The Derretta, 1994 base with some attitude.
-
- Global Moderator
- Posts: 1991
- Joined: Sun Nov 03, 2002 4:10 pm
- Location: Concord, NC
- Contact:
Re: The Derretta, 1994 base with some attitude.
Getting the truck lenses for like an 88 GMC truck from LMC trucks allows to use the factory bulbs so you don't have to mess with the wiring. Just a heads up!
Geoff
95 Z26 Turbo 3400 5spd - R&D Project
Beretta Preservation Society - Director of Acquisitions
95 Z26 Turbo 3400 5spd - R&D Project
Beretta Preservation Society - Director of Acquisitions
- whiteretta
- Registered User
- Posts: 760
- Joined: Mon Jan 31, 2011 2:40 pm
- Location: New Carlisle, Ohio
- Contact:
Re: RE: Re: The Derretta, 1994 base with some attitude.
I've been rewired for the 9003's for a few years already, so I'm good haha. I just had to go through and fix all of my ghetto wiring. I really like my little mini bulbs in the low beams on the factory euro lenses too.heavywoody wrote:Getting the truck lenses for like an 88 GMC truck from LMC trucks allows to use the factory bulbs so you don't have to mess with the wiring. Just a heads up!
The LMC lenses still do look pretty killer on Shawn's old car though! The euro setup does look awesome with those lenses...
Sent from my VS501 using Tapatalk
- whiteretta
- Registered User
- Posts: 760
- Joined: Mon Jan 31, 2011 2:40 pm
- Location: New Carlisle, Ohio
- Contact:
Re: The Derretta, 1994 base with some attitude.
Internal rear bar sand blasted and powdercoated, rear axle in the process of being POR-15'd!
Sent from my VS501 using Tapatalk
Sent from my VS501 using Tapatalk
- whiteretta
- Registered User
- Posts: 760
- Joined: Mon Jan 31, 2011 2:40 pm
- Location: New Carlisle, Ohio
- Contact:
Re: The Derretta, 1994 base with some attitude.
I got that motivation today! Switched out my bad fender, finished the headlight wiring and looming, switched the filament bulbs for white LED's for the running lights, and finished POR-15ing the rear axle!
Sent from my VS501 using Tapatalk
Sent from my VS501 using Tapatalk
- whiteretta
- Registered User
- Posts: 760
- Joined: Mon Jan 31, 2011 2:40 pm
- Location: New Carlisle, Ohio
- Contact:
Re: The Derretta, 1994 base with some attitude.
Just need to slap my vinyl stripes on the other fender...
Sent from my VS501 using Tapatalk
Sent from my VS501 using Tapatalk
- whiteretta
- Registered User
- Posts: 760
- Joined: Mon Jan 31, 2011 2:40 pm
- Location: New Carlisle, Ohio
- Contact:
Re: The Derretta, 1994 base with some attitude.
Going back to factory. Gotta keep her cool.
Sent from my VS501 using Tapatalk
Sent from my VS501 using Tapatalk
- whiteretta
- Registered User
- Posts: 760
- Joined: Mon Jan 31, 2011 2:40 pm
- Location: New Carlisle, Ohio
- Contact:
Re: The Derretta, 1994 base with some attitude.
The other fender is finished! Now for all of the little air bubbles to go away...
You can't really see it, but I picked up a new red cone filter as well.
Sent from my VS501 using Tapatalk
You can't really see it, but I picked up a new red cone filter as well.
Sent from my VS501 using Tapatalk
- 3X00-Modified
- Administrator
- Posts: 10912
- Joined: Thu Jul 05, 2007 9:18 am
- Location: Brooklyn CT
Re: The Derretta, 1994 base with some attitude.
Explain this one to me... With the 90* bend on the back of the stock bulb I was unable to use those with my LMC lights... I had to use the straight 9005/9006 variation... Granted yes I was able to keep the factory plugs, but the bulb itself was different..heavywoody wrote:Getting the truck lenses for like an 88 GMC truck from LMC trucks allows to use the factory bulbs so you don't have to mess with the wiring. Just a heads up!
I have this style now...
Vs stock
-
- Global Moderator
- Posts: 1991
- Joined: Sun Nov 03, 2002 4:10 pm
- Location: Concord, NC
- Contact:
Re: The Derretta, 1994 base with some attitude.
I'll look on my car, but I don't remember having that issue. I may have noticed it when I cut the header panel and made appropriate cuts to compensate for it.
Geoff
95 Z26 Turbo 3400 5spd - R&D Project
Beretta Preservation Society - Director of Acquisitions
95 Z26 Turbo 3400 5spd - R&D Project
Beretta Preservation Society - Director of Acquisitions
- 3X00-Modified
- Administrator
- Posts: 10912
- Joined: Thu Jul 05, 2007 9:18 am
- Location: Brooklyn CT
Re: The Derretta, 1994 base with some attitude.
I don't believe it was the header panel that was in the way... I feel like it was the Euro headlight housing itself.
Re: RE: Re: The Derretta, 1994 base with some attitude.
Your right, you have to notch out the euro housing to use the right angle plug. Here's a picture of mine.3X00-Modified wrote:I don't believe it was the header panel that was in the way... I feel like it was the Euro headlight housing itself.
1995 Beretta Z26
1996 Beretta Z26 ( convertible project)
1990 Indy 17,802 miles
Last edited by Nicjensen on Thu Feb 08, 2018 1:02 pm, edited 1 time in total.
- 3X00-Modified
- Administrator
- Posts: 10912
- Joined: Thu Jul 05, 2007 9:18 am
- Location: Brooklyn CT
Re: The Derretta, 1994 base with some attitude.
Ok, I'm not going crazy...
I also tried the LED lights in my Euro housings... I was far from impressed on the light output from them... Looked cool, but did not provide enough light so that's why I went back to Silverstar bulbs... 9006xs and 9005xs... Not many brands make the XS version.
I also tried the LED lights in my Euro housings... I was far from impressed on the light output from them... Looked cool, but did not provide enough light so that's why I went back to Silverstar bulbs... 9006xs and 9005xs... Not many brands make the XS version.
Re: RE: Re: The Derretta, 1994 base with some attitude.
I have led low beams and they are brighter than my silver stars.3X00-Modified wrote:Ok, I'm not going crazy...
I also tried the LED lights in my Euro housings... I was far from impressed on the light output from them... Looked cool, but did not provide enough light so that's why I went back to Silverstar bulbs... 9006xs and 9005xs... Not many brands make the XS version.
1995 Beretta Z26
1996 Beretta Z26 ( convertible project)
- 3X00-Modified
- Administrator
- Posts: 10912
- Joined: Thu Jul 05, 2007 9:18 am
- Location: Brooklyn CT
Re: The Derretta, 1994 base with some attitude.
Never said they weren't brighter to they eye... But the light they throw on the road was just not as concentrated as a standard filament bulb... Maybe it was due to the brand I bought and the LED pads were not positioned in the best spot to reflect properly, but all I know is the road is lit up way better with the halogen bulbs in there now.
- whiteretta
- Registered User
- Posts: 760
- Joined: Mon Jan 31, 2011 2:40 pm
- Location: New Carlisle, Ohio
- Contact:
Re: The Derretta, 1994 base with some attitude.
I'm running Silverstar ZXE's in the low beams, and they're pretty dang bright. I'll stick with them!
Sent from my VS501 using Tapatalk
Sent from my VS501 using Tapatalk