Beretta.net

im not gonna lie.. some of that made no sense to me..

jon you have a computer and internet??

I have a pentium 1 and a 33.6K dial up connection... Tehehehe

banzai92gt wrote: jon you have a computer and internet??

lol^^

Well, from this fender race I think you'll win with your lsd and tires.. But I'd almost bet I have more fun with the skating .

LOL i only ask because if you have even a low-end decent internet connection we can set it up so you can remote onto steve's laptop while we are tuning and you can do it/help us...

we will see next bfest??

banzai92gt wrote:LOL i only ask because if you have even a low-end decent internet connection we can set it up so you can remote onto steve's laptop while we are tuning and you can do it/help us...

we will see next bfest??

Have you figured out how to log or pull your .bin file yet? . If you log a few files it'll be easier to see what all needs to be changed.
Bring up things such as STFT (short term fuel trim) LTFT (Long term fuel trim), KR (knock retard), MAF, MAP, ECT.. Just a couple that come to mind. And hopefully your wideband o2 can log as well .

There's a fairly good chance that I'll go to bfest in Denver unless I move for a job..

whats a table modifier??? is it the tiny tuner thing to use?? i just started messing with my powertuner and figured out how to scan and did a run and was very pleased to see that i have no Kr at all and would like to know where to go from there

I wonder where he got the tubing to build the exhaust manifolds?

IIRC it's nothing overly special... It might even be plumbing fittings. I know its a 90* and two T's that's all he did.

Have u cleaned up the engine bay to make it look as nice as the car ??? I hope to make it to bfest and hope this car can be there also

engine bay has been cleaned a bit.. still doing work on the car, heat wrapping headers, new I/C piping and clamps, Tuning...

hoping to send it for paint this winter..

pics!!! or ban lol

wasnt able to send for paint because of my ex fiance... getting it cleaned up for a show in may, gonna finish wrapping the headers, got the new couplers ordered, got a friend to weld me new IC pipes so it doesnt stick out the wheel well.

i plan on ordering HPtuners to tune instead

banzai92gt wrote:i plan on ordering HPtuners to tune instead

Why? They only support a Monte Carlo ECU and you can't use tiny tuners on the bins to access tables they don't have mapped... I highly doubt you've reached the limits of a DHP tuner or think HPtuners will open up anything else that will help you, but that's just my opinion.

cuz i cant figure out how to use DHP!! hahah i need HALP!!

http://www.60degreev6.com/dhp/dhp_powrtuner_manual.pdf

That will help . I read the manual after playing with the tuner on my car.. would have saved hours upon hours if I read how to use it first.