Page 1 of 1
Black Plastic , dual horizontal panels between tail lights
Posted: Wed Jul 04, 2012 4:03 pm
by 88 Brrrr
Hi, I have an 88 Beretta Base , 2.0 , 5sp. I need to find the two Black Plastic , dual horizontal panels between tail lights. They are 34" x 4" each. Sorry don't know their part name. I'm in South Jersey, don't mind paying resonable shipping. Any leads appreciated ! THANKS !!
Re: Black Plastic , dual horizontal panels between tail ligh
Posted: Thu Jul 05, 2012 12:31 pm
by snowblindburd
They're called filler panels. It sounds like you want the 94-96 style. There is a "Wanted" section that this will probably be moved to. I'm sure you'll get some hits there. For now, browse the "For Sale" section or hit up your local junkyard!
Re: Black Plastic , dual horizontal panels between tail ligh
Posted: Thu Jul 05, 2012 12:57 pm
by 1990BerettaGTZ2.3L
Ya your looking at the 94-96 style I can get you a pair probably this Saturday if I can make it to the junkyardhow much you willing to pay so I don't pay too much for nothing
Re: Black Plastic , dual horizontal panels between tail ligh
Posted: Thu Jul 05, 2012 3:59 pm
by Styluss
I have a set of the clear fillers, the style that is currently on your car if you want them.
Re: Black Plastic , dual horizontal panels between tail ligh
Posted: Thu Jul 05, 2012 5:03 pm
by 88 Brrrr
Hi Styluss, Are they near perfect and what are you asking for the pair ? Any idea of shipping charges ?
Re: Black Plastic , dual horizontal panels between tail ligh
Posted: Fri Jul 06, 2012 2:28 pm
by Styluss
Please see here:
http://www.beretta.net/forum/viewtopic.php?f=13&t=8374
They are listed as sold but that fell through so they are up for grabs.
Re: Black Plastic , dual horizontal panels between tail ligh
Posted: Fri Jul 06, 2012 3:06 pm
by 88 Brrrr
Styluss, Ok....I looked at them . Mine on the '88 Base' seem to be 2 panels separated by the red stripe and word Berretta. Both panels 34 x 4 inches. I'm a little confused by the 3 pcs pictured on your post. Will yours replace mine ??
Re: Black Plastic , dual horizontal panels between tail ligh
Posted: Fri Jul 06, 2012 3:11 pm
by 3X00-Modified
Yes all of those are the same "shape" the only difference is when they changed from "clear smoke" to just black panels. The panel itself as you can see the lower incorporates the separating line and the Beretta words, and just the top one is the individual "panel" part as your calling it.
His three photos are showing the two panels as you would get them and then the scratches around the keyhole, and probably the lack of scratches on the straight panel.