Beretta.net

Ok, I'm looking for a nice set of subframes to start, and one right side control arm. I need all 4 of the control arm bolts to be in good condition as well, nothing cut. Don't need the sway bar or brackets.

Also looking for some rear corner marker lights that are not cracked.

PM me or reply if you have any of the above, I pay quick.

Rear corner markers? You mean the side markers?? Those ones are red, right? I might have them...

Yes, the red bumper markers lights. Still technically the corner of the car

Will cavalier subframes and control arms suffice?have both and the are in good shape just need sanding ill pm you my number since im not on here too much

are you looking for 95,96 subframes or do you prefer the 94 and earlier style?

I want 94-96 it was 93 and older had the two horizontal bushings, and alpine iirc the cavi ones are not the same design.

I have the set of the 92's on red that I could go to but I want to try the cavi bushings in the 94+ setup

cavlaier ones did not have the horizontal bushings it was berettas and grand ams iirc, ill try to find a pic i know that a grand am guy used the cavlaier ones 94 and down cause he did not want the spherical bushings

these are the 94 and down cavalier a arms http://www.google.com/imgres?imgurl=htt ... x=95&ty=46

Yes that's the same as the 93 and older beretta. As noted in want the 94+ setup. I have a 92 setup in the driveway in my red car and i don't want to use those again.

Still need rear markers, I believe I still have a decent set available. Can even convert em' first if you want. LOL

Ryan hasn't gotten back to me yet so yeah I do. I don't need them led tho... because then I would have to do the front too.

Well hey, that's no problem. I even have spares for the front. Actually I have a full set of nice markers, just need to convert them and you would be all set. LMAO


Anyways, either way, let me know. I guess for these, hmmmm.... 15 bucks shipped USPS? (10 for the markers, 5 for shipping)


Or I can just build you the whole conversion for.... 75 + 20 for the 4 markers I have, shipped, so $95. Now if you were to ship me back yours once installed, then no charge for the markers, providing your's had no broken lenses, the housings (white or black part) I don't care about though.

And for an extra 20, you can get the nice plug-in connectors to make life easier. (I have to charge for those, they are a pain to make...)

Oh!

PP is dtmace@msn.com

I'll stick with just stock, you do know 96 has a different marker out front right? they are a different bulb and twist lock IIRC.

But yeah if you want to sell just the rears then 15 is good.

And if I were to do the conversion, you would have only got good fronts out of me, hence the need for rears, I noticed they were cracked when I was bleeding the brakes.

I do remember that, someone sent me a set or I picked up a set of 96 year someplace. The socket was a bit larger or smaller, something like that. With the conversion though, it really doesn't matter, the back housing is removed from the lens in the process, and a pigtail is made. The socket I make may not fit the 96 fronts, I don't have a pigtail for those to test and see!

Most simply use a couple of latch locks to connect them, that way the change can be reverted, or the lights kept if selling the car, etc. The sockets just make it easier. Hell I soldered mine! But my pigtails were corroded to trash, so no real loss there. I can still remove my bumpers without removing the lights, since the rebuild makes them thinner, they just slide right through the holes in the bumper for them. No problem.

Anyways, no problem, just hit me with a PP and I will try to get them out today or tomorrow!

From Sylvania's website, they are a 24 bulb

Front sidemarker
24
24LL SYLVANIA Long Life miniature bulbs perform twice as long as any standard miniature bulb. Designed for durability, lower maintenance and greater safety.