Downpipe
-
- Registered User
- Posts: 75
- Joined: Sun Jul 22, 2001 2:17 pm
- Location: Your Mom
- Contact:
Downpipe
This would be a good question for gar or canada I think.
How do I go about removing my downpipe for my 3100? I see two bolts that seem to connect to the manifold from the top of the pipe. Once I get that off how do I remove the little pipe that is inside the original downpipe? Does it just fall out or do I have to cut it out?
How do I go about removing my downpipe for my 3100? I see two bolts that seem to connect to the manifold from the top of the pipe. Once I get that off how do I remove the little pipe that is inside the original downpipe? Does it just fall out or do I have to cut it out?
1996 zed26 Worst
2000 Katana Better
2006 Gsx-R Best
2000 Katana Better
2006 Gsx-R Best
-
- Registered User
- Posts: 141
- Joined: Sat Feb 23, 2002 12:59 pm
- Location: Elkhart, Iowa
- Contact:
Downpipe
Unbolt it. Then I cut the metal bracket that connects to the manifold off with about 7" of pipe. Then you have a nice straigth section of pipe to use a punch and BFH on.
-2007 Saturn Sky Redline
-2007 Chevrolet Silverado Classic 2500HD
-2006 Chevrolet Impala SS
-1996 Chevrolet Camaro Z28
-1996 Chevrolet Beretta
-
- Registered User
- Posts: 75
- Joined: Sun Jul 22, 2001 2:17 pm
- Location: Your Mom
- Contact:
Downpipe
Quote (Canada @ Aug. 23 2002,10:58)Unbolt it. Then I cut the metal bracket that connects to the manifold off with about 7" of pipe. Then you have a nice straigth section of pipe to use a punch and BFH on.
Ok, so I just unbolt those two bolts and the pipe will come right off? Then I just beat the jesus out of the little one inside of it?
I'm trying to get a visual picture here, sorry
You tore out the smaller diameter pipe inside the original pipe and then just cut off all but a couple inches from the bracket that bolts to the back of the manifold, right?
Ok, so I just unbolt those two bolts and the pipe will come right off? Then I just beat the jesus out of the little one inside of it?
I'm trying to get a visual picture here, sorry
You tore out the smaller diameter pipe inside the original pipe and then just cut off all but a couple inches from the bracket that bolts to the back of the manifold, right?
1996 zed26 Worst
2000 Katana Better
2006 Gsx-R Best
2000 Katana Better
2006 Gsx-R Best
-
- Registered User
- Posts: 141
- Joined: Sat Feb 23, 2002 12:59 pm
- Location: Elkhart, Iowa
- Contact:
Downpipe
yeah, the inner pipe was pressed in there...no welds or anything. the only mount points that were on my exhaust was the manifold connection and the rear hanger in, well, the rear.
-2007 Saturn Sky Redline
-2007 Chevrolet Silverado Classic 2500HD
-2006 Chevrolet Impala SS
-1996 Chevrolet Camaro Z28
-1996 Chevrolet Beretta
-
- Registered User
- Posts: 75
- Joined: Sun Jul 22, 2001 2:17 pm
- Location: Your Mom
- Contact:
Downpipe
Thanks man. I really appreciate the help.
1996 zed26 Worst
2000 Katana Better
2006 Gsx-R Best
2000 Katana Better
2006 Gsx-R Best
Downpipe
Is it possilbe to remove this inner 1.5" thing in the down pipe and use stock piping?
Like can you unbolt it and remove it and bolt it backtogether? I can't picture what you guys are talking about. The most I've done is look at the under side where the mount/doughnut thing is...
And if you go to bigger pipe how does the doughnut thing bolt to the new pipe?
Like can you unbolt it and remove it and bolt it backtogether? I can't picture what you guys are talking about. The most I've done is look at the under side where the mount/doughnut thing is...
And if you go to bigger pipe how does the doughnut thing bolt to the new pipe?
-
- Registered User
- Posts: 141
- Joined: Sat Feb 23, 2002 12:59 pm
- Location: Elkhart, Iowa
- Contact:
Downpipe
The only way to remove the inner pipe is to cut the downpipe in half so you can pull it out. The inner pipe measures 2" O.D., and the outside pipe measures 2.25" O.D.
-2007 Saturn Sky Redline
-2007 Chevrolet Silverado Classic 2500HD
-2006 Chevrolet Impala SS
-1996 Chevrolet Camaro Z28
-1996 Chevrolet Beretta
-
- Registered User
- Posts: 75
- Joined: Sun Jul 22, 2001 2:17 pm
- Location: Your Mom
- Contact:
Downpipe
Does the spot were it attachs to the manifold just unbolt like everything else? My local muffler shop is being a pita so I am gonna do it myself when i get time.
1996 zed26 Worst
2000 Katana Better
2006 Gsx-R Best
2000 Katana Better
2006 Gsx-R Best
- tweekster64
- Registered User
- Posts: 51
- Joined: Sat Jul 14, 2001 12:46 pm
- Location: JACKSON, MN 56143
- Contact:
Downpipe
Canada, is them Iowa plates on that car in your sig??
What part of Iowa are you from??
What part of Iowa are you from??
1991 Ford F150 Lariat XLT ext cab-short box
1990 Lincoln Town Car
I'll have another Beretta someday
1990 Lincoln Town Car
I'll have another Beretta someday
-
- Registered User
- Posts: 141
- Joined: Sat Feb 23, 2002 12:59 pm
- Location: Elkhart, Iowa
- Contact:
Downpipe
Yes those are Iowa. I am from Northeast Iowa. I live near Manchester, which is about 1 hr north of Cedar Rapids, or 20 min. west of Earlville (where the drag strip is at).
-2007 Saturn Sky Redline
-2007 Chevrolet Silverado Classic 2500HD
-2006 Chevrolet Impala SS
-1996 Chevrolet Camaro Z28
-1996 Chevrolet Beretta