issue
- pontiac3100
- Registered User
- Posts: 19
- Joined: Sun Apr 22, 2007 8:39 pm
- Location: chi-town
issue
whats up hopefully yall can help me.
i have a 1994 pontiac grand am gt 3100 4spd auto
w/ 168k miles on her.
i did a tuneup ehh a while back...well two tune ups.
used regular delco's and they went bad...found out i'm supposed to use platium.
well i did'nt have enough money for the platium so i bought rapid fires.
now here's what happens
when you take off around 10-20mph the engine bogs.
a few times it bogged so bad that it sound like the engine was gonna die out.
and inorder for me to get her moving i had to play with the gas till i reached abouve 20mph.
that was solved by replaceing the pcm.
now the one i have is from a 95 grand am with the sport package....but i don't feel comfortable with it unless it's a gt....and i seen one at the j/y.
now whats happens when the engine is cold she misfires and bogs.
once she's in closed loop she.....
it's kinda hard to describe.
i'm assuming it's bogging, because when she reaches high rpms (4500-6200rpms) i can hear like a popping from my cold air intake.
But also followed by a rich exhaust smell.
i removed two of the front sparkplugs and they had some crap on them(assuming it's carbon build-up)
but once you drive her for awhile she does'nt do it.
so i'm thinking the icm is bad
i've just today replaced the coilpack and the wires.
do yall have any suggestions?
thanks
i have a 1994 pontiac grand am gt 3100 4spd auto
w/ 168k miles on her.
i did a tuneup ehh a while back...well two tune ups.
used regular delco's and they went bad...found out i'm supposed to use platium.
well i did'nt have enough money for the platium so i bought rapid fires.
now here's what happens
when you take off around 10-20mph the engine bogs.
a few times it bogged so bad that it sound like the engine was gonna die out.
and inorder for me to get her moving i had to play with the gas till i reached abouve 20mph.
that was solved by replaceing the pcm.
now the one i have is from a 95 grand am with the sport package....but i don't feel comfortable with it unless it's a gt....and i seen one at the j/y.
now whats happens when the engine is cold she misfires and bogs.
once she's in closed loop she.....
it's kinda hard to describe.
i'm assuming it's bogging, because when she reaches high rpms (4500-6200rpms) i can hear like a popping from my cold air intake.
But also followed by a rich exhaust smell.
i removed two of the front sparkplugs and they had some crap on them(assuming it's carbon build-up)
but once you drive her for awhile she does'nt do it.
so i'm thinking the icm is bad
i've just today replaced the coilpack and the wires.
do yall have any suggestions?
thanks
- berettajunkie1991
- Registered User
- Posts: 217
- Joined: Sat Jul 16, 2005 1:40 am
- Location: Illinois
- Contact:
issue
does it sound like it is running on four cylinders? if it does try this take the plug wire off each cylinder and see if it makes a difference if it does that cylinder is firing and performing as it should however if it does not make a difference on how the engine runs then trace your wire to Coils and ICM that would be the suspect more than likely.
- pontiac3100
- Registered User
- Posts: 19
- Joined: Sun Apr 22, 2007 8:39 pm
- Location: chi-town
issue
no it's as if the engine is flooding it.
but once she warms up it goes away, but when you floor it it seems to like...bog at higher rpms.
but once the temp reaches 210*F it does'nt matter.
as long as it's hot under the hood i could hit 6200rpms all i want and she not "bogg".....
but once she warms up it goes away, but when you floor it it seems to like...bog at higher rpms.
but once the temp reaches 210*F it does'nt matter.
as long as it's hot under the hood i could hit 6200rpms all i want and she not "bogg".....
- pontiac3100
- Registered User
- Posts: 19
- Joined: Sun Apr 22, 2007 8:39 pm
- Location: chi-town
issue
okay replaced icm and coils....it's the same
-
- Registered User
- Posts: 720
- Joined: Wed Apr 25, 2001 5:39 pm
- Location: Shelbina, MO
- Contact:
issue
Did your plugs have grey ash deposits or were they black?
Rex Weatherford
92 Beretta GTZ Quad4 Turbo / 5-speed (sold)
Best 1/4 ET =  13.523 @ 105.16 mph
07 Mazda 5 Black on Black (it's slow)
92 Beretta GTZ Quad4 Turbo / 5-speed (sold)
Best 1/4 ET =  13.523 @ 105.16 mph
07 Mazda 5 Black on Black (it's slow)
- pontiac3100
- Registered User
- Posts: 19
- Joined: Sun Apr 22, 2007 8:39 pm
- Location: chi-town
issue
well they had some drud on them th elast time i look then today that crud was gone...but the tip insulator was whiteish/gray
- pontiac3100
- Registered User
- Posts: 19
- Joined: Sun Apr 22, 2007 8:39 pm
- Location: chi-town
issue
okay (sighs) here's the update.
