My 1995 Chevy Beretta Z26

List a Beretta Item for sale
User avatar
NocturnalZ26
Registered User
Posts: 19
Joined: Wed Jan 05, 2011 11:44 am
Location: Minnesota

My 1995 Chevy Beretta Z26

Post by NocturnalZ26 »

http://minneapolis.craigslist.org/dak/c ... 85299.html

Hate to see it go but its getting older and i have my eyes on a 1997 Grand Prix GTP
1997 Grand Prix GTP
Hoping to get a beretta again. last time i had one was in 2010 and it was my Black Z26
MY91GT(Z)
Registered User
Posts: 1261
Joined: Sun Mar 12, 2006 12:11 am
Location: Rochester New York
Contact:

Re: My 1995 Chevy Beretta Z26

Post by MY91GT(Z) »

99 gtp are the one to go for especially if you decide to tune they have better s/c and maf id=f you decide to mod and tune yourself but good luck
Cliff8928
Administrator
Posts: 1775
Joined: Wed Mar 03, 2004 10:03 pm
Location: Long Grove, IL
Contact:

Re: My 1995 Chevy Beretta Z26

Post by Cliff8928 »

Yeah, definitely avoid the '97. 4T60-E is FTL on those.
Cliff Scott
Image
User avatar
NocturnalZ26
Registered User
Posts: 19
Joined: Wed Jan 05, 2011 11:44 am
Location: Minnesota

Re: My 1995 Chevy Beretta Z26

Post by NocturnalZ26 »

wow sounds like i shouldnt get a 1997 grand prix now lol.
1997 Grand Prix GTP
Hoping to get a beretta again. last time i had one was in 2010 and it was my Black Z26
User avatar
3X00-Modified
Administrator
Posts: 10915
Joined: Thu Jul 05, 2007 9:18 am
Location: Brooklyn CT

Re: My 1995 Chevy Beretta Z26

Post by 3X00-Modified »

personal preference, I'm running 12's with the said FTL 4t60e... Obviously upgraded but it does show it can be done. Yes a 4t45e has better controls though if you go newer... With OBDII programming you can change shift times and pressures which I wish I could do.
Mr.Pink
Supreme Unit
Sleepy Goodness
"Beretta Guy"
User avatar
3400beretta
Registered User
Posts: 281
Joined: Fri Mar 10, 2006 2:21 am

Re: My 1995 Chevy Beretta Z26

Post by 3400beretta »

He said grand prix GTP.. as far as I knew all 97 and newer GTP's got the 4t65e-hd. Unless I'm missing something here?
A 97 GT would have a 4t60e
98 and newer GT's have a 4t65e.
User avatar
3X00-Modified
Administrator
Posts: 10915
Joined: Thu Jul 05, 2007 9:18 am
Location: Brooklyn CT

Re: My 1995 Chevy Beretta Z26

Post by 3X00-Modified »

Yeah your right, I read that wrong. I want a 4t65e... lol
Mr.Pink
Supreme Unit
Sleepy Goodness
"Beretta Guy"
Cliff8928
Administrator
Posts: 1775
Joined: Wed Mar 03, 2004 10:03 pm
Location: Long Grove, IL
Contact:

Re: My 1995 Chevy Beretta Z26

Post by Cliff8928 »

3X00-Modified wrote:personal preference, I'm running 12's with the said FTL 4t60e... Obviously upgraded but it does show it can be done.
Well, not that your 4T60-E is FTL, but a stock one that's been behind a heavy GTP for 14 years sure wouldn't be recommended.
Cliff Scott
Image
90GTZHO
Registered User
Posts: 1068
Joined: Sun Nov 02, 2003 11:54 am
Location: Paulden, AZ
Contact:

Re: My 1995 Chevy Beretta Z26

Post by 90GTZHO »

Just so you guys know, 96 3800S2 SC motors are the only ones that got the 4t60E and they were an HD unit at that. Those are kinda rare to find.

In 97 when Pontiac changed the body style of the GP the 3800S2 SC motor came stock with the 4T65E-HD up thru 03 then the trans got a revision in 04.

Honestly, you want a 97 or 98. The 99-03 are the ones that had a service bulletin out for spontaneous combustion of the engine bay. If you dont believe me, look it up and you will see. The 97 has just as much aftermarket support as the later ones. If you wander onto the W-body boards, you will see, 99-03 were notorious for engine fires. 97-98 are the only years that didnt have the issue. How do i know all this, i used to be BIG into the W-body scene, i had lots of years of research ;)
Geoff
95 Base V6: Current Project; Work In Progress
Z26_T
Registered User
Posts: 372
Joined: Mon Oct 11, 2010 12:53 pm
Location: Indiana

Re: My 1995 Chevy Beretta Z26

Post by Z26_T »

the engine fires were just from the valve cover gaskets leaking :). Did a few of those safety recalls myself.
heavywoody wrote:Beretta, fast, reliable, and cost effective are words that should not be used in the same sentence.
95' BRM Z26. cammed/ported 3400/3500 Hybrid. HM282, OBD2, Garret T3/T04E 60 Trim, IC.
90GTZHO
Registered User
Posts: 1068
Joined: Sun Nov 02, 2003 11:54 am
Location: Paulden, AZ
Contact:

Re: My 1995 Chevy Beretta Z26

Post by 90GTZHO »

From what i read from GM TSB's it wasnt valve covers it was a fuel line routing problem, something about possible fuel line damage because it ran close to the exhaust manifold, it would melt the lines, cause a leak then a fire. It was never a recall, it was just a TSB. Park Aves, Bonne's and GP's all had the same problem. There have been a number of 99-03 GP's and Park Aves in the yards out here that were a result of the fire.
Geoff
95 Base V6: Current Project; Work In Progress
MY91GT(Z)
Registered User
Posts: 1261
Joined: Sun Mar 12, 2006 12:11 am
Location: Rochester New York
Contact:

Re: My 1995 Chevy Beretta Z26

Post by MY91GT(Z) »

the fire stems from where the fuel lines connect on top of the s/c their is rubber o-rings in where they clamp together that dry out from the heat of the s/c in return would leak fuel to start the fires. i would say 98 are the best year for gp as they have the different vac setup from the 97 on the s/c and their has been many people that upgrade the trannies as long as you can tune for the 04 newer as i have heard thats when they started to get better but you would have to reroute the tranny cooler lines
User avatar
NocturnalZ26
Registered User
Posts: 19
Joined: Wed Jan 05, 2011 11:44 am
Location: Minnesota

Re: My 1995 Chevy Beretta Z26

Post by NocturnalZ26 »

Beretta might be sold tonight im gonna miss it soo much. so what year grand prix would be good to get?
1997 Grand Prix GTP
Hoping to get a beretta again. last time i had one was in 2010 and it was my Black Z26
heavywoody
Global Moderator
Posts: 1991
Joined: Sun Nov 03, 2002 4:10 pm
Location: Concord, NC
Contact:

Re: My 1995 Chevy Beretta Z26

Post by heavywoody »

Avoid the 97's; they were a bit quirky to deal with (electrical issues, transmission issues, etc). I'd get a 98-00 if I was going to get one again ( I had a 2000 GTP).
Geoff
95 Z26 Turbo 3400 5spd - R&D Project
Beretta Preservation Society - Director of Acquisitions
Image
MY91GT(Z)
Registered User
Posts: 1261
Joined: Sun Mar 12, 2006 12:11 am
Location: Rochester New York
Contact:

Re: My 1995 Chevy Beretta Z26

Post by MY91GT(Z) »

i agree^^^
Post Reply