Page 9 of 11
Re: Tylers (aka Slinkys) Build
Posted: Mon May 05, 2014 10:27 am
by 3X00-Modified
Centrifugal SC's are actually not as loud as say a roots type.. but yeah it should sound nice.
Re: Tylers (aka Slinkys) Build
Posted: Mon May 05, 2014 12:40 pm
by MY91GT(Z)
This will prolly end up being the fastest non turbo Beretta built n hope to see 11s out of this at least
Re: Tylers (aka Slinkys) Build
Posted: Mon May 05, 2014 12:56 pm
by 3X00-Modified
Non turbo?... It's a belt driven turbo! LOL
Re: Tylers (aka Slinkys) Build
Posted: Mon May 05, 2014 5:11 pm
by Slinky
3X00-Modified wrote:
Tyler made an extension wire for his harness to get to the sensor plug....... Great in theory... BUT DON'T CRIMP WIRES!!!!!!!!
I plead the 5th!
3X00-Modified wrote:
Also filled the aftercooler setup talk about a PAIN IN THE ARSE to get the bubbles out of that thing.
Yeah i remember it take a long time to get the fluid to circulate properly.
3X00-Modified wrote:
Oh and Tyler's response to all my TXT's about his wiring problems... "this is why your doing it and not me!" LOL
I wasn't going to make it easy for you
Re: Tylers (aka Slinkys) Build
Posted: Tue May 06, 2014 9:44 am
by 3X00-Modified
Not the best quality video since it's on facebook... I'm trying to get one to upload to photobucket but it's failing miserably... Twice now photobucket has said it was a successful upload but nothing is in the album...
Facebook link removed, it sucked...
Youtube better.... HD
Running Vid
Re: Tylers (aka Slinkys) Build
Posted: Tue May 06, 2014 10:43 am
by SummitBalt08
3X00-Modified wrote:Not the best quality video since it's on facebook... I'm trying to get one to upload to photobucket but it's failing miserably... Twice now photobucket has said it was a successful upload but nothing is in the album...
Facebook link removed, it sucked...
Youtube better.... HD
Running Vid
I couldn't get a video to upload to photobucket from my phone either... What I had to do was upload the video straight to facebook then download it in HD to my laptop, then from my laptop it easily uploads to photobucket
Sent from my EVO LTE using Tapatalk 2
Re: Tylers (aka Slinkys) Build
Posted: Tue May 06, 2014 1:56 pm
by nocutt
3X00-Modified wrote:Not the best quality video since it's on facebook... I'm trying to get one to upload to photobucket but it's failing miserably... Twice now photobucket has said it was a successful upload but nothing is in the album...
Facebook link removed, it sucked...
Youtube better.... HD
Running Vid
Very Nice!! bet you are like this
and slinky is like this
hahahahahahaha
the engine is soft spoken, interesting to hear it opened up...what is the size of the xhaust pipe?
I should be following with mine within two weeks... I hopes!! got to chase a faulty ground and DOA optima battery...
Posted: Tue May 06, 2014 10:21 pm
by 3X00-Modified
2.5" exhaust, remember that video was done with my phone, I will do another when it's idling properly with a better tune on it with my dslr camera.
It's not very soft spoken when you open up the throttle that's for sure.
Re:
Posted: Wed May 07, 2014 5:36 am
by Slinky
3X00-Modified wrote:2.5" exhaust, remember that video was done with my phone, I will do another when it's idling properly with a better tune on it with my dslr camera.
It's not very soft spoken when you open up the throttle that's for sure.
If it's not loud enough he can always open the electronic cutout
Posted: Wed May 07, 2014 6:26 am
by 3X00-Modified
Yeah you may want to rethink that, it does slightly leak and it hangs low! LOL
Re:
Posted: Wed May 07, 2014 6:32 am
by Slinky
3X00-Modified wrote:Yeah you may want to rethink that, it does slightly leak and it hangs low! LOL
Yeah im going to make a shield for it i think, i tucked it up in as far as possible
Re:
Posted: Thu May 08, 2014 4:40 pm
by 99GaGT3X00
3X00-Modified wrote:Yeah you may want to rethink that, it does slightly leak and it hangs low! LOL
car sounds nice and nice work Jon..
don't remember if you ever saw my exhaust setup but mine hangs pretty low too. whether it's the cutout or the round magnaflow muffler i run depending on the situation it lays pipe a lot. the covers at the gas station forget about it and the occasional back road that has ruts in the pavement with a high center..
Re: Tylers (aka Slinkys) Build
Posted: Fri May 09, 2014 2:38 pm
by Slinky
Think it will be okay too, unless Jon takes my car off-roading hahaha
Re: Tylers (aka Slinkys) Build
Posted: Fri May 09, 2014 6:22 pm
by 1988GTU
What's a "Yada Yada Yada..." mod? Can those be bought at Autozone??!!?!
Re: Tylers (aka Slinkys) Build
Posted: Mon May 12, 2014 8:21 am
by 3X00-Modified
Another video, this time with the DSLR camera...
Idle/Rev and exhaust note
And of course you can buy the yada yada mod at Autozone... they have EVERYTHING you would ever need to make your car run 10's.