Beretta.net

ok all,
Have decided to pull the 2.2 out of the retta.  And was wanting to put a Quad 4 motor in it.  I would like for it to have a Quad 4 H.O. with a 5-speed but mine is only a 4-speed auto so thats just some more work to be done to convert it over.  So If anybody knows what year model or where i can get a Quad 4 motor let me know, And please let me know if this can be done!
P.S.- Mine is a 96 Beretta.

Seems much of work if you want to swap a Quad4 in your car.. i think the best way ist that you look around and buy a good Quad4 GTZ. But if you find a GTZ with a bad body or something and the trans and the engine is good then you can do a swap..

I have a list from quad4forum.com with all Quad4 engine cars. But you need to look at the HO's, if you take a car with the LO Quad4 then you need the head and cams and all that stuff to change it to an HO. So the best thing is you get a HO Quad4

List:
1988-1995 Buick Skylark
1988-1989 - 2.3L Quad 4 DOHC (LD2) 150HP Model: Custom, Limited
1990 - 2.3L Quad 4 DOHC (LD2) 160HP Model: Custom, Gran Sport
1991 - 2.3L Quad 4 DOHC (LD2) 160HP Model: Custom, Gran Sport, Luxury Edition
1992 - 2.3L Quad 4 OHC (L40) 120HP Model: Base
1993-1994 - 2.3L Quad 4 OHC (L40) 115HP Model: Custom, Limited
1995 - 2.3L Quad 4 DOHC (LD2) 150HP Model: Custom, Limited

1990-1994 Chevrolet Beretta
1990-1992 - 2.3L Quad 4 DOHC (LGO) 180hp Model: GTZ
1993 - 2.3L Quad 4 DOHC (LGO) 175hp Model: GTZ
1994 - 2.3L Quad 4 DOHC (LGO) 170HP Model: Z26

1995 Chevrolet Cavalier
1995 - 2.3L Quad 4 DOHC (LD2) 150HP Model: Z24

1992-1995 Oldsmobile Achieva
1992 - 2.3L Quad 4 OHC (L40) 120HP Model: S
1992 - 2.3L Quad 4 DOHC (LD2) 160HP Model: S, SL
1992 - 2.3L Quad 4 DOHC (LGO) 180HP Model: SC
1992 - 2.3L Quad 4 DOHC (W41) 190HP Model: SCX
1993 - 2.3L Quad 4 DOHC (LD2) 155HP Model: S, SL
1993 - 2.3L Quad 4 DOHC (LGO) 175HP Model: SC
1993 - 2.3L Quad 4 DOHC (W41) 185HP Model: SCX
1993-1994 - 2.3L Quad 4 OHC (L40) 115HP Model: S
1994 - 2.3L Quad 4 DOHC (LD2) 155HP Model: S, SC
1994 - 2.3L Quad 4 DOHC (LGO) 175HP Model: SC
1995 - 2.3L Quad 4 DOHC (LD2) 150HP Model: S SERIES I & II

1988-1991 Oldsmobile Calais
1988-1989 - 2.3L Quad 4 DOHC (LD2) 150HP Model: International, SL
1990-1991 - 2.3L Quad 4 DOHC (LD2) 160HP Model: International, S, SL
1989-1991 - 2.3L Quad 4 DOHC (LGO) 180hp Model: International, S, 442
1991 - 2.3L Quad 4 DOHC (W41) 190hp Model: 442 W41

1990-1991 Oldsmobile Cutlass Supreme
1990 - 2.3L Quad 4 DOHC (LGO) 180HP Model: International
1990 - 2.3L Quad 4 DOHC (LD2) 160HP Model: Base
1991 - 2.3L Quad 4 DOHC (LD2) 160HP Model: Base

1988-1995 Pontiac Grand AM
1988-1989 - 2.3L Quad 4 DOHC (LD2) 150HP Model: SE, LE
1990 - 2.3L Quad 4 DOHC (LD2) 160HP Model: SE, LE
1989-1990 - 2.3L Quad 4 DOHC (LGO) 180HP Model: SE
1991 - 2.3L Quad 4 DOHC (LD2) 160HP Model: LE
1991 - 2.3L Quad 4 DOHC (LGO) 180HP Model: SE, LE
1992 - 2.3L Quad 4 DOHC (LGO) 180HP Model: GT
1992 - 2.3L Quad 4 OHC (L40) 120HP Model: SE
1992 - 2.3L Quad 4 DOHC (LD2) 160HP Model: SE, GT
1993 - 2.3L Quad 4 DOHC (LD2) 155HP Model: SE, GT
1993-1994 - 2.3L Quad 4 OHC (L40) 115HP Model: SE
1993-1994 - 2.3L Quad 4 DOHC (LGO) 175HP Model: GT
1994 - 2.3L Quad 4 DOHC (LD2) 150HP Model: SE, GT
1995 - 2.3L Quad 4 DOHC (LD2) 150HP Model: SE, GT

1990-1991 Pontiac Grand Prix
1990 - 2.3L Quad 4 DOHC (LD2) 160HP Model: LE
1991 - 2.3L Quad 4 DOHC (LD2) 160HP Model: LE, SE

1995 Pontiac Sunfire
1995 - 2.3L Quad 4 DOHC (LD2) 150HP Model: GT

So you want to put a Quad and a 5 speed into an OBD-2 '96 Beretta.

That is going to take some doing!

Get onto the Quad Forums and ask alot of questions.

I can, and has been done on OBD-2 cars.

Good luck with it.

A bit off topic. Eric, I was noting your sig. Is it supposed to read "Where we're not happy until you're happy" or like it is "you're not happy"? ROFL. I wonder if I'm the first to notice that.......

LMAO on the were not happy until youre not happy!

you will have to swap out the entire subframe (and all that is attached to it) /struts/wiring harness/ECM

It can be done though, just need to find the right parts.

I would just rip EVERYTHING off the front of the beretta fenders and everything and just have the unibody up there... then start to transfer everything over, this would be the cleanest/best way to do it.  Probably could save some time too since everything will be easier to access without anything on the front.

I agree with the just buy a GTZ/Z26 Quad.  

(SuzukiGhostRider @ Apr. 29 2008,00:36)QUOTEA bit off topic. Eric, I was noting your sig. Is it supposed to read "Where we're not happy until you're happy" or like it is "you're not happy"? ROFL. I wonder if I'm the first to notice that.......
It's correct! And we do our best to make sure it happens.

Wow thats more work then i thought it would be.  Maybe i'll just get a 3100 out of another Z26.

If anybody wants to see y I want a quad 4 in my car head over to mantapart.com and take a look at the supercharger for it.  Makes 300 hp to the ground! with the right parts in it. tear up some Hondas   (LOL)

mantapart is not someone you want to deal with.  They have never kept someones money permanently but pretty close to it.

from what i understand here, you want to take a quad 2.3 and put it in your car? youd be better off selling your ride and buying a gtz with a quad.... honestly, thats your best bet bro.

Wanna swap the 2.2 for a 94 quad Z26?

Not to crap all over your idea Z26, but seriously, that's a CRAPLOAD of work. You're better off swapping to a 3400 or buying a Quad car. GL bud.