, 1994 base with some attitude.
I think it's more of a buy here pay here, where if you don't pay they shut the car off? I mean, sounds right, lol.GT_Indy wrote:I wonder if every car bought on loan is given a repo box.
Or do they only get the box after the first repossession?
Sent from my VS501 using Tapatalk
-
- Registered User
- Posts: 1255
- Joined: Sun Mar 12, 2006 12:11 am
- Location: Rochester New York
- Contact:
Re: The Derretta, 1994 base with some attitude.
Yes it's generally buy here pay here places, I've installed these before. It was quite funny when didn't have the funds long ago I had transmission work done at aamco and didn't have the money, so how I learned to take the thing off my car to know how to install it too helped me when working at friends garage
93 GT cammed 3500 TORSEN, headers,intake,wilwood,poly/delrin mounts, 2.5 S.S,Exhaust,dickman kits,GTUspoiler,Euro headlights-tails-mirrors-fender flares-spoiler,Intrax/Koni,91+blk interior,rr disk swap,s.s.clutch line
- whiteretta
- Registered User
- Posts: 760
- Joined: Mon Jan 31, 2011 2:40 pm
- Location: New Carlisle, Ohio
- Contact:
Re: RE: Re: The Derretta, 1994 base with some attitude.
They do seem easy enough to install based on the ease of removal!MY91GT(Z) wrote:Yes it's generally buy here pay here places, I've installed these before. It was quite funny when didn't have the funds long ago I had transmission work done at aamco and didn't have the money, so how I learned to take the thing off my car to know how to install it too helped me when working at friends garage
I ordered another ECM off of eBay, it arrived today but with it being in the teens as a high, and my garage being an ice box... I'll install it and program it another day!
I sold the old poly dash cover too. I'll be replacing it with a velour one by Spring.
Sent from my VS501 using Tapatalk
- whiteretta
- Registered User
- Posts: 760
- Joined: Mon Jan 31, 2011 2:40 pm
- Location: New Carlisle, Ohio
- Contact:
Re: The Derretta, 1994 base with some attitude.
Tomorrow the new calendar will be turned back to January, but I sure do like this view on my wall!
![Image](https://uploads.tapatalk-cdn.com/20171231/aa00cf9835f7d76b6dffc628f1812ade.jpg)
![Image](https://uploads.tapatalk-cdn.com/20171231/6506e79aaa8f9551139e3edb867fbc36.jpg)
Sent from my VS501 using Tapatalk
![Image](https://uploads.tapatalk-cdn.com/20171231/aa00cf9835f7d76b6dffc628f1812ade.jpg)
![Image](https://uploads.tapatalk-cdn.com/20171231/6506e79aaa8f9551139e3edb867fbc36.jpg)
Sent from my VS501 using Tapatalk
- whiteretta
- Registered User
- Posts: 760
- Joined: Mon Jan 31, 2011 2:40 pm
- Location: New Carlisle, Ohio
- Contact:
Re: The Derretta, 1994 base with some attitude.
I got my new ECM in, and the new one is tuneable! Problem solved? Nope!
I found my external crank trigger wasn't even close to being lined up, so I took it to my work and taught it a lesson with a vice and a big hammer. Problem solved? Nope!
So far the MAP, IAC, TPS, coolant temp, crank sensor, and ignition module are all passing. Running out of options now...
![Image](https://uploads.tapatalk-cdn.com/20180108/387cdd35faae2ad51863612d01a11051.jpg)
![Image](https://uploads.tapatalk-cdn.com/20180108/ccda27fa6a36e6f11aeb691270143dbe.jpg)
![Image](https://uploads.tapatalk-cdn.com/20180108/3761212e830f5f69aff917e84c511550.jpg)
Sent from my VS501 using Tapatalk
I found my external crank trigger wasn't even close to being lined up, so I took it to my work and taught it a lesson with a vice and a big hammer. Problem solved? Nope!
So far the MAP, IAC, TPS, coolant temp, crank sensor, and ignition module are all passing. Running out of options now...
![Image](https://uploads.tapatalk-cdn.com/20180108/387cdd35faae2ad51863612d01a11051.jpg)
![Image](https://uploads.tapatalk-cdn.com/20180108/ccda27fa6a36e6f11aeb691270143dbe.jpg)
![Image](https://uploads.tapatalk-cdn.com/20180108/3761212e830f5f69aff917e84c511550.jpg)
Sent from my VS501 using Tapatalk
- woody90gtz
- Registered User
- Posts: 4703
- Joined: Thu Jul 11, 2002 8:45 pm
- Location: Walton, NY
- Contact:
Re: The Derretta, 1994 base with some attitude.
Are you positive the new ECM is good? Can't find any issues with the wiring?
91 "SS" - WOT 3400/5spd - 13.29@101.6 - World's fastest N/A FWD Beretta
96 "T56" LS/6spd/8.8 RWD swap - 13.45@104.7 lol
GEARHEAD dezign youtube
96 "T56" LS/6spd/8.8 RWD swap - 13.45@104.7 lol
GEARHEAD dezign youtube
- whiteretta
- Registered User
- Posts: 760
- Joined: Mon Jan 31, 2011 2:40 pm
- Location: New Carlisle, Ohio
- Contact:
Re: RE: Re: The Derretta, 1994 base with some attitude.
Jon mentioned on Facebook that it may be a corrupt tune file that's killing the ECM's, it makes sense. I put the tune in the new ECM, then can't connect anymore...woody90gtz wrote:Are you positive the new ECM is good? Can't find any issues with the wiring?
I ordered another ECM, I should be seeing it in a week. I deleted the tune files I was using, and modified the stock tune with the basics. Injector flowrate, EGR activation RPM, governor and rev limiter.
Sent from my VS501 using Tapatalk