**SOLD**Comp Cams Magnum Steel Roller Tip 1.6 Rockers
Posted: Wed Aug 20, 2014 3:54 pm
As the title says, I'm selling 8 rockers with all the accessories minus the studs required to mount them depending on your application. What you see in this pic is what you will get:
They are not self-aligning so you will need guideplates. They bolt on to our Beretta Ln2s easily as long as you buy this:
http://www.summitracing.com/parts/ARP-100-7201
Any Cavalier/Sunfire 98+ will need different studs and retrofitted guide plates for this to work (on a side note, some 98 2200s came with the M10x1.5 holes so it's on you to check what you have). The studs you need are here:
http://www.summitracing.com/parts/arp-134-7201
I also highly advise that you get a new set of pushrods when you install these which will run you around 12-15 bucks via rockauto for 8.
Price is just $65 shipped anywhere in the U.S. and slightly more for Canada (if you're from Canada and are interested in them, let me know and I can look up a quote on that shipping)
I'm also located in Aurora IL if you want local pickup. Thanks for looking!
They are not self-aligning so you will need guideplates. They bolt on to our Beretta Ln2s easily as long as you buy this:
http://www.summitracing.com/parts/ARP-100-7201
Any Cavalier/Sunfire 98+ will need different studs and retrofitted guide plates for this to work (on a side note, some 98 2200s came with the M10x1.5 holes so it's on you to check what you have). The studs you need are here:
http://www.summitracing.com/parts/arp-134-7201
I also highly advise that you get a new set of pushrods when you install these which will run you around 12-15 bucks via rockauto for 8.
Price is just $65 shipped anywhere in the U.S. and slightly more for Canada (if you're from Canada and are interested in them, let me know and I can look up a quote on that shipping)
I'm also located in Aurora IL if you want local pickup. Thanks for looking!