needs parts list

[Mr.Collins]

i have a 90 base 3.1L beretta i need the parts list the 3400/5speed swap thanks

[KFLO 93 GT]

I'm going to work off of the basis that you have an automatic car. Overall this is a short and rough list of needed part, the 5 speed swap is easy on the 87-91 cars since the mounting is the same between autos and manuals.

For the 5 speed swap: Find a donor car and get:

89-91 v6 5 speed tranny (ideally)
Both shift cables, the shifter assembly
Clutch pedal assembly
Clutch hydraulics (master, slave, reservoir, lines, get as 1 piece)
5 speed flywheel
A clutch/p.p. and t.o.b.
Both axles
chip from the donor car

For 3400 swap (short/rough list):
3400 engine...
Custom made front mount bracket
3100 power steering pump from Beretta or Corsy
94+ V6 Lbody throttle cable & brake booster vacuum hose
Lower radiator hose from 99 Pontiac Montana - use as new upper radiator hose

You will re-use:
Your alternator and mounting bracket
Serpentine Belt Tensioner
Oil Pressure Sensor

This link is quite helpful as well:
http://www.domesticcrew.com/installguide.htm

I recommend getting friendly with it.

[Mr.Collins]

Any 5speed FWD chevy trannys will work? one more questionWhat would i use to tune my beretta when get my turbo kit done it will still be the 3.1L

[Barry]

You can use the turbo grand prix code loaded onto your stock computer and work from there.

You need a tranny from any v6 5-speed beretta or cavalier.