tail lights and assembly with black center fillers

jjanke · Post by **jjanke** » Fri Apr 12, 2013 9:15 pm

im looking for the entire tail light assembly with solid black center fillers and both tail lamps with bulbs and wires to the connector harness. Please let me know if this stuff is available as soon as possible. thanks

DTMAce · Post by **DTMAce** » Fri Apr 12, 2013 9:26 pm

If you aren't picky about condition, I have some used stuff available. The set on my black base is intact and useable. Picky meaning it they have a few flaws, but nothing serious. Clean and polish and they would look really good.

jjanke · Post by **jjanke** » Fri Apr 12, 2013 9:37 pm

would defiantly be interested!!!!!! Do you have any pics????? (the more detailed the better) Where are you located??? and how much were you looking to get for the entire assembly meaning the 2 lamps, 2 center black fillers and the trim piece that the lamps sit on, and the wire harness with bulbs. THANKS

DTMAce · Post by **DTMAce** » Sat Apr 13, 2013 1:03 am

What color Beretta do you have? I have a Black, Aqua, and Red lower filler support panel. The tail lights are in great shape, just have some minor scuffs and both have a slight center crack I think. Typical though. Lower and upper fillers are fine.

Pics? Here is the most recent shot from on bnet:

My facebook page has some later ones from last June. Will try to get you a pic later.

If I can round up a few boxes for the stuff, hell I don't know. $150 for all of it shipped? Harness too right? Can't remember if that unplugs, or if Im going to have to cut or remove it from a lot further under the carpet or something.. Let me know.

jjanke · Post by **jjanke** » Sat Apr 13, 2013 10:26 am

thanks for the quick response. I am defiantly interested I believe the harness unplugs from under the drivers side under the rear facia........If i can choose a color for the support housing the black one will work then I wont even have to paint it. I also realized i need the rubber weather stripping that runs behind the top of the top filler.... Basically every part needed to return the "taillights" to a stock look. At 150$ that sounds like a really fair price for all that. Im just a little worried about shipping cost........ but really have no choice..... Im living just a little north of Detroit MI.....Wher are you from.

DTMAce · Post by **DTMAce** » Sat Apr 13, 2013 10:32 am

That price includes shipping (as I said above). And I live above you in the upper peninsula here in Michigan. heh So it shouldn't be bad, and even via UPS ground it will probably be a next day delivery.

Pulling the harness should be fun. What is wrong with the one you have?

jjanke · Post by **jjanke** » Sat Apr 13, 2013 1:30 pm

I Turned my stock lights into corvette lights and ended up cutting off all the extra bulbs and wires

.......I want to return to the stock look but everything was so modified I just need all new assembly. The wire harness to the clip/plug will defiantly help me alot...... it should't be too hard to get at from what i remember...might even be able to un plug w/o removing the bumper i think???????....but it was years ago. How would u prefer to handle payment?????

jjanke · Post by **jjanke** » Sat Apr 13, 2013 1:31 pm

Do you happen to have a deck lid spoiler too????

DTMAce · Post by **DTMAce** » Sat Apr 13, 2013 1:54 pm

Yes, I have a deck lid spoiler too. Black even.

DTMAce · Post by **DTMAce** » Sat Apr 13, 2013 2:03 pm

Tell you what. We can do this:

2 tail lights left and right
Upper and lower fillers
Lower filler support
as much of the rear harness as I can provide you.
decklid spoiler. I may have a decent light for it, not sure. One that was in it was broken.

All those items, shipped, for 200. Sound good? Paypal is dtmace@msn.com

I already have items that I will be pulling off of the car anyway next week for another member who has been very patiently waiting.

Let me know.

jjanke · Post by **jjanke** » Sat Apr 13, 2013 3:48 pm

sounds great I sent you a PM. I was also interested in seeing a pic of the spoiler if you had one. just wanna be sure of what style it is......cause i know there is a few different ones .....and i know there is one style i dont like

DTMAce · Post by **DTMAce** » Sat Apr 13, 2013 6:36 pm

Its the Z26/GTZ style, biggest one made. The others are smaller. This one is flatter and wider and sticks out over the sides a tiny bit. Here is the pic of it as it used to be on the base. (I had removed it later on)

Let me know..

Edit:

Biggest production spoiler by GM ever made for these cars. The vert spoiler was about the same, but had leading tips from the back of the vert top, etc. Those were only made for the Indy vert models.

DTMAce · Post by **DTMAce** » Sat Apr 13, 2013 6:39 pm

Another pic before it was removed.

DTMAce · Post by **DTMAce** » Sat Apr 13, 2013 9:45 pm

And its done. Looks like Monday I will be tearing a lot of parts off the car(s). (MPB, you will be getting yours soon as well. Will PM you later.)

Thanks J... Will notify you once its packed and shipped Probably will be 3 or 4 boxes. Going to combine the long stuff in one box, ship the lights as well packed as I can to prevent the standoffs being broken.

jjanke · Post by **jjanke** » Sat Apr 13, 2013 9:56 pm

thanks again

I will let u know if there's anything else i may need

Beretta.net

tail lights and assembly with black center fillers

tail lights and assembly with black center fillers

Re: tail lights and assembly with black center fillers

Re: tail lights and assembly with black center fillers

Re: tail lights and assembly with black center fillers

Re: tail lights and assembly with black center fillers

Re: tail lights and assembly with black center fillers

Re: tail lights and assembly with black center fillers

Re: tail lights and assembly with black center fillers

Re: tail lights and assembly with black center fillers

Re: tail lights and assembly with black center fillers

Re: tail lights and assembly with black center fillers

Re: tail lights and assembly with black center fillers

Re: tail lights and assembly with black center fillers

Re: tail lights and assembly with black center fillers

Re: tail lights and assembly with black center fillers

Connect with your social network account