Starting problem

BerettaMN · Post by **BerettaMN** » Sun Jun 24, 2012 8:51 pm

Are you getting spark when it's cranking?

DownSouth · Post by **DownSouth** » Thu Jul 05, 2012 10:01 am

BerettaMN wrote:Are you getting spark when it's cranking?

No spark

Post by **3X00-Modified** » Thu Jul 05, 2012 10:08 am

Move to the ICM or ohm out the coils to make sure they are not bad.

Also check the wire that feeds the crank sensor to the ICM... that may have been damaged somehow.

DownSouth · Post by **DownSouth** » Sat Jul 07, 2012 9:04 am

Problems solved. The starting problem (see post 1) was the ignition switch (http://www.autozone.com/autozone/parts/ ... zl6nZ9n859) and the second problem was the ICM. All is good now. Thanks for the input.

LisaMartinez · Post by **LisaMartinez** » Thu Mar 05, 2020 12:49 am

I'm having the same problems

LisaMartinez · Post by **LisaMartinez** » Thu Mar 05, 2020 12:54 am

Yes even with an inline spark tester

LisaMartinez · Post by **LisaMartinez** » Mon May 25, 2020 12:43 pm

Yes I'm getting good spark even with the inline tester

Beretta.net

Starting problem

Re: Starting problem

Re: Starting problem

Re: Starting problem

Re: Starting problem

Re: Starting problem

Re: Starting problem

Re: Starting problem

Connect with your social network account