Page 9 of 12
Interest in poly torque strut for ~ $40 shipped?
Posted: Fri Apr 18, 2008 6:59 pm
by IsaacHayes
No problem!
Interest in poly torque strut for ~ $40 shipped?
Posted: Tue Apr 22, 2008 3:55 pm
by IsaacHayes
Just got word the rest of the ES mounts are done being tweaked. So they should be coming to me soon!
Interest in poly torque strut for ~ $40 shipped?
Posted: Wed Apr 30, 2008 5:39 pm
by IsaacHayes
EnergySuspension Mounts are now here!
CNC machined for clearance to work on ANY and all subframes! (apparently mine so far is the only one that needed it! LOL):
Still plenty thick and strong:
Reversible if you prefer not to show the 60* side:
HOW TO rebuild if ever needs to be in future:
If replacing filled mount, cut out poly from top so it will push through hole, and push out.
If replacing ES mount, push out bolt sleeves with a vise, or tap it out with a hammer using a dowel/pipe etc. Then pry with screwdriver on the flange and pull out poly.
Mount uses 2 different sized flange bushings. Each part # comes with 2 so you will have 1 set of spares left over for another mount or for another friend's mount.
Bushings are replaceable on all mounts. Rear bushing part #9.9107G and drops right in.
Front bushing part number #9.9482G. You can re-use bolt sleeve if you have ES mount already, or cut new 3mm shorter if you have the filled mount. Then trim/sand inside of bushings 3mm shorter on one, or 1.5mm on each:
Parts can be ordered through
www.Summitracing.com or
www.energrysuspensionparts.com
After trimming/sanding poly down and assembled it should be 6mm sticking out. If more, then you didn't trim enough.
......
Still have the narrower filled mount left. This is the last filled mount.
Also have one ES mount where the RCG is different looking on the reverse side.
If you would like this one or would not let me know. I'll save it till the last one unless someone claims it first.
.......................
Z26-T and MYEUROGT(Z) your mounts are shipping today!
Interest in poly torque strut for ~ $40 shipped?
Posted: Mon May 05, 2008 8:14 pm
by IsaacHayes
Stock I have right now:
1 Filled narrow mount.
3 ES flange bushing mounts.
BUMP!!!! I'm still in the negative from this project guys.... Someone help me out and at the same time get a good deal on a performance mount!!! I'm loving mine car is so much more responsive!
Interest in poly torque strut for ~ $40 shipped?
Posted: Mon May 05, 2008 8:41 pm
by Money pit Beretta
I may have a need for one, lost my FFP on my 90GT in the crash. I'm trying to buy a 95 with a 3100 and auto trans(this may take some time). Just thought I'd put it out there so you know I have interest.
Interest in poly torque strut for ~ $40 shipped?
Posted: Mon May 05, 2008 10:20 pm
by Z26-T
It's a lot bigger than I thought it would be, seems extremely tough
Interest in poly torque strut for ~ $40 shipped?
Posted: Mon May 05, 2008 11:05 pm
by IsaacHayes
Money Pit, thanks. If you get a car before they are all out let me know and I'll put your name on one.
Interest in poly torque strut for ~ $40 shipped?
Posted: Tue May 06, 2008 7:43 pm
by Money pit Beretta
Thanks man, that would be great. I think that I'm going to look at the car this weekend.
Interest in poly torque strut for ~ $40 shipped?
Posted: Sun May 11, 2008 11:05 am
by Money pit Beretta
Well, the car wasn't in as good of shape as I thought it was. It wasn't too bad, I went crazy bought it. So, yes I will take one. On Monday I'll be working out everything on the buy.
Interest in poly torque strut for ~ $40 shipped?
Posted: Sun May 11, 2008 3:26 pm
by IsaacHayes
Right on. Details for payment are here:
http://www.beretta.net/board....ntry114
Interest in poly torque strut for ~ $40 shipped?
Posted: Mon May 12, 2008 9:03 pm
by Money pit Beretta
I'll try to get the money sent this weekend. I'm not set up with PayPal will it still work?
Interest in poly torque strut for ~ $40 shipped?
Posted: Mon May 12, 2008 9:57 pm
by IsaacHayes
Uhm, you need a PP account to send money, but if you need to I can accept a money order... Still waiting on a money order someone else said they sent..... ?? :|
I can PM you my address if you would like to send a MO
Interest in poly torque strut for ~ $40 shipped?
Posted: Sun May 18, 2008 6:07 pm
by Money pit Beretta
I just sent a MO today. Thanks for holding one for me.
Interest in poly torque strut for ~ $40 shipped?
Posted: Mon May 19, 2008 2:25 pm
by IsaacHayes
MoneyPit thanks! I'll be looking for it! I'll let you know when it goes out.
Interest in poly torque strut for ~ $40 shipped?
Posted: Mon May 19, 2008 8:20 pm
by Money pit Beretta
Cool man, can't wait to see it.