I'm nuts!
- jtcoolhands
- Registered User
- Posts: 24
- Joined: Thu May 03, 2007 8:11 pm
- Location: Fort McMurray Alta.
I'm nuts!
Hey Money how's it going  Nice Ride bud, enjoy. Sry haven't checked sooner but have been really busy around here.  Cars running much better now except for another leak popping up?? typical beretta,  lol.  It's only a steering line though so I should have an easy time finding one I hope. Checked a couple of online parts sites but they tell me GM has deleted making  it for a '90  , guess it time to start checking out the salvage yards. Its the  power steering pressure line, do you know if they are universal for the 3.1l or should I start looking harder?  So after reading everyones posts...  Where's the pics???
- SuzukiGhostRider
- Registered User
- Posts: 2464
- Joined: Tue Feb 12, 2008 4:07 am
- Location: Milan NM
- Contact:
- jtcoolhands
- Registered User
- Posts: 24
- Joined: Thu May 03, 2007 8:11 pm
- Location: Fort McMurray Alta.
I'm nuts!
thanks SGR I'll check it out today.
- SuzukiGhostRider
- Registered User
- Posts: 2464
- Joined: Tue Feb 12, 2008 4:07 am
- Location: Milan NM
- Contact:
- SuzukiGhostRider
- Registered User
- Posts: 2464
- Joined: Tue Feb 12, 2008 4:07 am
- Location: Milan NM
- Contact:
I'm nuts!
MPB, you know I consider you a friend, but.... this will be you if I have to come to Kansas to get those pics...
- jtcoolhands
- Registered User
- Posts: 24
- Joined: Thu May 03, 2007 8:11 pm
- Location: Fort McMurray Alta.
I'm nuts!
lol SGR good pic. MPB??
-
- Registered User
- Posts: 357
- Joined: Mon Apr 09, 2007 11:07 pm
- Location: Beavercreek, Ohio
- Contact:
I'm nuts!
lmao!!!!!!! ya money we will come for you!!!!!!!! post dem pics!!!!!!!!!!
1993 Beretta GT, FX Designs Body Kit, Ram Air hood, 3.1 MPFI 3 Speed, 90,000 miles
1996 Beretta Base, GTU conversion, 3400sfi with less than 100,000 miles == Traded
- Money pit Beretta
- Registered User
- Posts: 6411
- Joined: Thu Jul 26, 2007 11:36 am
- Location: Kansas
I'm nuts!
Hey jt! Yea, know what you are talking about. I'm looking for parts again(also some go fast goodies). What else are you looking for jt(I'll be checking some of my old sites for parts)? I've been out of town and took four rolls of film(none of the car,sorry everybody a big storm came in on the lake and shot everything I had). The Cav's A/C is down(found out on the way there, that makes two cars without A/C). Great photo SGR! Man, I got alot to do this weekend, trans fluid and filter,swaybar end links, clean the Cav and get some photo's of the car(also need to send some money to Isaac Hayes). Again, sorry for not getting the pics!
keep'em flying!
-
- Registered User
- Posts: 357
- Joined: Mon Apr 09, 2007 11:07 pm
- Location: Beavercreek, Ohio
- Contact:
I'm nuts!
hey SGR he's makin excuses again lol Just playin with ya money. You know we love ya man!
1993 Beretta GT, FX Designs Body Kit, Ram Air hood, 3.1 MPFI 3 Speed, 90,000 miles
1996 Beretta Base, GTU conversion, 3400sfi with less than 100,000 miles == Traded
- SuzukiGhostRider
- Registered User
- Posts: 2464
- Joined: Tue Feb 12, 2008 4:07 am
- Location: Milan NM
- Contact:
- SuzukiGhostRider
- Registered User
- Posts: 2464
- Joined: Tue Feb 12, 2008 4:07 am
- Location: Milan NM
- Contact:
I'm nuts!
Alright Money, you cheap bastage. I know times are tight and money's hard ,but get a $20 dig at Wally World. Me and 6r8 are jonesin' here man!!!
-
- Registered User
- Posts: 357
- Joined: Mon Apr 09, 2007 11:07 pm
- Location: Beavercreek, Ohio
- Contact:
I'm nuts!
seriously man, where's the pics!!!!!!!!!     ÂÂÂ
1993 Beretta GT, FX Designs Body Kit, Ram Air hood, 3.1 MPFI 3 Speed, 90,000 miles
1996 Beretta Base, GTU conversion, 3400sfi with less than 100,000 miles == Traded
- Money pit Beretta
- Registered User
- Posts: 6411
- Joined: Thu Jul 26, 2007 11:36 am
- Location: Kansas
I'm nuts!
Like I said, I was very busy, but did get three shots in. Money is getting tight, there are more repairs in the works also. Cav has it's A/C back, they charged $100 for a recharge(would have done it my self,but the compresser had made a strange noise, I thought it may be out). Drove the Beretta to work and the rain was dripping from under the dash on the passenger side!?!? The trans pan looked as if it hadn't been cleaned ever(in and out). Couldn't get the swaybar end links in(will try again this weekend on the flat part of the drive). Hey, where is the oil pressure sender on a 3100(I know where it is on a 3.1)? I need to get as much done as I can because the header and cat back will soon be here for the Cav(ordered the header before I bought the Beretta). Hang in there guys, I will get the pics!
keep'em flying!
-
- Registered User
- Posts: 357
- Joined: Mon Apr 09, 2007 11:07 pm
- Location: Beavercreek, Ohio
- Contact:
I'm nuts!
to get to the oil pressure sensor, take off the starter and it will be in plain view man, you can't get to it any other way really.
1993 Beretta GT, FX Designs Body Kit, Ram Air hood, 3.1 MPFI 3 Speed, 90,000 miles
1996 Beretta Base, GTU conversion, 3400sfi with less than 100,000 miles == Traded