3400 swap into 91 Beretta GT

[michi]

Hey, i did some searches but havent found much anymore about this swap... I remember some things about this swap like that i need a different motor mount since my car has the older style mounts but im not that sure. What do i exactly have to get to get this engine in my 91 GT? Also, can i run stock ecm or is there a chip for this swap? If this matters, the beretta is a 5speed and 3.1 V6. Anyone has some more information(links for parts and/or swap) or can tell me what i will need for this swap?

Thanks

[MY91GT(Z)]

You would need a bracket from daveycav on v6z24.com and you would also need the from 94 newer beretta a throttle cable, brake booster hose, and also the hardline that screws in the p.s pump. they say their coolant hoses to swap to but i have used the stock ones just fine and have done this swap twice. and you would need a chip to run the injectors to get full potential from this swap but you can run the stock 3.1 injectors for while just to get the car up and running and on stock chip

[michi]

Thanks man. If i am doin this swap i want to rebuild the engine and get a wot-tech street/strip cam for it and some other performace parts, i have to seen then but atleast the camshaft. Who can burn a chip for this swap? Too bad i dont know anyone that does OBD1 tuning where i live... so thats the problem i am thinking about.. the tuning. cause i want to keep it a daily driver as it looks right now. Just with some horses more than the good old 3.1

[Barry]

Talk to scott999. On v6z24 he sells chips just for this swap and there pretty cheap

[michi]

Thanks barry.

[MY91GT(Z)]

if your goinfg to cam it you need to talk to ben on wot-tech as he knows his cams and would be better to dial it in