Attention All Beretta Owners!
Posted: Tue Nov 14, 2006 1:23 am
I would like to take this time to say hi to everyone on Beretta.net
I have produced a EGR Block-off Kit for your Beretta!  Most people ask what does an EGR Valve do?  A EGR Valve recirculates your hot exhaust gases which decrease power causing some internal components to wear alot sooner than expected...
How do I install the EGR Block-Off Kit?
-  The answer is simple...  Remove the EGR Valve from your exhaust manifold, remove the gasket and clean the surface area up where the gasket was.  Next spread and even amount of gasket sealer on the gasket I provide with the block-off plate.  Allign the gasket in its proper position, next place it where the old gasket used to be. Now... place the block-off plate over the gasket, place your EGR Valve back on and secure the screws to the recommended torque. ÂÂÂ
This will give your car an additional 2 to 5 HP increase.  By not recirculating the hot exhaust gases this allows your car to run cooler thus producing better HP results...  This technology has been around in the mitsubishi market for years and was available through Concept Illusions whom is now CI Motorsports... ÂÂÂ
**  Of course proper maintenance schedules can also increase your HP as well.
For those who are intrested please e-mail me at s_kuzma83@hotmail.com, And for those who are wondering, yes I do use this myself and wouldn't try it if it didn't work...  All proceeds goto "PROJECT FLORIDA ORANGE".
"PROJECT FLORIDA ORANGE" is a 1995 Chevorlet Beretta Z26 which is under devlopment...  I am considering anyones input on what makes a good car and what you use on your car.  Along the way I will choose someones suggestion to integrate with the project.  When the project is finished you will be acknowledged as part of the cars design.
EGR Block-Off Kit "Block-Off Plate and Gasket w/ instructions" $7.95 + $3.95 Shipping ** available for Z26 Models w/ a 3100 ** Other models in development currently!
I have produced a EGR Block-off Kit for your Beretta!  Most people ask what does an EGR Valve do?  A EGR Valve recirculates your hot exhaust gases which decrease power causing some internal components to wear alot sooner than expected...
How do I install the EGR Block-Off Kit?
-  The answer is simple...  Remove the EGR Valve from your exhaust manifold, remove the gasket and clean the surface area up where the gasket was.  Next spread and even amount of gasket sealer on the gasket I provide with the block-off plate.  Allign the gasket in its proper position, next place it where the old gasket used to be. Now... place the block-off plate over the gasket, place your EGR Valve back on and secure the screws to the recommended torque. ÂÂÂ
This will give your car an additional 2 to 5 HP increase.  By not recirculating the hot exhaust gases this allows your car to run cooler thus producing better HP results...  This technology has been around in the mitsubishi market for years and was available through Concept Illusions whom is now CI Motorsports... ÂÂÂ
**  Of course proper maintenance schedules can also increase your HP as well.
For those who are intrested please e-mail me at s_kuzma83@hotmail.com, And for those who are wondering, yes I do use this myself and wouldn't try it if it didn't work...  All proceeds goto "PROJECT FLORIDA ORANGE".
"PROJECT FLORIDA ORANGE" is a 1995 Chevorlet Beretta Z26 which is under devlopment...  I am considering anyones input on what makes a good car and what you use on your car.  Along the way I will choose someones suggestion to integrate with the project.  When the project is finished you will be acknowledged as part of the cars design.
EGR Block-Off Kit "Block-Off Plate and Gasket w/ instructions" $7.95 + $3.95 Shipping ** available for Z26 Models w/ a 3100 ** Other models in development currently!