The Derretta, 1994 base with some attitude.
- whiteretta
- Registered User
- Posts: 760
- Joined: Mon Jan 31, 2011 2:40 pm
- Location: New Carlisle, Ohio
- Contact:
Re: RE: Re: The Derretta, 1994 base with some attitude.
I have one, I just like the black egg crates more without them. But thankyou!Asylum wrote:BTW if you don't have the correct Bowtie for that grill, I have one you can have.
Black with a red outline. California Mint.
Would be perfect with the stripes.
Let me know if you need it.
Cheers.
Sent from my VS501 using Tapatalk
- 3X00-Modified
- Administrator
- Posts: 10912
- Joined: Thu Jul 05, 2007 9:18 am
- Location: Brooklyn CT
Re: The Derretta, 1994 base with some attitude.
I'll work on getting the pics updated... But that may have been a link to one that I never saved on someone else's server.
Nice to see you around again Eric B...
Nice to see you around again Eric B...
- whiteretta
- Registered User
- Posts: 760
- Joined: Mon Jan 31, 2011 2:40 pm
- Location: New Carlisle, Ohio
- Contact:
Re: The Derretta, 1994 base with some attitude.
Rear axle is primered!
Sent from my VS501 using Tapatalk
Sent from my VS501 using Tapatalk
- whiteretta
- Registered User
- Posts: 760
- Joined: Mon Jan 31, 2011 2:40 pm
- Location: New Carlisle, Ohio
- Contact:
Re: The Derretta, 1994 base with some attitude.
In case anybody would like a visual comparison, SRT vs. base Neon rear rotor thickness.
Sent from my VS501 using Tapatalk
Sent from my VS501 using Tapatalk
- whiteretta
- Registered User
- Posts: 760
- Joined: Mon Jan 31, 2011 2:40 pm
- Location: New Carlisle, Ohio
- Contact:
Re: The Derretta, 1994 base with some attitude.
So much better with the red air filter!
Sent from my VS501 using Tapatalk
Sent from my VS501 using Tapatalk
- 3X00-Modified
- Administrator
- Posts: 10912
- Joined: Thu Jul 05, 2007 9:18 am
- Location: Brooklyn CT
Re: The Derretta, 1994 base with some attitude.
Careful with that one... Adding that much rotor thickness may mean you need to space the bearing out even further for the rotor to clear the bracket and backing plate... I'm already struggling with how much you need to push it out for a base version rotor and that results in tires rubbing the rear quarter lip.whiteretta wrote:In case anybody would like a visual comparison, SRT vs. base Neon rear rotor thickness.
Sent from my VS501 using Tapatalk
- whiteretta
- Registered User
- Posts: 760
- Joined: Mon Jan 31, 2011 2:40 pm
- Location: New Carlisle, Ohio
- Contact:
Re: RE: Re: The Derretta, 1994 base with some attitude.
Good to know, that being the case, when I order my rotors I'll stick with the base rotors.3X00-Modified wrote:Careful with that one... Adding that much rotor thickness may mean you need to space the bearing out even further for the rotor to clear the bracket and backing plate... I'm already struggling with how much you need to push it out for a base version rotor and that results in tires rubbing the rear quarter lip.whiteretta wrote:In case anybody would like a visual comparison, SRT vs. base Neon rear rotor thickness.
[img]https://uploads.tapatalk-cdn.com/201802 ... d08d46.jpg[/img]
Sent from my VS501 using Tapatalk
Sent from my VS501 using Tapatalk
- whiteretta
- Registered User
- Posts: 760
- Joined: Mon Jan 31, 2011 2:40 pm
- Location: New Carlisle, Ohio
- Contact:
- whiteretta
- Registered User
- Posts: 760
- Joined: Mon Jan 31, 2011 2:40 pm
- Location: New Carlisle, Ohio
- Contact:
Re: The Derretta, 1994 base with some attitude.
Moog bushings installed, ABS wiring has been ran!
Sent from my VS501 using Tapatalk
Sent from my VS501 using Tapatalk
- whiteretta
- Registered User
- Posts: 760
- Joined: Mon Jan 31, 2011 2:40 pm
- Location: New Carlisle, Ohio
- Contact:
Re: The Derretta, 1994 base with some attitude.
Test fit! One down, one to go...
Sent from my VS501 using Tapatalk
Sent from my VS501 using Tapatalk
- whiteretta
- Registered User
- Posts: 760
- Joined: Mon Jan 31, 2011 2:40 pm
- Location: New Carlisle, Ohio
- Contact:
Re: The Derretta, 1994 base with some attitude.
It may looked hacked up, but it fit perfect on the test fit. Non cut, vs cut knuckle.
Sent from my VS501 using Tapatalk
Sent from my VS501 using Tapatalk
- 3X00-Modified
- Administrator
- Posts: 10912
- Joined: Thu Jul 05, 2007 9:18 am
- Location: Brooklyn CT
Re: The Derretta, 1994 base with some attitude.
Well then... That's one way to do it... Hopefully you got it centered properly.
- whiteretta
- Registered User
- Posts: 760
- Joined: Mon Jan 31, 2011 2:40 pm
- Location: New Carlisle, Ohio
- Contact:
Re: RE: Re: The Derretta, 1994 base with some attitude.
Already did the test fit, lined up great!3X00-Modified wrote:Well then... That's one way to do it... Hopefully you got it centered properly.
Sent from my VS501 using Tapatalk
- whiteretta
- Registered User
- Posts: 760
- Joined: Mon Jan 31, 2011 2:40 pm
- Location: New Carlisle, Ohio
- Contact:
Re: The Derretta, 1994 base with some attitude.
Test fit the second bracket, and painted my new calipers. She's getting closer...
Sent from my VS501 using Tapatalk
Sent from my VS501 using Tapatalk
- whiteretta
- Registered User
- Posts: 760
- Joined: Mon Jan 31, 2011 2:40 pm
- Location: New Carlisle, Ohio
- Contact:
Re: The Derretta, 1994 base with some attitude.
I've got junk in the trunk!
I did finally tear off that old rear axle. This is why I haven't been driving it...
Sent from my VS501 using Tapatalk
I did finally tear off that old rear axle. This is why I haven't been driving it...
Sent from my VS501 using Tapatalk