Beretta.net

Anybody know where to get an aftermarket ECU for a 94 Beretta? speeed limiter is killing me!

look into bigstuff3, haltec, motec or you can look into upgrading your car to OBD II and usijng a tuner.

thanks wicked looking into it

also is it even possible to convert to obd II from OBD I.5

Yes,  and  it  has been  done.

any information on the procedure?from obd 1.2 to 2. would it just require the newer ECU and rewiring the system?

If i remember it right, here's what you'll have to change..

1) PCM
2) ABS Computer
3) Engine wiring harness, add MAF sensor
4) Instrument cluster

Not 100% sure about this computer but I have heard only spectacular things about an ECU called the megasquirt.  If all you're doing, however, is removing a rev limiter ... uhm, there must be an easier way.

I personally will be running the Holley 950 Multiport ECU. it's around $550 from summitracing.com. Comes with software, and all thats involved is some pin swapping to make things function, and of course tuning, there's no base map either unfortunately

over on the bstuff.com forum there are some threads on swapping from OBD1.5 to OBD 2 that aren't but a few weeks old.
click here,

here,

and here