Beretta.net

Ok so I swapped the harness and everything I had to switch to make it work from the 96 Beretta car I have into my 94 Beretta. Now car will not start I have spark I have fuel at the rail but spark plugs are dry. Car will run with dumping gas down the tb until it runs out. I have a inline fuel pump on a switch so fuel pump is running. I am lost and stumped. Anybody have any ideas of what's going on? I know its a injector issue but don't know why both cars ran before the swap also. Help please and thanks.

Most likly going to have to post pics of the plugs your talking about, when i did my swap i was left over with a couple plugs but i did and obd1.5 to obd2

That's what I am doing also sorry I may have worded it wrong I did get the one undo on the drivers firewall. Now just need help how to wire the com port I think its called to my 94 harness inside the car so I can tune.