Page 2 of 3

Re: 1990 Beretta GT 3.1 auto PARTS CAR

Posted: Thu Dec 17, 2009 5:22 pm
by JeffD
i won't be able to check for a few days, I'm away from home, but I wouldn't count on them being any good...

Re: 1990 Beretta GT 3.1 auto PARTS CAR

Posted: Thu Dec 17, 2009 6:59 pm
by Luckymc420
I need the driver side sub frame mount. I think that side and year have the dog bone motor mount. Also if you have the Vibration pully tone ring. Id like that to.

Re: 1990 Beretta GT 3.1 auto PARTS CAR

Posted: Sun Dec 20, 2009 10:29 pm
by JeffD
ok, the sub frame is do-able, but the 3.1 T motor does not have a tone ring on the harmonic balancer. the sub frame might be a week or two, I'm pulling the car in next week and will begin to strip it clean then.

Re: 1990 Beretta GT 3.1 auto PARTS CAR

Posted: Sun Dec 20, 2009 10:44 pm
by Luckymc420
WOW well im glad you didn't start pulling it out yet. I made a mistake. I need the right side. So pass. side.

Re: 1990 Beretta GT 3.1 auto PARTS CAR

Posted: Sun Dec 20, 2009 10:51 pm
by JeffD
I think I may have a 3400 tone ring which should be the same part you were looking for, I'll check tomorrow night.

Re: 1990 Beretta GT 3.1 auto PARTS CAR

Posted: Tue Dec 29, 2009 10:54 pm
by JeffD
Nope... don't have the tone ring. sorry. I will let you know when I get the subframe out.

Re: 1990 Beretta GT 3.1 auto PARTS CAR

Posted: Wed Dec 30, 2009 4:10 pm
by Luckymc420
Thanks for lookin.

Re: 1990 Beretta GT 3.1 auto PARTS CAR

Posted: Thu Jan 14, 2010 3:14 pm
by JeffD
how do you want to ship it? the car is stripped all except the sub frame, so it should be soon. if I'm not mistaken they are not light!

Re: 1990 Beretta GT 3.1 auto PARTS CAR

Posted: Thu Jan 14, 2010 7:25 pm
by IsaacHayes
87-91 would have a dogbone/torque strut only on the drivers side subframe that attaches to the trans.
92-93 would have dogbone on the passenger side attached to the motor.
94-96 same as 92-93 but takes the newer style control arms.

My orange car has 92-93 subframes, but I will put a 87-91 drivers side so I can run a torque strut on the trans as well. Dual dogbones FTW!
Along with the 92+ dual trans mount, that should hold everything well. I'll have 2 poly dogbones. (going to use the fiero torque strut prothane kit into a stock dogbone for the drivers side)

Re: 1990 Beretta GT 3.1 auto PARTS CAR

Posted: Thu Jan 14, 2010 8:01 pm
by Luckymc420
Im not waiting on the part so it does not matter if it takes a week or longer to get it here. I bet they are like 10 pounds or so.

Re: 1990 Beretta GT 3.1 auto PARTS CAR

Posted: Thu Jan 14, 2010 11:35 pm
by JeffD
IsaacHayes, you want a subframe as well?

Re: 1990 Beretta GT 3.1 auto PARTS CAR

Posted: Fri Jan 15, 2010 12:57 pm
by JeffD
I have a blue over head console with lights and the mounting bracket for sale. $10
the rear exterior light harness $30
Black in color tilt steering column with turn signal assembly and cruise. $30
a set of decent crosslace 15" wheels with centercaps $75
head lamps that need polishing $10 each
head lamp switch $5
delay wiper switch $5
delay wiper motor $15
electric trunk release $5
weather striping (let me know what section you need I'll pm you a price and availibility.)
GT instrument panel with full gauges $20

send requests and I will let you know if it's available.

Re: 1990 Beretta GT 3.1 auto PARTS CAR

Posted: Fri Jan 15, 2010 12:58 pm
by JeffD
I also have a 1991 saturn sl and a 93 eagle talon es that I am parting out

Re: 1990 Beretta GT 3.1 auto PARTS CAR

Posted: Sun Jan 17, 2010 8:33 pm
by JeffD
Bump!
if you don't like my prices, make an offer. 3500 cylinder heads are available too.

Re: 1990 Beretta GT 3.1 auto PARTS CAR

Posted: Mon Jan 25, 2010 9:30 pm
by JeffD
Luckymc420, I got out the sub frames... they are lighter than I thought, and in decent shape. I torched off the control arms so all there is are little stubs in the rails. let me know what you want to do.