Re: Plastics, shift plate, UPDATED 9/17/12
Posted: Tue Sep 18, 2012 3:12 pm
Email sent.
Beretta.net
Official Chevrolet Beretta Owners Forums
https://beretta.net/forum/
Plastics, shift plate, tail lights, UPDATED 1/5/12
Page 3 of 4
Re: Plastics, shift plate, ECU, UPDATED 9/24/12
Posted: Mon Sep 24, 2012 12:20 pm
updated need an ecu too
Re: Plastics, shift plate, ECU, UPDATED 9/24/12
Posted: Wed Sep 26, 2012 10:20 pm
Good enufffff? lol And don't worry about the trunk button, I can install one! 
Re: Plastics, shift plate, tail lights, UPDATED 12/4/12
Posted: Tue Dec 04, 2012 5:33 am
still need it all and pm sent on that shifter plate, sorry its been awhile
Re: Plastics, shift plate, tail lights, UPDATED 12/4/12
Posted: Tue Dec 04, 2012 2:13 pm
I have euro tails for sale...asking $175 shipped but its negotiable...
Re: Plastics, shift plate, tail lights, UPDATED 12/4/12
Posted: Tue Dec 04, 2012 7:59 pm
pm senttttt
Re: Plastics, shift plate, tail lights, UPDATED 12/4/12
Posted: Thu Dec 06, 2012 5:21 am
i just ordered a new OEM GM left tail, still need a right one, the mint shifter plate and the other stuff, lmk guys
Re: Plastics, shift plate, tail lights, UPDATED 12/4/12
Posted: Thu Dec 06, 2012 2:23 pm
No used light you find will ever compare to the new one you just bought!
I may have a set to part with soon...
I may have a set to part with soon...
Re: Plastics, shift plate, tail lights, UPDATED 12/4/12
Posted: Fri Dec 21, 2012 11:06 am
ALL parts for a 95' auto v6 z26, i need a pic and shipped prices emailed to me at Phel0z@yahoo.com thanx
Some of this may be a long shot but ill try..
1) I need a brand new looking shift plate for an auto v6, has to have all the white writing still on it.
2) Power Window switch cover with good writing as well
3) Plastic piece that covers the crank pulley in the wheel well.
4) MINT NOS passenger taillight
5) MINT black visors ( no floppy ear ect)
6) Light blue Plastic piece or inside door handle (part you put your hand into to shut the door) for a newer door panal (with no screw holes broken)
I have paypal ready to send for any of this stuff..
Some of this may be a long shot but ill try..
1) I need a brand new looking shift plate for an auto v6, has to have all the white writing still on it.
2) Power Window switch cover with good writing as well
3) Plastic piece that covers the crank pulley in the wheel well.
4) MINT NOS passenger taillight
5) MINT black visors ( no floppy ear ect)
6) Light blue Plastic piece or inside door handle (part you put your hand into to shut the door) for a newer door panal (with no screw holes broken)
I have paypal ready to send for any of this stuff..
Re: Plastics, shift plate, tail lights, UPDATED 12/21/12
Posted: Fri Dec 21, 2012 12:21 pm
Email sent.
Re: Plastics, shift plate, tail lights, UPDATED 12/21/12
Posted: Fri Dec 21, 2012 12:37 pm
DanteGTZ i replied, this is the wanted section, not the for sale..
Re: Plastics, shift plate, tail lights, UPDATED 1/5/12
Posted: Sat Jan 05, 2013 6:54 pm
7) 3500 phenolic spacers with all good O-Rings, must be for a 3500 so the ports are big enough..
added
added
Re: Plastics, shift plate, tail lights, UPDATED 1/5/12
Posted: Mon Jan 14, 2013 12:23 pm
Anyone got this stuff?
Re: Plastics, shift plate, tail lights, UPDATED 1/5/12
Posted: Thu Jan 31, 2013 8:36 am
Anyonee.....
Re: Plastics, shift plate, tail lights, UPDATED 1/5/12
Posted: Thu Jan 31, 2013 8:48 am
If you can't find a plate with good writing just get one that's blank and go get some dry transfer lettering used for model building and the spray a layer of clear over it.... This is what we need to start doing with some things to get them back to OEM look since you just wont find many NOS stuff lying around. Especially for these cars.
Or did you get those shown from SCD? I can only assume you either shy'd away from him due to his history or you may still be waiting for the part.
As far as the phenolic spacers, you'll never find any with good o-rings since the groove was set too close to the bore and they all cracked the inside edge off when the o-ring was compressed. Mine were milled down to remove the grooves and I just use two sets of metal 3500 gaskets.
Or did you get those shown from SCD? I can only assume you either shy'd away from him due to his history or you may still be waiting for the part.
As far as the phenolic spacers, you'll never find any with good o-rings since the groove was set too close to the bore and they all cracked the inside edge off when the o-ring was compressed. Mine were milled down to remove the grooves and I just use two sets of metal 3500 gaskets.