replaced icm, coils,wires.
i removed the cam sensor harness while the car was running...no ses light.
figured eh she's still in open loop mode.
i read in the chiltons manual that when the cam sensor is bad the pcm will shift to a calculated program but when you shut off the car and try to restart it...you won't be able to.
okay i drove her for about a good hour...no ses light.
i stopped at my first stop shut her off and started her up....and she started?
i left it out for a while.
each and evrytime she started...only differences is theres a slight hesitation between 600-1000 rpms on take off.
flooring it it did'nt do the bogging, or stumble.
hooked up my scanner came up with two codes cam sensor circuit.
no egr code.
connected the cam sensr and egr harness back.
drove started to floor her and she acted up.
i thought damn so it is the cam sensor.
so to be sure i removed the harness again.
and she still did it.
but after the icm replacement here's the thing she only does it around 5,000-5500rpms.
so i hooked the scanner up.
the coolant sensor is fine.
what i find suspicious(msp?) right now is the tps or o2 sensor.
when the engine is cold the volts flunctuate between .40v-.50v quickly.
when warmed the volts read out .51v at idle.
at wot the volts read 4.34v
the o2 sensor readings changes quickly but where the readings are makes you wonder.
on the highway the readings are above 500mV.
but when you let the gas go or when you sometimes floor it the readings are under 500mV.
oh yea also when the bogging happens i smell the richness.
other than that...nothing.
replaced icm, coils,wires.
i removed the cam sensor harness while the car was running...no ses light.
figured eh she's still in open loop mode.
i read in the chiltons manual that when the cam sensor is bad the pcm will shift to a calculated program but when you shut off the car and try to restart it...you won't be able to.
okay i drove her for about a good hour...no ses light.
i stopped at my first stop shut her off and started her up....and she started?
i left it out for a while.
each and evrytime she started...only differences is theres a slight hesitation between 600-1000 rpms on take off.
flooring it it did'nt do the bogging, or stumble.
hooked up my scanner came up with two codes cam sensor circuit.
no egr code.
connected the cam sensr and egr harness back.
drove started to floor her and she acted up.
i thought damn so it is the cam sensor.
so to be sure i removed the harness again.
and she still did it.
but after the icm replacement here's the thing she only does it around 5,000-5500rpms.
so i hooked the scanner up.
the coolant sensor is fine.
what i find suspicious(msp?) right now is the tps or o2 sensor.
when the engine is cold the volts flunctuate between .40v-.50v quickly.
when warmed the volts read out .51v at idle.
at wot the volts read 4.34v
the o2 sensor readings changes quickly but where the readings are makes you wonder.
on the highway the readings are above 500mV.
but when you let the gas go or when you sometimes floor it the readings are under 500mV.
oh yea also when the bogging happens i smell the richness.
other than that...nothing.
- pontiac3100
- Registered User
- Posts: 19
- Joined: Sun Apr 22, 2007 8:39 pm
- Location: chi-town
issue
^^^^^^please
it's back again
it's back again
- pontiac3100
- Registered User
- Posts: 19
- Joined: Sun Apr 22, 2007 8:39 pm
- Location: chi-town
issue
okay now i'm starting to get worried.
in drive the rpms sometimes get low (500rpms)and it bouces up and down a little.
in drive the rpms sometimes get low (500rpms)and it bouces up and down a little.
- berettajunkie1991
- Registered User
- Posts: 217
- Joined: Sat Jul 16, 2005 1:40 am
- Location: Illinois
- Contact:
issue
I have had that problem do you have a cold air intake? i do and i did not relocate the AIt sensor play with the wires going to it. i noticed when my connector was going bad the idle would bounce around almost to the point of dying.
- pontiac3100
- Registered User
- Posts: 19
- Joined: Sun Apr 22, 2007 8:39 pm
- Location: chi-town
issue
yea...but i left it where it is.
if the connector was bad the ses light whould come on.
the pcm relies on that more than the o2 sensor but umm do yall think i'm showing symptoms of a clogged cat??
if the connector was bad the ses light whould come on.
the pcm relies on that more than the o2 sensor but umm do yall think i'm showing symptoms of a clogged cat??
- pontiac3100
- Registered User
- Posts: 19
- Joined: Sun Apr 22, 2007 8:39 pm
- Location: chi-town
issue
bump
- pontiac3100
- Registered User
- Posts: 19
- Joined: Sun Apr 22, 2007 8:39 pm
- Location: chi-town
issue
bump...please?
- pontiac3100
- Registered User
- Posts: 19
- Joined: Sun Apr 22, 2007 8:39 pm
- Location: chi-town
issue
someone please help?
- pontiac3100
- Registered User
- Posts: 19
- Joined: Sun Apr 22, 2007 8:39 pm
- Location: chi-town
issue
bump...again: