Muffler hanger 95 Z26
- DickieB
- Registered User
- Posts: 1
- Joined: Fri May 16, 2008 11:07 pm
- Location: North Central WV
- Contact:
Muffler hanger 95 Z26
I am looking for the band type muffler hanger and the part that mounts to the frame for a 95 Z26 if you got one please email me at DickieB205@aol.com Thanks
- Money pit Beretta
- Registered User
- Posts: 6411
- Joined: Thu Jul 26, 2007 11:36 am
- Location: Kansas
Muffler hanger 95 Z26
I have a 95 base and was looking for the samething. I searched and found out that Walker makes them and the # is 36153. You will have to find a Walker dealer in your area.
keep'em flying!
-
- Administrator
- Posts: 1775
- Joined: Wed Mar 03, 2004 10:03 pm
- Location: Long Grove, IL
- Contact:
Muffler hanger 95 Z26
Maremont also makes one and they can order it at Autozone. I don't even think it costs $10 for the part that goes around the muffler. The part that bolts to the frame rail may not be available aftermarket.
Cliff Scott


- IsaacHayes
- Registered User
- Posts: 975
- Joined: Fri Oct 07, 2005 8:32 pm
- Location: Missouri
Muffler hanger 95 Z26
My car is a 94, which has a hanger on the pipe before the muffler, but I went ahead and installed the 95+ muffler strap setup. Since my muffler is aftermarket and smaller, I used some strap you get at a parts store and it rusted off shortly.
Then I got some stainless steel metal and bent 2 halves secured each end with stainless screws and nuts. The stainless steel was scrap from a HVAC flu or something. But it worked very well with my stainless muffler I also added a stainless hose clamp to keep the metal bracket that goes in the rubber mount attached since the rubber was ripped on the side. works great.
Then I got some stainless steel metal and bent 2 halves secured each end with stainless screws and nuts. The stainless steel was scrap from a HVAC flu or something. But it worked very well with my stainless muffler I also added a stainless hose clamp to keep the metal bracket that goes in the rubber mount attached since the rubber was ripped on the side. works great.