Page 1 of 1
3800sc top end
Posted: Sun Mar 23, 2008 3:03 pm
by will3387
i was just wondering if the 3400 top end with the sc would work right on my 3.1. i know that the 3400 top end alone will fit but with the sc will it be any different.
3800sc top end
Posted: Sun Mar 23, 2008 3:13 pm
by bonecrrusher
Yes the L67 heads, cam, lower intake, and upper intake all bolt on to your 3.1 block.
3800sc top end
Posted: Sun Mar 23, 2008 5:40 pm
by Asylum
(will3387 @ Mar. 23 2008,16:03)QUOTEi was just wondering if the 3800sc top end would work right on my 3.1. i know that the 3800 top end alone will fit but with the sc will it be any different.
Then you don't know much at all!
They are not even the same engine family!
3800sc top end
Posted: Sun Mar 23, 2008 5:55 pm
by 99GaGT3X00
enlighten me how do you know the 3.8 sc top end will fit
3800sc top end
Posted: Sun Mar 23, 2008 8:38 pm
by will3387
sorry i ment to put 3400. at the time i was posting that i was thinking of the 3800sc
3800sc top end
Posted: Sun Mar 23, 2008 9:14 pm
by 99GaGT3X00
well then in that case yes you can put the 3400 top end on the 3100
3800sc top end
Posted: Mon Mar 24, 2008 10:40 am
by Asylum
With all the work involved in swapping a 3400 top end onto a 3100, you would really have a hard time convincing me it is worth it over a complete low mileage 3400 complete swap.
For the most part 3400's are plentiful in most areas (
www.car-parts.com) and it might even end up being less expensive.