Project B - 1991 3400 OBII 5-Speed
Re: Project B - 1991 3400 OBII Muncie 5-Speed
I didn't plug my trans cooler lines. If its a common thread type it would be easy to do with plugs from lowes or something.
- Luckymc420
- Registered User
- Posts: 489
- Joined: Mon Jul 10, 2006 1:31 pm
- Location: Des Moines, Iowa
Re: Project B - 1991 3400 OBII Muncie 5-Speed
I tried to get that mount but I heard he was out. Im not sure about the poly stuff. Fill me in. I figured I better plug it up so salt and crap does not get inside and make problems. Work is going to give me the plugs, they just don't know it.
- IsaacHayes
- Registered User
- Posts: 975
- Joined: Fri Oct 07, 2005 8:32 pm
- Location: Missouri
Re: Project B - 1991 3400 OBII Muncie 5-Speed
I'd at least re-enforce the mount with thicker metal, v6z24.com has shown a stock 3400 bending those.... then fill with 2-part poly however you can...
- Money pit Beretta
- Registered User
- Posts: 6411
- Joined: Thu Jul 26, 2007 11:36 am
- Location: Kansas
- Luckymc420
- Registered User
- Posts: 489
- Joined: Mon Jul 10, 2006 1:31 pm
- Location: Des Moines, Iowa
Re: Project B - 1991 3400 OBII Muncie 5-Speed
Yeah those are my stock ones. I welded the sides a little to help them and then painted them. I did stratch the paint putting the lower ball joints on but I mean they are going to get dirty.
- Money pit Beretta
- Registered User
- Posts: 6411
- Joined: Thu Jul 26, 2007 11:36 am
- Location: Kansas
- Luckymc420
- Registered User
- Posts: 489
- Joined: Mon Jul 10, 2006 1:31 pm
- Location: Des Moines, Iowa
Re: Project B - 1991 3400 OBII Muncie 5-Speed
Well ran into a problem here. I am looking for the pass. side sub frame with both horz. bushing and also have a mount for a dog bone. I thought 90s - 93 ran those on the 2.8 and 3.1L. Correct me if im wrong.
Re: Project B - 1991 3400 OBII Muncie 5-Speed
Not quite. Only 87-91 will work in that case. The 92 and 93 will have the horizontal bushings but no dogbone mount.
Corsica frames work too, I am using them with no issue.
Corsica frames work too, I am using them with no issue.
-
- Administrator
- Posts: 1775
- Joined: Wed Mar 03, 2004 10:03 pm
- Location: Long Grove, IL
- Contact:
Re: Project B - 1991 3400 OBII Muncie 5-Speed
Barry, the 92-93 do have the mount on the subframe on the passenger side which was the side in question.
Cliff Scott
- Luckymc420
- Registered User
- Posts: 489
- Joined: Mon Jul 10, 2006 1:31 pm
- Location: Des Moines, Iowa
Re: Project B - 1991 3400 OBII Muncie 5-Speed
Well F. I had one in sight but didn't have the dog bone. Oh well.
Re: Project B - 1991 3400 OBII Muncie 5-Speed
Looks like I failed again! LOLCliff8928 wrote:Barry, the 92-93 do have the mount on the subframe on the passenger side which was the side in question.
Yes, 92 and 93 are the only passenger side frames with horizontals and a engine dogbone bracket.
For some reason I was thinking tranny dogbone....
- woody90gtz
- Registered User
- Posts: 4706
- Joined: Thu Jul 11, 2002 8:45 pm
- Location: Walton, NY
- Contact:
Re: Project B - 1991 3400 OBII Muncie 5-Speed
The billet trans mount could be fabbed pretty easily if you really wanted to. It's very simple.
91 "SS" - WOT 3400/5spd - 13.29@101.6 - World's fastest N/A FWD Beretta
96 "T56" LS/6spd/8.8 RWD swap - 13.45@104.7 lol
GEARHEAD dezign youtube
96 "T56" LS/6spd/8.8 RWD swap - 13.45@104.7 lol
GEARHEAD dezign youtube
- Luckymc420
- Registered User
- Posts: 489
- Joined: Mon Jul 10, 2006 1:31 pm
- Location: Des Moines, Iowa
Re: Project B - 1991 3400 OBII Muncie 5-Speed
I was talking about the engine dog bone mount on the right side. Im going to call some junk yards right about now!woody90gtz wrote:The billet trans mount could be fabbed pretty easily if you really wanted to. It's very simple.
- Luckymc420
- Registered User
- Posts: 489
- Joined: Mon Jul 10, 2006 1:31 pm
- Location: Des Moines, Iowa
Re: Project B - 1991 3400 OBII Muncie 5-Speed
OK I think I found one on a corsica but I have to take it off at the JY. Not really wanting to do that but I guess I will have to. Thanks for info guys!
- Luckymc420
- Registered User
- Posts: 489
- Joined: Mon Jul 10, 2006 1:31 pm
- Location: Des Moines, Iowa
Re: Project B - 1991 3400 OBII 5-Speed
I am lookin for a jack shaft and all.
If no one has one what year and kind of cars should I look for. I heard some have different length that's why im askin.
If no one has one what year and kind of cars should I look for. I heard some have different length that's why im askin.