Wanted: Beretta parts in PA
Wanted: Beretta parts in PA
okay, I'm basically looking for a headliner (mine was ripped out by previous owner) for a factory sunroof 89 GTU with gray interior and maybe a "cheap" dash cover because mine was spray bombed flat white and has bondo smeared on it (thanks previous owner)
And if anyone knows where I could get said items cheap-ish let me know.
(I've checked Craigslist and Ebay motors)
I'd be interested in basically any beretta parts though.
Thanks.
And if anyone knows where I could get said items cheap-ish let me know.
(I've checked Craigslist and Ebay motors)
I'd be interested in basically any beretta parts though.
Thanks.
Re: Wanted: Beretta parts in PA
where you from, i have a crap load or parts, i dont have a factory sunroof headliner however, i could probably help you find one. and what else you interested in??
i even have a gtu/indy front lip, gtu/indy spoilers, mirrors, and many other parts that i would be more then happy to sell.
edit: im in the lehigh valley area. but i also travel a lot to topton, mertztown, alburtis, allentown, and soon i will be driving towards tobayanna, broadheadsville, ect.


edit: im in the lehigh valley area. but i also travel a lot to topton, mertztown, alburtis, allentown, and soon i will be driving towards tobayanna, broadheadsville, ect.
1991 beretta GTZ- 2.3l w41 cams, ported 086 head with a 3 angle valve job, fidanza flywheel with exedy racing clutch, 3.94fdr from and scx, so much more..
Re: Wanted: Beretta parts in PA
I live in the hummels wharf area.
Like I said, basically anything, I could use non-fogged headlights (mine aren't bad, but I'd like non-fogged ones) a front bumper (mine has spider cracks in the paint infront of the one headlight) the trim for around the door jambs that covers the sides of the rear side panels..ect
Like I said, basically anything, I could use non-fogged headlights (mine aren't bad, but I'd like non-fogged ones) a front bumper (mine has spider cracks in the paint infront of the one headlight) the trim for around the door jambs that covers the sides of the rear side panels..ect
Re: Wanted: Beretta parts in PA
Ha! Finding Beretta parts in PA has to be like looking for a needle in a needlestack!
1989 GTU - The Nice Car
1989 Euro GTU - The Euro Car
1989 Base Model - The Rally Car
1989 Euro GTU - The Euro Car
1989 Base Model - The Rally Car
Re: Wanted: Beretta parts in PA
really??? becouse heres a few pics of the beretta's ive found over the past 3-4 years...

1990
4 gtz.

1991 3.1l gtz

seen a few with this kit on.

90 gtz quad 4.

91 gtz 3.1l

90 yellow indy...
and thats just a few examples, i have pictures of gtu's, indy's in teal and yellow, z26's and i dont really bother taking pics of base models or gt's. theres more beretta parts in pa then i think in any other state...

1990
4 gtz.

1991 3.1l gtz

seen a few with this kit on.

90 gtz quad 4.

91 gtz 3.1l

90 yellow indy...
and thats just a few examples, i have pictures of gtu's, indy's in teal and yellow, z26's and i dont really bother taking pics of base models or gt's. theres more beretta parts in pa then i think in any other state...
1991 beretta GTZ- 2.3l w41 cams, ported 086 head with a 3 angle valve job, fidanza flywheel with exedy racing clutch, 3.94fdr from and scx, so much more..
Re: Wanted: Beretta parts in PA
My statement was meant to imply that there are a sheet-ton of Berettas in PA and finding parts should not be a problem.
No one said that you were looking for a specific needle in that needlestack... making it VERY easy to find.
No one said that you were looking for a specific needle in that needlestack... making it VERY easy to find.
1989 GTU - The Nice Car
1989 Euro GTU - The Euro Car
1989 Base Model - The Rally Car
1989 Euro GTU - The Euro Car
1989 Base Model - The Rally Car
Re: Wanted: Beretta parts in PA
Yeah, but I was hoping that I could find decent parts that aren't from a junkyard...
And you have to special order most parts for berettas from autoparts because they don't have them in stock and they need to be shipped in.
@speedy Are those pics from Comforts junkyard? I think I've seen those before.
And you have to special order most parts for berettas from autoparts because they don't have them in stock and they need to be shipped in.
@speedy Are those pics from Comforts junkyard? I think I've seen those before.
Re: Wanted: Beretta parts in PA
no, there from yards around me over the years... i wish them gtz's were still there, i need parts for mine, i didnt have mine when they were there...
1991 beretta GTZ- 2.3l w41 cams, ported 086 head with a 3 angle valve job, fidanza flywheel with exedy racing clutch, 3.94fdr from and scx, so much more..
Re: Wanted: Beretta parts in PA
You can find excellent junkyard parts. Just because it has been classified as "junk", doesn't mean that it is.
Hell, I built my car from yard parts.
Hell, I built my car from yard parts.
1989 GTU - The Nice Car
1989 Euro GTU - The Euro Car
1989 Base Model - The Rally Car
1989 Euro GTU - The Euro Car
1989 Base Model - The Rally Car
- scd88ga
- Registered User
- Posts: 1828
- Joined: Mon Jun 28, 2010 9:02 pm
- Location: Wisconsin Rapids, Wisconsin
- Contact:
Re: Wanted: Beretta parts in PA
Me too! Along with the hundreds of people I've sold parts to over the past few years! I love me some good yard parts!Styluss wrote:Hell, I built my car from yard parts.

'94 Quad 4 H.O. 5 speed Z26, Red & Rare! 1 of 896 Quad Z26's and of those it's 1 of 167 red paint/gray interior!
Need A Quality Used Part? Contact me at Posihead Auto Parts!
https://www.facebook.com/pages/Posihead ... 3779691724
Need A Quality Used Part? Contact me at Posihead Auto Parts!
https://www.facebook.com/pages/Posihead ... 3779691724
Re: Wanted: Beretta parts in PA
if u want a near mint dash go to Harrys u pull in allentown, i always had luck getting good dashes there. 89's might be tougher to get since theres less of them on the road. ezpull is a great place for older cars. theres always a GTZ , z26 or 2 there. i got my GTZ bumper there.
91 Beretta GT26- GT/Z26
-
- Registered User
- Posts: 154
- Joined: Thu May 21, 2009 10:48 am
Re: Wanted: Beretta parts in PA
Come get the dash out of my 90-its fine. No bubbling.
- themixer
- Registered User
- Posts: 1569
- Joined: Fri Aug 14, 2009 12:13 pm
- Location: Truro, Nova Scotia. Canada
Re: Wanted: Beretta parts in PA
someone should get me a 1989 red dash!
Re: Wanted: Beretta parts in PA
ClonedGTZ wrote:if u want a near mint dash go to Harrys u pull in allentown, i always had luck getting good dashes there. 89's might be tougher to get since theres less of them on the road. ezpull is a great place for older cars. theres always a GTZ , z26 or 2 there. i got my GTZ bumper there.
I actually found a few nice silver/gray GTU dashes, but the junkyard won't even quote me a price for it. lol