Beretta.net

Like the title says, I'm looking for a complete mount setup from a 92 or 93 3.1 5spd.

Must include the aluminum bracket that bolts to the engine bracket, and the mount housing that bolts to the car itself (in front of the strut tower).

Shipping to 28110.

Bump....

None at the Pick & Pull today, and I checked out that yard near the race track... they don't have crap there.

Hence the topic... I'll probably check the one down in Rock Hill, maybe tomorrow.

I'll check locally for you, but 5 speed Beretta (any year) is slim to none currently.  It'll be a week.

TTT... haven't had any luck yet. I know some of you people go to the yard just for the hell of it... take a look under some hoods and help a brotha out!  

I tried looking, came up with NOTHING.  People are too lazy around here to have a 5 speed anything.  

I haven't found any yet Geoff.
Going 'yard hopping tomorrow.

Thanks, lemme know!

So let me ask this... is the motor mount set further back to correct your engine tilt that you have going on to correct  your axle alignment?

I honestly can't tell you where everything sits.. hence the reason I need a mount for comparison reasons.

If my thinking is correct, the mount is probably in the same position as the automatic mount. It's just the aluminum bracket that is different... the "insert" part that goes into the mount is closer to the front of the car, which in turn puts the drivetrain farther back in the engine bay.

Worse comes to worse, I'll design a new aluminum bracket to replace the one that is in there. I need to get a T first... I've got some hi-res image scans of one that Isaac Hayes sent me, but I can't figure out how to import those into AutoCad 04 for the life of me.

Talk to bzopi, I made the scans for him originally. He made a 3D file from it.