Page 1 of 1
question for turbo-s/c guys
Posted: Sun Mar 18, 2007 5:26 pm
by ndianabones
1995 beretta z26 3400 swap. wanting to go turbo.going nitrous for the moment. i have read that a L31 truck 5.7 vortec pump@63psi, cyclone/typoon pump have been used in berettas. curious what most of the turbo-s/c guys are using. were they get them from,part# ,volume-gph/lph.
question for turbo-s/c guys
Posted: Sun Mar 18, 2007 7:08 pm
by rweatherford
I would not doubt that it is possible. Norm used a Walbro, I had a stock pump, but was probably about to run out of flow.
Sorry I can't be of more help.
question for turbo-s/c guys
Posted: Sun Mar 18, 2007 11:22 pm
by Cliff8928
I have a L31 pump in mine, but that was for more of convenience rather than performance. The fuel pressure only runs at what the regulator is set to as well. The L31 trucks do run in excess of 60 psi.
question for turbo-s/c guys
Posted: Thu Mar 22, 2007 7:52 pm
by wicked-irocz
I ran out of pump and now have a Walbro 190.
I bought it here
http://www.autoperformanceengineering.com/
question for turbo-s/c guys
Posted: Fri Nov 09, 2007 12:44 am
by fastlane02
auromotive 800+ pump but i dont think you need that